• 제목/요약/키워드: two-dimensional treatment

검색결과 449건 처리시간 0.029초

시간에 따른 제방붕괴 양상을 고려한 월류량 산정 (Calculation of overtopping discharge with time-dependent aspects of an embankment failure)

  • 김형준;김종호;장원재;조용식
    • 한국방재학회 논문집
    • /
    • 제7권3호
    • /
    • pp.69-78
    • /
    • 2007
  • 본 연구에서는 홍수가 범람하였을 때 제내지에서 발생하는 동역학적 거동을 정확히 모의하기 위해, 시간에 따른 제방붕괴 양상을 고려하여 제방붕괴시 제내지로 유입되는 월류량을 정확하게 산정하였다. 2차원 비선형 천수방정식을 지배방정식으로 사용하였으며, 비구조적 격자계가 적용된 유한체적법을 이용하여 제방붕괴를 모의하였다. 제방붕괴시 발생하는 충격파 흐름을 해석하기 위하여 HLLC approximate Rimann solver를 사용하였고, 수치진동을 제어하기 위해 TVD 제한자를 사용하는 WAF(Weighted Averaged Flux) 기법을 사용하였다. 또한 생성항은 연산자 분리기법을 이용하여 비 물리적인 결과가 나오지 않도록 하였다. 먼저 본 모형을 댐붕괴 문제에 적용하여 댐 붕괴시 발생하는 자유수면 변위를 계산하였으며, 경사식 방파제의 월류량을 산정하여 기존 실험결과와 비교 검증하였다. 그 결과 충격파를 잘 모의하고 있었으며, 월류량 또한 기존 실험결과와 일치하였다. 또한 제방 붕괴시 발생하는 흐름에 대해 높이와 폭을 각각 시간에 따른 함수로 가정하여 적용하였다. 제방붕괴 유형에 따른 월류량을 각각 비교한 결과, 제방이 갑작스럽게 붕괴된 경우에서의 월류량이 점진적으로 붕괴되는 조건에서의 월류량보다 크게 산정됨을 알 수 있었다.

Evaluation of stability after pre-orthodontic orthognathic surgery using cone-beam computed tomography: A comparison with conventional treatment

  • Ann, Hye-Rim;Jung, Young-Soo;Lee, Kee-Joon;Baik, Hyoung-Seon
    • 대한치과교정학회지
    • /
    • 제46권5호
    • /
    • pp.301-309
    • /
    • 2016
  • Objective: The aim of this study was to evaluate the skeletal and dental changes after intraoral vertical ramus osteotomy (IVRO) with and without presurgical orthodontics by using cone-beam computed tomography (CBCT). Methods: This retrospective cohort study included 24 patients (mean age, 22.1 years) with skeletal Class III malocclusion who underwent bimaxillary surgery with IVRO. The patients were divided into the preorthodontic orthognathic surgery (POGS) group (n = 12) and conventional surgery (CS) group (n = 12). CBCT images acquired preoperatively, 1 month after surgery, and 1 year after surgery were analyzed to compare the intergroup differences in postoperative three-dimensional movements of the maxillary and mandibular landmarks and the changes in lateral cephalometric variables. Results: Baseline demographics (sex and age) were similar between the two groups (6 men and 6 women in each group). During the postsurgical period, the POGS group showed more significant upward movement of the mandible (p < 0.05) than did the CS group. Neither group showed significant transverse movement of any of the skeletal landmarks. Moreover, none of the dental and skeletal variables showed significant intergroup differences 1 year after surgery. Conclusions: Compared with CS, POGS with IVRO resulted in significantly different postsurgical skeletal movement in the mandible. Although both groups showed similar skeletal and dental outcomes at 1 year after surgery, upward movement of the mandible during the postsurgical period should be considered to ensure a more reliable outcome after POGS.

Cone Beam형 전산화단층영상을 이용한 상악대구치 발치 후 상악동 함기화 평가 (Maxillary sinus pneumatization after maxillary molar extraction assessed with cone beam computed tomography)

  • 정연화;나경수;조봉혜
    • Imaging Science in Dentistry
    • /
    • 제39권3호
    • /
    • pp.109-113
    • /
    • 2009
  • Purpose : The purpose of this study was to examine the inferior expansion of the maxillary sinus floor following maxillary molar extraction. Materials and Methods : Cone beam computed tomographic images of 59 subjects were used to evaluate the height difference of the maxillary sinus floor between extraction sites and contralateral dentate sites. The height of the maxillary sinus floor was defined as the vertical distance to the Frankfort plane from the level of the anterior nasal spine to the most inferior point of the sinus floor. We examined the difference in sinus pneumatization according to the number of missing teeth and the vertical relationship of the molar roots to the sinus floor. Results : The inferior expansion of the maxillary sinus floor was $1.20{\pm}1.86\;mm$ on the maxillary first molar and $1.90{\pm}2.42\;mm$ on the maxillary second molar. Increased expansion was observed in cases where two proximate molars were extracted. There was no significant difference in sinus pneumatization following extraction according to the vertical relationship of the molar roots to the sinus floor. Conclusion : The results of this study confirm that sinus pneumatization occurs following maxillary molar extraction. In situations where pneumatization can affect treatment after molar extraction, three-dimensional radiography should be considered.

  • PDF

Ca$^2+$ 및 Protein Kinase C가 배양한 계배근원세포의 분화에 미치는 영향 (Effects of $Ca^2+$ and Protein Kinase C on the Chick Myoblast Differentiation)

  • 정기화;김세재;박정원;박영철;이정주
    • 한국동물학회지
    • /
    • 제32권1호
    • /
    • pp.40-47
    • /
    • 1989
  • 계배 근원세포의 배양 배지에 calcium ionophore A23187이나 EGTA를 배양 24시간에 첨가함으로서 초래된 세포내 칼슘 농도의 변화는 근원세포의 분화과정에 상당한 영향을 미쳤다. 배양 24시간에 A23187이나 EGTA를 첨가한 후 배양 48시간, 72시간, 및 96시간에 각각 세포를 [35S]methionine으로 1시간 표지시킨 후 수확하여 2차원 전기영동법으로 단백질을 분리시켰을 때, 일부 단백질은 배양 조건에 따라 합성 양상을 달리함을 보였다. 배양 24시간에 처리한 A23187과 calcium-activated neutral protease는 대조군에 비해 세포융합을 촉진시켰으나 동일 시기에 처리된 phosphoprotein을 정량함으로써 조사하였을 때, A23187이 배양 초기에는 대조군에 비해 약간 이 효소의 활성도를 높이는 효과를 보였으나 세포융합이 완성된 시기인 96시간에는 대조군에 비해 활성도를 높이는 효과를 보였으나 세포융합이 완성된 시기인 96시간에는 대조군에 비해 활성도의 차이를 나타내지 않았다. A23187 및 calcium-activated neutral protease에 의한 세포융합의 촉진, 그리고 A23187에 의한 protein kinase C 활성도의 증가가 모두 근원세포의 융합이 활발히 진행되는 시기인 배양 48-72 시간에 관찰됨을 볼 때, 세포내 칼슘의 농도는 protein kinase C 및 calcium-activated neutral protease와 상호연관을 가지면서 세포분화에 관여하는 것으로 사료된다.

  • PDF

In Vitro 시스템에 의한 화호형성 (In Vitro Flowering System)

  • 류장렬;이행순;이광웅
    • 한국식물학회:학술대회논문집
    • /
    • 한국식물학회 1987년도 식물생명공학 심포지움 논문집 Proceedings of Symposia on Plant Biotechnology
    • /
    • pp.213-237
    • /
    • 1987
  • In vitro flowering system may minimize the confounded influence of non-floral meristem parts of plants in studying the relationship of a given treatment and flowering responses. We have induced flower buds from plantlets regenerated from zygotic embryo-derived somatic embryos of ginseng, which circumvented the normal 2-year juvenile period before flowering. The result suggests that the adulthood of ginseng root explants in the experiment previously conducted by Chang and Hsing (1980; Nature 284: 341-342) is not prerequired to flowering of plantlets regenerated through somatic embryogenesis. We have also induced flower buds from elongated axillary brandches from cotyledonary nodes by culturing ginseng zygotic embryos, seedlings, and excised cotyledonary nodes. It was found that 6-benzyladenine (BA) supplemented to the medium was essential for flowering, whereas abscisic acid (ABA) was inhibitory. Gibberellic acid(GA3) was also required for flowering when ABA was present with BA in the medium. The results suggest that cytokinins, gibberellins, and inhibitors play primary, permissive, and preventive roles, respective-ly, in the induction of flowering of ginseng. Tran Thanh Van (1980; Int. Rev. Cytol., Suppl. IIA: 175-194) has developed the "thin cell layer system" in which the induction of shoots, roots, or flower buds from epidermal layer explants were controlled by culture conditions and exogenous growth regulators in the medium, Utilizing the thin cell layer system, Meeks-Wagner et al. (1989; The Plant Cell 1: 25-35) have cloned genes specifically expressed during floral evocation. However, the system is too tedious for obtaining a sufficient amount of plant materials for biochmical and molecular biological studies of flowering. We have developed a garlic callus culture system and one obvious advantaging over the thin cell layer system is that an abundant cells committed to develope into flower buds proliferate. When the above cells were compared by two-dimensional gel electrophoresis with those which have just lost the competence for developing into flower buds, a few putative proteins specific to floral evocation were detected. The garlic callus culture system can be further explored for elucidation of the molecular biological mechanism of floral evocation and morphogenesis.hogenesis.

  • PDF

Lactobacillus fermentum KLB12의 열 전처리에 따른 열 스트레스 내성 증진 및 프로테옴 변화 (Improved Viability and Proteome Analysis of Lactobacillus fermentum KLB12 upon Heat Stress)

  • 김주현;박미영;김승철;윤현식;소재성
    • KSBB Journal
    • /
    • 제18권4호
    • /
    • pp.294-300
    • /
    • 2003
  • 본 연구에서는 L. fermentum KLB12을 열 전처리 함으로서 제제화 과정 동안 거치게 되는 열 스트레스에 대한 내성이 증진됨을 확인하고, 최적의 열 전처리 조건을 수행하였다. 또한 열 전처리 뿐만 아니라, 저온과 열 전처리 조건에도 열 스트레스에 대한 간섭 효과를 확인하였다. 그리고 내성 증진에 신규 단백질 합성이 필요함을 확인하였으며 나아가, 2-D electrophoresis를 통하여 7개의 신규 단백질을 확인하였다. 따라서 이 균주를 제제화하기 위한 방법으로 열 전처리를 이용할 경우 생균력 유지에 큰 효과를 얻을 수 있다고 사료된다.

LINAC 뇌정위적 방사선 수술시 Multiple Isocenters를 이용한 최적 선량분포 계획 (Optimization of Dose Distribution for LINAC-based Radiosurgery with Multiple Isocenters)

  • 서태석;윤세철;신경섭;박용휘
    • Radiation Oncology Journal
    • /
    • 제9권2호
    • /
    • pp.351-359
    • /
    • 1991
  • LINAC 뇌정위적 방사선 수술은 주로 multiple noncoplanar arc를 이용한 single isocenter를 이용하고 있다. 이러한 방법에 의하면 구형선량 분포를 얻게 되는데, 뇌동정맥 기형이나 뇌종양의 경우 구형이 아닌 임의의 형태를 가진 경우도 많다. 본 논문에서는 임의의 병소형태에 대하여 multiple isocenters를 이용하여 병소모양과 같은 형태의 선량분포를 얻는 방법에 대하여 논하고져 한다. 적당한 조사변수들을 처음에 잘 선정하는 것은, 빠른 시간내에 최적선량 계획을 수행하는데 중요하다. 긴 병소모양에 대하여 같은 형태의 선량분포를 얻기 위한 isocenter 간격 및 조사면에 대한 guideline이 만들어졌다. 특히, 3차원 선량분포를 이용한 multiple isocenters의 응용에 대하여 논하여진다.

  • PDF

Observation of Residual PMMA on Graphene Surface by Using IR-Absorption Mapping

  • Oh, Hye Min;Kim, Yong Hwan;Kim, Hyojung;Park, Doo Jae;Lee, Young Hee;Jeong, Mun Seok
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.292.2-292.2
    • /
    • 2013
  • Graphene, a two-dimensional graphite material consisting of sp2-hybridized carbons. The properties of graphene such as extremely high carrier mobility, high thermal conductivity, low resistivity, large specific make it a promising materail of divices and material. Typically, poly (methyl methacrylate) (PMMA) is used when graphene transfer to other substrates. To remove PMMA on graphene, people used to dip the graphene into the acetone. However, it is known that the remove of PMMA on the graphene is difficult to completely using the acetone. Therefore, to remove the PMMA on the graphene surface, many research groups have employed various methods such as the thermal treatment, photothermal method, and other solvent. Nevertheless, a part of PMMA still remain on graphene surface. Usually, to observe the residual PMMA on graphene surface, topography of graphene surface scanned by atomic force microscopy is used. However, in that case, we can not distinguish PMMA and other particles. In this study, to confirm the residual PMMA on graphene surface, we employed novel measurement technique which is available to distinguish PMMA and other particles by means of photothermal effect.

  • PDF

Reappraisal of Anatomic Outcome Scales of Coiled Intracranial Aneurysms in the Prediction of Recanalization

  • Lee, Jong Young;Kwon, Bae Ju;Cho, Young Dae;Kang, Hyun-Seung;Han, Moon Hee
    • Journal of Korean Neurosurgical Society
    • /
    • 제53권6호
    • /
    • pp.342-348
    • /
    • 2013
  • Objective : Several scales are currently used to assess occlusion rates of coiled cerebral aneurysms. This study compared these scales as predictors of recanalization. Methods : Clinical data of 827 patients harboring 901 aneurysms treated by coiling were retrospectively reviewed. Occlusion rates were assessed using angiographic grading scale (AGS), two-dimensional percent occlusion (2DPO), and volumetric packing density (vPD). Every scale had 3 categories. Followed patients were dichotomized into either presence or absence of recanalization. Kaplan-Meier analysis was conducted, and Cox proportional hazards analysis was performed to identify surviving probabilities of recanalization. Lastly, the predictive accuracies of three different scales were measured via Harrell's C index. Results : The cumulative risk of recanalization was 7% at 12-month, 10% at 24-month, and 13% at 36-month of postembolization, and significantly higher for the second and third categories of every scale (p<0.001). Multivariate-adjusted hazard ratios (HRs) of the second and third categories as compared with the first category of AGS (HR : 3.95 and 4.15, p=0.004 and 0.001) and 2DPO (HR : 4.87 and 3.12, p<0.001 and 0.01) were similar. For vPD, there was no association between occlusion rates and recanalization. The validated and optimism-adjusted C-indices were 0.50 [confidence (CI) : -1.09-2.09], 0.47 (CI : -1.10-2.09) and 0.44 (CI : -1.10-2.08) for AGS, 2DPO, and vPD, respectively. Conclusion : Total occlusion should be reasonably tried in coiling to maximize the benefit of the treatment. AGS may be the best to predict recanalization, whereas vPD should not be used alone.

Bragg-curve simulation of carbon-ion beams for particle-therapy applications: A study with the GEANT4 toolkit

  • Hamad, Morad Kh.
    • Nuclear Engineering and Technology
    • /
    • 제53권8호
    • /
    • pp.2767-2773
    • /
    • 2021
  • We used the GEANT4 Monte Carlo MC Toolkit to simulate carbon ion beams incident on water, tissue, and bone, taking into account nuclear fragmentation reactions. Upon increasing the energy of the primary beam, the position of the Bragg-Peak transfers to a location deeper inside the phantom. For different materials, the peak is located at a shallower depth along the beam direction and becomes sharper with increasing electron density NZ. Subsequently, the generated depth dose of the Bragg curve is then benchmarked with experimental data from GSI in Germany. The results exhibit a reasonable correlation with GSI experimental data with an accuracy of between 0.02 and 0.08 cm, thus establishing the basis to adopt MC in heavy-ion treatment planning. The Kolmogorov-Smirnov K-S test further ascertained from a statistical point of view that the simulation data matched the experimentally measured data very well. The two-dimensional isodose contours at the entrance were compared to those around the peak position and in the tail region beyond the peak, showing that bone produces more dose, in comparison to both water and tissue, due to secondary doses. In the water, the results show that the maximum energy deposited per fragment is mainly attributed to secondary carbon ions, followed by secondary boron and beryllium. Furthermore, the number of protons produced is the highest, thus making the maximum contribution to the total dose deposition in the tail region. Finally, the associated spectra of neutrons and photons were analyzed. The mean neutron energy value was found to be 16.29 MeV, and 1.03 MeV for the secondary gamma. However, the neutron dose was found to be negligible as compared to the total dose due to their longer range.