• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.16 no.2
• /
• pp.166-175
• /
• 1987

The heat loss of a building within a wind flow field results from convection and natural ventilation. Loss from natural ventilation is much more than one from convection, and the former depends mostly on the pressure distribution at the building surface. Therefore, the objective of the present study is to calculate the pressure distribution and investigate flow phenomena, around the building with a rectangular shape in a two-dimensional turbulent flow field. The finite difference method, modelled upon the turbulence $k-\epsilon$ model, has been applied to the analysis. The results, followed by the changes of Reynolds numbers, inlet flow conditions, and building shapes, have been also obtained, respectively. Various results of the present numerical analysis coincide qualitatively well with earlier reported empirical results.

• Korean Journal of Head & Neck Oncology
• /
• v.26 no.2
• /
• pp.204-211
• /
• 2010

Background and Objectives : Boundary detection and drawing are essential in 3D reconstruction of neck mass. Manual tracing methods are popular for drawing head and neck tumor. To improve manual tracing, circular boundaries overlapping was tried. Materials and Methods : Twenty patients with neck tumors were recruited for study. Representative frames were examined for shapes of outline. They were all single closed curves. Circular boundaries were added to fill the outlines of the tumors. Inserted circles were merged to form single closed curves(Circular boundary overlapping, CBO). After surface rendering, 3 dimensional images with volumes and area data were made. Same procedures were performed with manual tracing from same cases. 3D images were compared with surgical photographs of tumors for shape similarity by 2 doctors. All data were evaluated with Mann-Whitney test(p<0.05). Results : Shapes of boundaries from CBO were similar with boundaries from manual tracing. Tumor outlines could be filled with multiple circular boundaries., While both boundary tracing gave same results in small tumors, the bigger tumors showed different data. Two raters gave the similar high scores for both manual and CBO methods. Conclusion : Circular boundary overlapping is time saver in 3 dimensional reconstruction of CT images.

• The Research Journal of the Costume Culture
• /
• v.15 no.2 s.67
• /
• pp.252-264
• /
• 2007

The purpose of this study was to compare two analytical methods classifying foot shape. The methods compared were cluster analysis method and foot index analysis method. This study defined the women's foot shape by these methods. 39 foot measurements which were automatically collected using the three dimensional foot scanner were analyzed. 203 Korean women in age 20s were participated in the anthropometric survey. Their foot shapes were classified into 5 foot types by cluster analysis: short & slim shape, flat shape, short & slender shape with slightly distorted toe, long and big shape, and short & wide shape. The foot measurements were also analyzed by the ratio of foot width and length. Five foot types that were classified by cluster analysis and three foot types that were classified by the foot index were compared. The comparison shows that cluster analysis precisely defined foot shapes. It was suggested that made-to-measure shoes making industry may adopt the foot shape analysis method utilizing cluster analysis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.6
• /
• pp.797-803
• /
• 2014

In this paper, 3D face recognition system is designed by using polynomial based on RBFNNs. In case of 2D face recognition, the recognition performance reduced by the external environmental factors such as illumination and facial pose. In order to compensate for these shortcomings of 2D face recognition, 3D face recognition. In the preprocessing part, according to the change of each position angle the obtained 3D face image shapes are changed into front image shapes through pose compensation. the depth data of face image shape by using Multiple Point Signature is extracted. Overall face depth information is obtained by using two or more reference points. The direct use of the extracted data an high-dimensional data leads to the deterioration of learning speed as well as recognition performance. We exploit principle component analysis(PCA) algorithm to conduct the dimension reduction of high-dimensional data. Parameter optimization is carried out with the aid of PSO for effective training and recognition. The proposed pattern classifier is experimented with and evaluated by using dataset obtained in IC & CI Lab.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3 s.33
• /
• pp.12-20
• /
• 1999

In this paper, method for mapping a three-dimensional shape into the two-dimensional plane will be introduced. This method is referred to geometric modelling and means a transformation between the flat sheet and final surface. The initial blank shape represents the original configuration of the final shape formed into three dimensional surface. The initial constant constant area mapping hypothesis was used in this paper. This technique will be applied to the basic data for an interactive computer design capable of dealing with typical stamping process, including deep parts and complex shapes.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.12
• /
• pp.1031-1037
• /
• 2015

Laser assisted machining (LAM) is an effective method with which to effectively process difficult-to-cut materials. Simple machining processes, such as turning and linear tool paths, have been studied by many researchers. But, there are few research efforts on LAM workpieces using threedimensional shapes because of difficulties controlling the laser heat on workpieces with inclined angles or curved surfaces. Two methods for machining three-dimensional workpieces are proposed in this paper. The first is that the heat source shape and laser focal length are maintained using an index table. Second, a rotary type laser module is controlled using an algorithm to move the laser heat source in all directions. This algorithm was developed to control the rotary type laser module and the machine tool simultaneously. These methods are verified by a CATIA simulation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.10a
• /
• pp.64-73
• /
• 1994

An updated Lagrangian finite element analysis with automatic remeshing scheme is applied to the three-dimensional hot extrusion through landless square dies. In the remeshing procedure, it is very difficult that the meshes are generated automatically with consideration of physical characteristics. In the presented study, the mesh generation is accomplished by modular concept. The generated meshes by modular concept have advantages, especially for three-dimensional problems, such as economized computational time and consideration of physical characteristic. In the problem, orifice shapes of square die are divided into two for the extrusion of solid sections. The orifice adaptive modules are developed for each type and the numerical examples are carried out for each type.

• Journal of Sensor Science and Technology
• /
• v.15 no.5
• /
• pp.357-361
• /
• 2006

This paper reports a new technology to implement complex PDMS microchannels, which are simply constructed using three-dimensional photoresist structures as mold for PDMS replica process. The process utilizes LOR resist as a sacrificial layer to levitate the structural photoresist and multi-step exposure to control the thicknesses of photoresist structures. Various shapes of photoresist structures were successfully fabricated. Using the PDMS replica method, the three-dimensional photoresist structures are demonstrated to be applicable for implementing complex microchannels in PDMS. In addition, more complex multilevel microchannels are constructed by bonding two PDMS layers with just single PDMS alignment.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.6
• /
• pp.302-314
• /
• 2023

PURPOSE. The aim of this study was to classify the shapes of retromolar pads and assess their morphometric differences using a 3D model. MATERIALS AND METHODS. Two hundred fully edentulous or Kennedy Class I partially edentulous patients (400 retromolar pads) were enrolled. Scan data of the definitive mandibular casts produced through functional impressions were obtained using a 3D laser scanner. Seven parameters (transverse diameter, longitudinal diameter, transverse-contour length, longitudinal-contour length, longitudinal/transverse diameter ratio, longitudinal/transverse-contour length ratio, and angle of the retromolar pad line to the residual alveolar ridge line) were measured using image analysis software. Subsequently, the pads were classified according to the shape. Statistical analyses were performed using 95% confidence intervals. RESULTS. Classifying the retromolar pads into three shapes led to high intra-examiner reliability (Cronbach's alpha = 0.933). The pear shape was the most common (56.5%), followed by oval/round (27.7%) and triangular (15.8%) shapes. There were no significant differences between the left and right sides according to the shape and no significant differences in any parameter according to age. The transverse diameter and longitudinal/transverse diameter ratio differed between sexes (P < .05). The triangular shape had a significantly different transverse diameter, transverse-contour length, longitudinal/transverse diameter ratio, and longitudinal/transverse-contour length ratio compared with the pear and oval/round shapes (P < .05). CONCLUSION. From a clinical reliability standpoint, classifying retromolar pads into three shapes (oval/round, pear-shaped, and triangular) is effective. The differences in the sizes among the shapes were attributed to the transverse measurement values.

• Structural Engineering and Mechanics
• /
• v.55 no.3
• /
• pp.495-510
• /
• 2015

Free vibration of non-uniform embedded nanoplates based on classical (Kirchhoff's) plate theory in conjunction with nonlocal elasticity theory has been studied. The nanoplate is assumed to be rested on two-parameter Winkler-Pasternak elastic foundation. Non-uniform material properties of nanoplates have been considered by taking linear as well as quadratic variations of Young's modulus and density along the space coordinates. Detailed analysis has been reported for all possible casesof such variations. Trial functions denoting transverse deflection of the plate are expressed in simple algebraic polynomial forms. Application of the present method converts the problem into generalised eigen value problem. The study aims to investigate the effects of non-uniform parameter, elastic foundation, nonlocal parameter, boundary condition, aspect ratio and length of nanoplates on the frequency parameters. Three-dimensional mode shapes for some of the boundary conditions have also been illustrated. One may note that present method is easier to handle any sets of boundary conditions at the edges.