• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2168-2173
• /
• 2003

Pressure balancing valve is one of important control devices, which is fully automatic and no manual controls, regulating or adjustments are needed. It is typically used to maintain constant temperature of working fluid in power and chemical plants and domestic water supply systems. Pressure balancing valve is composed of body, cylinder and balancing piston. Therefore, the balancing piston shapes are important design parameters for a pressure balancing valve. In this study, numerical and experimental analyses are carried out with two different balancing piston shapes. Especially, the distribution of static pressure is investigated to calculate the flow coefficient($C_v$). The governing equations are derived from making using of three-dimensional Navier-Stokes equations with standard ${\kappa}-{\varepsilon}$ turbulence model and SIMPLE algorithm. Using commercial code, PHOEIC, the pressure and flow fields in pressure balancing valve are depicted.

• 한국산학기술학회논문지
• /
• 제16권8호
• /
• pp.5716-5720
• /
• 2015

본 연구는 연구(I)의 교각의 기하학적 형태에 따른 수리특성을 바탕으로 배수위 영향구간을 분석하고자 2차원 모형(RMA-2)과 1차원 모형(HEC-RAS)을 적용하였다. 교각형상은 교각 설치전을 포함하여 총 6개(사각형, 마름모, 팔각형, 타원형, 원형)로 구분하였으며 배수위 영향구간 분석결과 HEC-RAS의 경우 배수위 영향구간이 약 150m~200m, RMA-2모형의 경우 모든 교각형상에서 약 50m의 배수위 영향구간을 보였다. RMA-2모형의 결과는 HEC-RAS의 결과와 직접적인 비교에는 어려움이 있었으나 타원형의 수리특성이 설치전과 유사한 결과를 보이고 있어 교각 설치시 타원형이 가장 안정적인 교각이라 판단되며, 향후 신설교량설치 및 교각형상 선정시 도움을 줄 수 있을 것으로 판단된다.

• 한국전통조경학회지
• /
• 제36권4호
• /
• pp.94-104
• /
• 2018

본 연구는 사진측량 기술을 과거의 촬영된 사진들에 활용하여 정원유산의 원형 재현 가능성을 검토하였다. 인공물과 자연물이 혼재되어 입체 형상 재현 가능성 검토에 적합한 담양 소쇄원(명승 제40호)을 연구 대상으로 하였다. 소쇄원에서 근거리와 원거리의 $360^{\circ}$ 전방향에서 장애물이 없어 촬영이 가능한 조경시설물인 매대(梅臺), 애양단(愛陽壇), 오곡문(五曲門) 담장, 약작(略?)과 자연경물인 광석(廣石) 5개 조경요소를 선정하였다. 인터넷 포털에서 5개 조경요소에 대해 촬영날짜, 초점길이, 노출 등의 정보가 포함된 151장의 사진을 수집하여 촬영구도를 분석하였다. 수집된 사진들은 요소별로 특정한 구도에서 집중적으로 촬영되는 경향을 발견하였다. 또한 조경요소별로 이용자들이 선호하는 2~3개의 촬영구도가 있음을 발견하였다. 조경요소별로 빈도가 높은 촬영구도 1개를 선정하고 그 구도에서 촬영된 사진들을 이용하여 포토스캔(Photoscan) 프로그램으로 3D 메쉬 모델을 제작하여 입체 형상의 재현 가능성을 분석하였다. 제작결과 오곡문 담장, 매대, 애양단과 같은 인공물은 비교적 입체 형상의 재현이 가능하였으나, 질감이 동일하거나 자연 경물인 약작과 광석은 입체 형상의 재현이 불가능했다. 선정된 촬영구도와 유사하게 현장에서 촬영한 사진으로 입체 형상의 재현을 실험한 결과 수집사진에서 불가능했던 약작과 광석에서 3D 메쉬 모델이 제작되었다. 또한 과거와 현재의 형상 비교를 통해 정확한 크기를 측정할 수 있고 변화를 발견할 수 있었다. 문화재의 관람객이나 조경가 등에 의해 촬영된 과거의 사진들을 확보하게 된다면 그 당시에 입체 형상을 재현할 수 있을 것으로 보인다. 이러한 기술이 확산된다면 정원유산의 과거 형상을 추정하고 변화를 고찰하는데 정확성과 신뢰성을 높일 것이다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.262-265
• /
• 2007

Metallic sandwich plates constructed of two face sheets and low relative density cores have lightweight characteristics and various static and dynamic load bearing functions. To predict the formability and performance of these structured materials, a computationally efficient FE-analysis method incorporating virtual equivalent projected model has been newly introduced for analysis of metallic sandwich plates. Two dimensional models using the projected shapes of 3D structures have the same equivalent elastic-plastic properties with original geometries including anisotropic stiffness, yield strength and linear hardening function. The projected shapes and virtual properties of the virtual equivalent projected model have been estimated analytically with the same equivalent properties and face buckling strength of 3D pyramidal truss core.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.190-193
• /
• 2004

Ever since the ideal forming theory has been developed fur process design purposes, application has been limited to sheet forming and, for bulk forming, to two-dimensional steady flow. Here, application for the non-steady case was performed under the plane-strain condition based on the theory previously developed. In the ideal flow, material elements deform following the minimum plastic work path (or mostly proportional true strain path) so that the ideal plane-strain flow can be effectively described using the two-dimensional orthogonal convective coordinate system. Besides kinematics, for a prescribed final part shape, schemes to optimize a preform shape out of a class of initial configurations and also to define the evolution of shapes and boundary tractions were developed. Discussions include the two problematic issues on internal tractions and the non-monotonous straining. For demonstration purposes, numerical calculations were made for a bulk part under forging.

• 한국해양공학회지
• /
• 제36권4호
• /
• pp.270-279
• /
• 2022

In this study, numerical analysis and experiments were performed to analyze the viscous damping effect according to the shape of the chamber skirt of the breakwater-linked inclined oscillating water column wave energy converter. Experiments were conducted using a two-dimensional mini wave tank and verified by comparing the results of a computational fluid dynamics numerical analysis. Pointed and rounded skirts were modeled to compare the effect of viscous damping when incident waves enter the chamber, and the difference in the displacement of the water surface in the chamber was compared according to the wave period for the two skirt shapes. The wave elevation in the chamber in the rounded-skirt condition was larger than the pointed-skirt condition in all wave periods, which was approximately 47% greater at 0.9 s of the incident wave period. Therefore, extracting the maximum energy through the optimal orifice is possible while minimizing the energy attenuation in the rounded-skirt condition.

• 한국의류학회지
• /
• 제38권3호
• /
• pp.305-320
• /
• 2014

This study identifies the foot shapes of elderly women by classifying foot type according to the 3D shape of the foot and 2D sole type analyzing individual characteristics. The subjects were 295 elderly women over 60 years of age who live in Gwangju. A foot scanner (K&I Technology $Nexcan^{(R)}$) was used to obtain three-dimensional shapes of feet and a flat bad scanner (HP Scanjet G2410) was used to obtain the two-dimensional shapes of soles. The anthropometric measuring items consisted of 59 items estimated on the right foot of each subject. Data were analyzed by various statistical methods such as factor analysis, ANOVA and cluster analysis using the SPSS 19.0 statistical program. To classify the side type of elderly women's feet, three-dimensional measurement data were analyzed for the 27 measurement items using factor analysis and 6 factors were extracted (inside height and side gradient, ankle thickness, toe height and midfoot size, lateral malleolus height, instep, and heel height and gradient). A cluster analysis resulted in three types: 36.5% belonged to Type 1 (high forefoot and high midfoot), 31.1% belonged to Type 2 (high forefoot and low midfoot), and 32.4% belonged to Type 3 (low forefoot and high midfoot). The distribution was relatively even. For the sole, 8 factors were extracted (ball width and medial foot protrusion, lateral foot protrusion, forefoot and hindfoot length ratio, ball gradient, heel size, toe breadth, lateral ball length, and foot length) and a cluster analysis resulted in three Types (Type H, Type D, and Type A). The largest proportion (42.7%) belonged to Type H, which is the same as the elderly men's case.

• 천문학회보
• /
• 제38권2호
• /
• pp.37.2-37.2
• /
• 2013

Recently it turns out that simple-looking elliptical galaxies and lenticular galaxies are more complex and intriguing than expected. One of the most surprising and intriguing findings in extragalactic studies during the last two decades is a discovery that color distribution of the globular clusters in these galaxies is bimodal, suggesting that there are two subpopulations: blue and red globular clusters. We present a determination of the two-dimensional shape parameters of the blue and red globular cluster systems (GCSs) in a large number of bright elliptical galaxies and lenticular galaxies. The position angles of both and red GCSs show a correlation with those of the stellar light distribution, showing that the major axes of the GCSs are well aligned with those of their host galaxies. However, the shapes of the red GCSs show a tight correlation with the stellar light distribution as with the rotation property of their host galaxies, while the shapes of the blue GCSs do much less. These provide clear geometric evidence that the origins of the blue and red globular clusters are distinct and that these galaxies may have dual halos: a blue (metal-poor) halo and a red (metal-rich) halo. These two halos show significant differences in metallicity, structure, and kinematics, indicating that they are formed in two distinguishable ways. The red halos might have formed via dissipational processes with rotation, while the blue halos are through accretion.

• 한국의상디자인학회지
• /
• 제18권4호
• /
• pp.63-75
• /
• 2016

This study examines the organic geometry in Isabel Toledo's collections in terms of the practicality of American sportswear tradition. This study conducts literary survey combined with case analysis of Toledo's works from her debut collection in 1985 to the recent ones. The organic geometry in Toledo's designs refers to the conversion of two-dimensional garment patterns into three-dimensional garment forms with the body as a medium, which is classified into the following categories in this study. First, 'fluidity' describes Toledo's highly fluid jersey dresses which maintain consistent structures by patchwork draping and suspension technique. Second, 'reductionist structure' illustrates that simple geometric shapes such as circles and squares disappear as soon as worn on the body. Third, 'origami construction' explains folding two-dimensional fabrics into three-dimensional forms, which causes the outlines of the body to appear abstract. Toledo's designs deliver the tradition of American sportswear through the organic geometry of garment construction. Toledo's works are authentic American in the aspects that they are functional and modern; they satisfy the practical needs, prioritize the movements of wearers, pursue multi-functions, and their ornamental elements are accompanied by the construction of garments. Isabel Toledo presents designs drawing on her unwavering aesthetics while continuously developing and experimenting creative ways of garment construction.

• Structural Engineering and Mechanics
• /
• 제44권5호
• /
• pp.681-704
• /
• 2012

The dynamic response of Euler-Bernoulli beams to resonant harmonic moving loads is analysed. The non-dimensional form of the motion equation of a beam crossed by a moving harmonic load is solved through a perturbation technique based on a two-scale temporal expansion, which permits a straightforward interpretation of the analytical solution. The dynamic response is expressed through a harmonic function slowly modulated in time, and the maximum dynamic response is identified with the maximum of the slow-varying amplitude. In case of ideal Euler-Bernoulli beams with elastic rotational springs at the support points, starting from analytical expressions for eigenfunctions, closed form solutions for the time-history of the dynamic response and for its maximum value are provided. Two dynamic factors are discussed: the Dynamic Amplification Factor, function of the non-dimensional speed parameter and of the structural damping ratio, and the Transition Deamplification Factor, function of the sole ratio between the two non-dimensional parameters. The influence of the involved parameters on the dynamic amplification is discussed within a general framework. The proposed procedure appears effective also in assessing the maximum response of real bridges characterized by numerically-estimated mode shapes, without requiring burdensome step-by-step dynamic analyses.