• Radiation Oncology Journal
• /
• 제9권2호
• /
• pp.351-359
• /
• 1991

LINAC 뇌정위적 방사선 수술은 주로 multiple noncoplanar arc를 이용한 single isocenter를 이용하고 있다. 이러한 방법에 의하면 구형선량 분포를 얻게 되는데, 뇌동정맥 기형이나 뇌종양의 경우 구형이 아닌 임의의 형태를 가진 경우도 많다. 본 논문에서는 임의의 병소형태에 대하여 multiple isocenters를 이용하여 병소모양과 같은 형태의 선량분포를 얻는 방법에 대하여 논하고져 한다. 적당한 조사변수들을 처음에 잘 선정하는 것은, 빠른 시간내에 최적선량 계획을 수행하는데 중요하다. 긴 병소모양에 대하여 같은 형태의 선량분포를 얻기 위한 isocenter 간격 및 조사면에 대한 guideline이 만들어졌다. 특히, 3차원 선량분포를 이용한 multiple isocenters의 응용에 대하여 논하여진다.

• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.775-786
• /
• 2002

A Mixed Volume and Boundary Integral Equation Method is applied for the effective analysis of elastic wave scattering problems and plane elastostatic problems in unbounded solids containing general anisotropic inclusions and voids or isotropic inclusions. It should be noted that this newly developed numerical method does not require the Green's function for anisotropic inclusions to solve this class of problems since only Green's function for the unbounded isotropic matrix is involved in their formulation for the analysis. This new method can also be applied to general two-dimensional elastodynamic and elastostatic problems with arbitrary shapes and number of anisotropic inclusions and voids or isotropic inclusions. In the formulation of this method, the continuity condition at each interface is automatically satisfied, and in contrast to finite element methods, where the full domain needs to be discretized, this method requires discretization of the inclusions only. Finally, this method takes full advantage of the pre- and post-processing capabilities developed in FEM and BIEM. Through the analysis of plane elastostatic problems in unbounded isotropic matrix with orthotropic inclusions and voids or isotropic inclusions, and the analysis of plane wave scattering problems in unbounded isotropic matrix with isotropic inclusions and voids, it will be established that this new method is very accurate and effective for solving plane wave scattering problems and plane elastic problems in unbounded solids containing general anisotropic inclusions and voids/cracks or isotropic inclusions.

• 비파괴검사학회지
• /
• 제21권1호
• /
• pp.69-79
• /
• 2001

다수의 이방성 함유체를 포함하는 등방성 무한고체에서 이들 이방성 함유체에 의한 탄성파의 산란문제 해석을 효과적으로 수행할 수 있는 새로은 수치해석 방법으로 체적 적분방정식법을 제시하였다. 체적 적분방정식법에서는 등방성 무한고체에서의 Green 함수만 구할 수 있으면 이방성 함유체에서의 Green 함수를 구하지 않고서도 탄성파 산란문제 해석이 가능해지는 장점이 있다. 이 방법은 임의의 형상을 갖는 다수의 이방성 함유체가 포함된 일반적인 탄성동역학 문제 해석에도 적용이 가능하다. 한 개의 직교이방성 함유체가 등방성 무한기지에 포함된 무한고체에서 직교이방성 함유체에 의한 종과(P파) 및 횡파(SV파) 산란문제 해석을 통하여, 체적 적분방정식법이 일반적인 이방성 함유체가 포함된 무한고체에서의 탄성파 산란문제 해석에 있어 정확하고 효과적인 수치해석 방법임을 입증하였다.

• Smart Structures and Systems
• /
• 제19권1호
• /
• pp.39-46
• /
• 2017

Finite element model updating is very effective procedure to determine the uncertainty parameters in structural model and minimize the differences between experimentally and numerically identified dynamic characteristics. This procedure can be practiced with manual and automatic model updating procedures. The manual model updating involves manual changes of geometry and analyses parameters by trial and error, guided by engineering judgement. Besides, the automated updating is performed by constructing a series of loops based on optimization procedures. This paper addresses the ambient vibration based finite element model updating of long span reinforced concrete highway bridges using manual model updating procedure. Birecik Highway Bridge located on the $81^{st}km$ of Şanliurfa-Gaziantep state highway over Firat River in Turkey is selected as a case study. The structural carrier system of the bridge consists of two main parts: Arch and Beam Compartments. In this part of the paper, the arch compartment is investigated. Three dimensional finite element model of the arch compartment of the bridge is constructed using SAP2000 software to determine the dynamic characteristics, numerically. Operational Modal Analysis method is used to extract dynamic characteristics using Enhanced Frequency Domain Decomposition method. Numerically and experimentally identified dynamic characteristics are compared with each other and finite element model of the arch compartment of the bridge is updated manually by changing some uncertain parameters such as section properties, damages, boundary conditions and material properties to reduce the difference between the results. It is demonstrated that the ambient vibration measurements are enough to identify the most significant modes of long span highway bridges. Maximum differences between the natural frequencies are reduced averagely from %49.1 to %0.6 by model updating. Also, a good harmony is found between mode shapes after finite element model updating.

• 공업화학
• /
• 제30권1호
• /
• pp.23-28
• /
• 2019

탄소 실의 표면에 코팅 된 3차원 다공성 그래핀으로 구성된 슈퍼커패시터 케이블 소자를 보고하고자 한다. 그래핀의 3D 다공성 구조는 그래핀옥사이드로 코팅된 탄소 실을 사용하여 마이크로웨이브 활성화 방법에 의해 제작하였다. 마이크로파 조사의 사용은 환원제 없이 그래핀옥사이드를 환원된 그래핀옥사이드로 전환시키고 그래핀 시트를 박리 및 다공성 그래핀 시트로 활성화시켰다. 두 개의 와이어 전극을 고분자 겔 전해질과 결합하여 성공적으로 케이블 구조 형태의 슈퍼커패시터 소자를 제작하였다. 슈퍼커패시터 케이블은 매우 유연하기 때문에 다양한 형태의 장치로 변형될 수 있고 섬유 품목으로 통합될 수 있다. 주사 속도 10 mV/s에서 38.1 mF/cm의 높은 정전용량이 얻어졌다. 이용량은 500 mV/s에서 원래 값의 88%를 유지하였다. 장수명특성은 구부러진 형태에서도 10,000회 동안 충전/방전 과정을 반복함으로써 96.5%의 높은 정전용량 유지율을 증명하였다.

• 한국의학물리학회지:의학물리
• /
• 제30권1호
• /
• pp.32-38
• /
• 2019

Purpose: The objective of this study is to evaluate the geometrical accuracy of a patient-specific bolus based on a three-dimensional (3D) printed mold and casting method. Materials and Methods: Three breast cancer patients undergoing treatment for a superficial region were scanned using computed tomography (CT) and a designed bolus structure through a treatment planning system (TPS). For the fabrication of patient-specific bolus, we cast harmless certified silicone into 3D printed molds. The produced bolus was also imaged using CT under the same conditions as the patient CT to acquire its geometrical shape. We compared the shapes of the produced bolus with the planned bolus structure from the TPS by measuring the average distance between two structures after a surface registration. Results and Conclusions: The result of the average difference in distance was within 1 mm and, as the worst case, the absolute difference did not exceed ${\pm}2mm$. The result of the geometric difference in the cross-section profile of each bolus was approximately 1 mm, which is a similar property of the average difference in distance. This discrepancy was negligible in affecting the dose reduction. The proposed fabrication of patient-specific bolus is useful for radiation therapy in the treatment of superficial regions, particularly those with an irregular shape.

• 한국인터넷방송통신학회논문지
• /
• 제19권1호
• /
• pp.247-252
• /
• 2019

다층 주기 구조에 의한 광 신호의 회절 특성은 기본 격자구조와 연계된 Fourier 확장을 사용하여 2D 공간에서 공식화 된다. 그때 각 층에서의 필드들은 특성 모드에 의하여 표현되며, 완전한 해는 적절한 경계 값 문제에 의존하는 모드 전송선로이론(MTLT)을 사용하여 정확하게 얻을 수 있다. 이러한 해석법은 일반적으로 다층 구조에 평행 또는 수직 방향에 따라 광학 특성을 갖는 임의의 형태의 유전체 성분을 포함하는 모든 주기적 격자들을 처리할 수 있다. 본 논문은 간단한 주기적인 원형 2D-구조에 대하여 과거에 보고된 데이터와 비교하여 현 해석법을 설명하였다. 또한 제시한 해석법은 가능한 표준 형태와 높은 유전율을 가지는 복수의 주기적인 영역을 포함하는 매우 복잡한 구조들에 대하여 쉽게 적용할 수 있다.

• 디지털융복합연구
• /
• 제17권1호
• /
• pp.203-208
• /
• 2019

본 논문은 객체 특징 탐색을 이용한 실시간 가상 모델 동기화 알고리즘을 제안한다. 제안된 알고리즘은 2차원 영상에서 객체 특징 탐색을 사용하여, 실제 객체와 가상모델을 실시간으로 동기화 한다. 객체 특징 탐색 알고리즘은 색상을 이용하여 객체를 개별적으로 분류하는 알고리즘과 각도를 이용하여 객체가 설치된 방향을 분석하는 알고리즘으로 구성된다. 제안한 알고리즘을 사용하여 실제 물체의 움직임을 가상 모델에 동기화함으로써, 별도의 사용자 조작 도구 사용 없이 손을 사용하여 가상 물체를 움직이는 환경을 제공할 수 있다. 본 알고리즘은 향후 불특정한 모양과 색상 및 방향을 갖는 객체를 동기화하는 연구를 진행하며, VR/AR기술에 적용하여 사실적인 가상환경을 제공하는 것을 목표로 한다.

• 한국의류학회지
• /
• 제45권5호
• /
• pp.881-891
• /
• 2021

This study proposes a simple drape measurement method for the 3D virtualization of garments. The proposed method uses angles or disks of different diameters to evaluate the drape properties easily. We divided 710 fabrics into ten groups based on the drape coefficient, of which 49.6% had drape coefficients of 30 or less. The drape properties were measured to classify the groups into smaller clusters using the angle formed when the center of the fabric was fixed. Accordingly, three clusters were formed for 60° and 100° angles. A method was devised using ten disks of different diameters to classify the remaining two clusters, except the cluster containing only the D10 group (D1-D5 and D5-D9). Three criteria-grade match, a sum of deviation, and standardization of deviation-were used for the classifications. The discriminative ability between groups was high for D1-D5 with disks with 24.0 and 25.5 cm diameters. Furthermore, a disk with a diameter of 16.5 cm was effective for D5-D9. The three-dimensional drape shapes were unique for the ten groups, which can be utilized as fundamental data for 3D virtualization.

• Steel and Composite Structures
• /
• 제44권2호
• /
• pp.155-169
• /
• 2022

In the present paper an analytical model was developed to study the non-linear vibrations of Functionally Graded Carbon Nanotube (FG-CNT) reinforced doubly-curved shallow shells using the Multiple Scales Method (MSM). The nonlinear partial differential equations of motion are based on the FGM shallow shell hypothesis, the non-linear geometric Von-Karman relationships, and the Galerkin method to reduce the partial differential equations associated with simply supported boundary conditions. The novelty of the present model is the simultaneous prediction of the natural frequencies and their mode shapes versus different curvatures (cylindrical, spherical, conical, and plate) and the different types of FG-CNTs. In addition to combining the vibration analysis with optimization algorithms based on the genetic algorithm, a design optimization methode was developed to maximize the natural frequencies. By considering the expression of the non-dimensional frequency as an objective optimization function, a genetic algorithm program was developed by valuing the mechanical properties, the geometric properties and the FG-CNT configuration of shallow double curvature shells. The results obtained show that the curvature, the volume fraction and the types of NTC distribution have considerable effects on the variation of the Dimensionless Fundamental Linear Frequency (DFLF). The frequency response of the shallow shells of the FG-CNTRC showed two types of nonlinear hardening and softening which are strongly influenced by the change in the fundamental vibration mode. In GA optimization, the mechanical properties and geometric properties in the transverse direction, the volume fraction, and types of distribution of CNTs have a considerable effect on the fundamental frequencies of shallow double-curvature shells. Where the difference between optimized and not optimized DFLF can reach 13.26%.