• Journal of applied mathematics & informatics
• /
• 제30권3_4호
• /
• pp.463-475
• /
• 2012

In this work, we investigate solving two-dimensional nonlinear Volterra integral equations of the first kind (2DNVIEF). Here we convert 2DNVIEF to the two-dimensional linear Volterra integral equations of the first kind (2DLVIEF) and then we solve it by using operational approach of the Tau method. But for solving the 2DLVIEF we convert it to an equivalent equation of the second kind and then by giving some theorems we formulate the operational Tau method with standard base for solving the equation of the second kind. Finally, some numerical examples are given to clarify the efficiency and accuracy of presented method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.46-49
• /
• 2005

In this paper, a novel 2D/3D convertible display system based on integral imaging is proposed. Combining two liquid crystal display panels with integral imaging, it is possible to convert the display between two-dimensional mode and three-dimensional mode without mechanical movement. The proposed method is proven by preliminary experiments.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.353-362
• /
• 1993

The purpose of this study is to develop a crop-row detector which can be applied to an automatic row following control for cultivators or thinning machines. In this report, a possibility of new crop-row detecting method was discussed. This detecting method consists of two principal means. One is the hardware means to convert the two dimensional crop-row vision to the compacted one dimensional information. The conversion is achieved by a color line sensor and a rotating mirror. In order to extract crop-row , R and G signals of RGB color system are used. The locations of two different points on the target row are detected by this means. Another is the software means to estimate the offset value and the heading angle between the detector and the target row which can be assumed as a straight line. As a result of discussion, it was concluded that this detecting method would be accurate enough for practical use.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권3호
• /
• pp.288-295
• /
• 2011

This paper addresses minimum-fuel, two-dimensional trajectory optimization for a soft lunar landing from a parking orbit to a desired landing site. The landing site is usually not considered when performing trajectory optimization so that the landing problem can be handled. However, for precise trajectories for landing at a desired site to be designed, the landing site has to be considered as the terminal constraint. To convert the trajectory optimization problem into a parameter optimization problem, a pseudospectral method was used, and C code for feasible sequential quadratic programming was used as a numerical solver. To check the reliability of the results obtained, a feasibility check was performed.

• 한국정보통신학회논문지
• /
• 제16권11호
• /
• pp.2453-2458
• /
• 2012

본 논문에서는 2차원 바코드 영상을 위한 적응적 이진화 방법을 제안한다. 적응형 이진화 방법은 조명의 영향을 최소화하여 이진화를 수행하는 기술이다. 적응적 이진화 방법은 주로 문서 영상에 맞게 발전되어 왔다. 기존 방법들은 적응적 이진화에서 사용되는 박스에 대한 크기 설정 문제를 가지고 있다. 이 문제로 기존 방법들은 이차원 바코드 영상 인식에 적용하기에 부적절하다. 문제점을 극복하기 위해 먼저 박스크기와 기존 방법들의 문제점을 분석하고, 이를 기반으로 적분영상을 사용한 새로운 적응형 이진화 방법을 소개한다. 제안한 방법의 성능 입증을 위해 기존의 방법과 속도, 성능 비교 실험을 수행하였고 실험 결과는 기존 방법보다 우수함을 입증하였다.

• 한국멀티미디어학회논문지
• /
• 제17권12호
• /
• pp.1446-1452
• /
• 2014

Existing LDA uses the transform matrix that maximizes distance between classes. So we have to convert from an image to one-dimensional vector as training vector. However, in 2D-LDA, we can directly use two-dimensional image itself as training matrix, so that the classification performance can be enhanced about 20% comparing LDA, since the training matrix preserves the spatial information of two-dimensional image. However 2D-LDA uses same calculation schema for transformation matrix and therefore both LDA and 2D-LDA has the heteroscedastic problem which means that the class classification cannot obtain beneficial information of spatial distances of class clusters since LDA uses only data correlation-based covariance matrix of the training data without any reference to distances between classes. In this paper, we propose a new method to apply training matrix of 2D-LDA by using WPS-LDA idea that calculates the reciprocal of distance between classes and apply this weight to between class scatter matrix. The experimental result shows that the discriminating power of proposed 2D-LDA with weighted between class scatter has been improved up to 2% than original 2D-LDA. This method has good performance, especially when the distance between two classes is very close and the dimension of projection axis is low.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2022년도 제66차 하계학술대회논문집 30권2호
• /
• pp.57-58
• /
• 2022

Sleep apnea (SA) is a common chronic sleep disorder that disrupts breathing during sleep. Clinically, the standard for diagnosing SA involves nocturnal polysomnography (PSG). However, this requires expert human intervention and considerable time, which limits the availability of SA diagnoses in public health sectors. Therefore, ECG-based methods for SA detection have been proposed to automate the PSG procedure and reduce its discomfort. We propose a preprocessing method to convert the one-dimensional time series of ECG into two-dimensional images using the Gramian Angular Field (GAF) algorithm, extract temporal features, and use a two-dimensional convolutional neural network for classification. The results of this study demonstrated that the proposed method can perform SA detection with specificity, sensitivity, accuracy, and area under the curve (AUC) of 88.89%, 81.50%, 86.11%, and 0.85, respectively. Our experimental results show that SA is successfully classified by extracting preprocessing transforms with temporal features.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권1호
• /
• pp.74-89
• /
• 2021

For higher-level requirements of urban planning and management and the recent development of "digital earth" and "digital city", it is urgent to establish protocols for the construction of three-dimensional digital city models. However, some problems still exist in the digital technology of the three-dimensional city model, such as insufficient precision of the three-dimensional model, not optimizing the scene and not considering the constraints of building codes. In view of those points, a method to interactively simulate a virtual city scene based on building codes is proposed in this paper. Firstly, some constraint functions are set up to restrict the models to adhere to the building codes, and an improved directional bounding box technique is utilized to solve the problem that geometric objects may intersect in a virtual city scene. The three-dimensional model invocation strategy is designed to convert two-dimensional layouts to a three-dimensional urban scene. A Leap Motion hardware device is used to interactively place the 3D models in a virtual scene. Finally, the design and construction of the three-dimensional scene are completed by using Unity3D. The experiment shows that this method can simulate urban virtual scenes that strictly adhere to building codes in a virtual scene of the city environment, but also provide information and decision-making functions for urban planning and management.

• 한국광학회지
• /
• 제20권1호
• /
• pp.16-22
• /
• 2009

본 논문에서는 2차원 동영상을 normalized cut과 optical flow를 이용하여 3차원 동영상으로 변환하는 방법을 제안하였다. 이를 통해 특정 디스플레이 장치와 특정 동영상 포맷에 국한되지 않는 2차원 동영상의 3차원 동영상 변환 방법을 제안하였다. 본 연구에서는 2차원 동영상의 3차원 변환을 위하여 먼저 영상을 객체로 분할하고, 분할된 객체의 깊이를 추정하는 방법을 사용하였다. Normalized cut은 영상분할의 한 방법으로, 본 연구에서는 연산속도 향상을 위하여 기존 방법에 watershed 알고리즘을 적용하였고, 정확도 향상을 위하여 가중치에 optical flow를 추가하였다. Normalized cut을 이용하여 분할된 영상의 깊이 정보를 추정하기 위하여 optical flow를 이용하였다. Optical flow의 차이를 통해 정의할 수 있는 가려진 영역의 분할 영상 변화를 통해 순서적 깊이 정보를 추정한다. 추정된 순서적 깊이를 보정하기 위해 optical flow의 절대적 크기를 이용해 운동시차로 상대적 깊이를 추정하였다. 최종적으로 추정된 깊이 정보는 순서적 깊이와 상대적 깊이의 곱을 평균 optical flow로 나누어, 순서적 깊이의 차이를 보정하였다. 제안한 방법의 검증을 위하여 2차원 동영상을 3차원 동영상으로 변환하여 깊이 정보가 추정됨을 확인하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.210-213
• /
• 2004

We study the fracture behavior of the lumbar No.4 and No.5 vertebra subjected to posteroanterior (PA) forces, a three dimensional finite element method (FEM). The lumbar spine was modeled 3-dimensionally using commercial software based on the principle of convert stacked two dimensional CT scan images into three dimensional shapes. Determination of the boundary conditions corresponding to actual surgical conditions was not easy, so that the simplified spine beam analyses were performed. The results were used in three dimensional finite element (FE) analysis. This FE analysis, indicates that the fracture loads of the lumbar No.4 and No.5 vertebra are respectively 1550 N and 1500 N. These fracture loads are for static loading, but in actual conditions the load on the lumbar spine varies dynamically. We found that the fracture load of lumbar No.4 vertebra is larger than that of lumbar No.5 vertebra, as a result of the total stress difference by the moment.