• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.67-69
• /
• 1998

In order to design or predict the performance of a cylindrical electrostatic motor it is necessary to analyze the torque generated by such a structure. In this paper a simple but sufficiently accurate analytical model is developed for use in design. Conformal mapping are used to model the capacitance and torque of the motor as a function of the rotor position, using a quasi-static, two-dimension approximation, the effect of an insulating dielectric layer on the stator or rotor is also evaluated.

• Structural Engineering and Mechanics
• /
• 제8권3호
• /
• pp.273-283
• /
• 1999

Two physical experiments are performed to verify the effectiveness of beam-particle model for simulating the progressive failure of particulate composites such as sandstone and concrete. In the numerical model, the material is schematized at the meso-level as an assembly of discrete, interacting particles which are linked through a network of brittle breaking beams. The uniaxial compressive tests of cubic and parallelepipedal specimens made of carbon steel rod assembly which are glued together by a mixture are represented. The crack patterns and load-displacement response observed in the experiments are in good agreement with the numerical results. In the application respect of beam-particle model to the particulate composites, the influence of defects, particle arrangement and boundary conditions on crack propagation is approached, and the correlation existing between the cracking evolution and the level of loads imposed on the specimen is characterized by fractal dimensions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1435-1437
• /
• 2005

An integrated inductor using the low temperature cofiring ceramics(LTCC) NiZnAg was fabricated. The inductor has a sandwitch structure, which consists of 18 turns-and-thin Ag rectangular spiral coils in 2-layers(10-turn & 8-turn in each layer). The two layers of Ag coils are among three thick Ni-Zn ferrite so the inductor has a dimension of 12.70mm$\times$12.70mm and 0.32mm thick. For the fabricated inductor, calculation method of inductance was given and it is confirmed that the calculated value is very close to the measured one. Finally as an application of the LTCC integrated inductor for low power electronic circuits, a LTCC boost DC/DC converter with 1W output power and 500KHz switching frequency using the inductor fabricated was developed. For the converter the maximum efficiency of about 87% was obtained.

• Transactions on Electrical and Electronic Materials
• /
• 제9권5호
• /
• pp.193-197
• /
• 2008

On the purpose of increasing resonant frequency without sacrificing quality factor as well as much decreasing dimensions, corrugated micro beam resonator based on polycrystalline 3C-SiC films is the applicable solution. In this work, appropriate corrugated structure is suggested to increase resonant frequency of resonators. Micro beam resonators based on 3C-SiC films which have a two-side corrugation along the length of beams were simulated by finite element method and compared to a same-size flat rectangular. With the dimension of 36x12x0.5 ${\mu}m^{3}$, the flat cantilever has resonant frequency of 746 kHz. Meanwhile, with this size but corrugation width of 6 ${\mu}m$ and depth of 0.4 ${\mu}m$, the corrugated cantilever reaches the resonant frequency at 1.252 MHz.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.482-484
• /
• 2008

Anodic aluminum oxide (AAO) which prepared with two-step anodizing method (with dissimilar solutions) was used as a template to fabricate highly ordered, free standing metal nano-rods. AAO nano-template technique can realize self-organized hexagonal pore structure with nanometer dimension size, it's easy to control pore diameter, length and density by varying anodizing conditions. Ni and Ni/Fe/Cu multi-metal layer nanorods were electrochemically deposited into AAO nano-template by AC voltage in simple sulfate solutions.. The properties of samples are tested by X-ray diffraction (XRD), field emission microscopy (FE-SEM).

• 대한의용생체공학회:의공학회지
• /
• 제17권4호
• /
• pp.459-468
• /
• 1996

This paper considers the problem of realising a parallel EMG identifier used in FES (functional electrical stimulation) system on a fixed dimension transputer array. This involves using an identifiestion algorithm in the wavelet transform domain. This algorithm have suggested by the authors in a previous paper(6). The transputer serial links permit higtlly varied and economic network-type connections and the structure enables rapid topological reconfiguration. Analysing the results Showed that the Speed-UPS ranged from 1.82 to 3.44 With 2-4 transputers for corresponding model order, and from 1.82 to 3.97 with increasing the model orders when two and four transputers are used respectively.

• 대한건축학회논문집:구조계
• /
• 제35권10호
• /
• pp.191-198
• /
• 2019

In this paper the evaluation scheme for determining torsional irregularity of Hanok has been proposed. The proposed method can evaluate torsional irregularity of Hanok easily only with characteristics of Hanok shapes, arrangement of lateral load resisting frames and their lateral stiffness without time consuming and complicate 3-dimensional structural analysis. The proposed formula is expressed as allowable maximum eccentricity, and torsional irregularity is evaluated by comparing this value with actual eccentricity. The applicability of the proposed scheme was evaluated by applying it to the line shape plan Hanok with two symmetrically arranged walls and the result was expressed by formula and graph. The results showed that the allowable maximum eccentricity is 10% of plan dimension perpendicular to the seismic load when the walls are placed at the extreme end. The proposed formula was expressed as a generalized formula so it can be applied generally to the various plan shape and wall arrangement of Hanok.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.172-177
• /
• 2004

This paper presents the results of the structural analysis and optimal design of frames of the UUV(Unmanned Underwater vehicle) to be operated at 6000m depth in the ocean. The structure of the UUV system can be classified into two structure, Launcher ana ROV. Frame of the launcher will be made by Galvanized Steel which has high strength and corrosion-resistant but this material has high specific gravity for tile object to be weight in the water Similarly, ROV will be made by AI6061-T6, and frame of the ROV will be fix many instruments and syntactic buoyancy materials. Before fabrication of tile frame, we performed sensitivity analysis - change in weight due to $\pm1\%$ change in design variables, for easy choice by change of dimension of the frame.

• 한국실내디자인학회논문집
• /
• 제20권6호
• /
• pp.79-87
• /
• 2011

Spatial perception and spatial structure that focus on psychological effects produce a real force through the medium of space that can control human actions, even their psychology. The job of understanding the characteristics and effects of architectural spaces that recognize the relationship between architecture and human beings, including the psychological dimension, is an alternative search for quality spaces that can increase the mutual relationship between space and human beings. This paper introduces two propositions called "space" and "psychology" in order to discover a meta-pattern connecting space and the human mind with the aim of systematizing that internal network and establishing a new architectural system concerning space and human beings. This paper also proposes a method of accessing physical spaces that can affect psychological states through a conceptual substitution called "extension," with the aim of discovering the implications inherent in such extensive relationships and proposing a methodology of organizing psychological spaces based on the characteristics of that extensive connection. The means of extensively connecting psychological spaces were classified into the three categories of memory system, sensory system, and motor system, and their corresponding extensive connection characteristics called "simultaneous relativity," "non-mediated immediacy," and "purification process" were also derived. These characteristics accelerate the changes in psychological intensity and function as principles that organize psychological space.

• 통합자연과학논문집
• /
• 제8권3호
• /
• pp.192-203
• /
• 2015

In view of the growing medicinal importance of pyrazole and its derivatives, the single crystal X-ray diffraction study was carried out for the potential active 2-Benzyl-3-[3-(4-bromo-phenyl)-1-phenyl-1H-pyrazol-4yl]-4,6-dioxo-5-phenyl-octahydro-pyrrolo[3,4-C]pyrrole-1-carboxylic acid ethyl ester ($C_{37}H_{31}BrN_4O_4$, H2O). In the title compound are two molecules exist in the asymmetric unit. It crystallizes in the monoclinic space group $P{\hat{i}}$ with unit cell dimension $a=13.361(18){\AA}$, $b=13.424(17){\AA}$ and $c=21.649(2){\AA}$ [${\alpha}=80.745(9)^{\circ}$, ${\beta}=79.770(10)^{\circ}$ and ${\gamma}=60.788(6)^{\circ}$]. The pyrazole ring adopts planar conformation. The sum of the bond angles at nitrogen atom of the pyrazole ring indicates the $Sp^2$ hybridized state. The crystal structure is stabilized by intramolecular C-H...O hydrogen bond interaction.