• Progress in Medical Physics
• /
• v.29 no.4
• /
• pp.123-136
• /
• 2018

The complex dose distribution and dose transfer characteristics of intensity-modulated radiotherapy increase the importance of precise beam data measurement and review in the acceptance inspection and preparation stages. In this study, we propose a process map for the introduction and installation of high-precision radiotherapy devices and present items and guidelines for risk management at the acceptance test procedure (ATP) and commissioning stages. Based on the ATP of the Varian and Elekta linear accelerators, the ATP items were checked step by step and compared with the quality assurance (QA) test items of the AAPM TG-142 described for the medical accelerator QA. Based on the commissioning procedure, dose quality control protocol, and mechanical quality control protocol presented at international conferences, step-by-step check items and commissioning guidelines were derived. The risk management items at each stage were (1) 21 ionization chamber performance test items and 9 electrometer, cable, and connector inspection items related to the dosimetry system; (2) 34 mechanical and dose-checking items during ATP, 22 multileaf collimator (MLC) items, and 36 imaging system items; and (3) 28 items in the measurement preparation stage and 32 items in the measurement stage after commissioning. Because the items presented in these guidelines are limited in terms of special treatment, items and practitioners can be modified to reflect the clinical needs of the institution. During the system installation, it is recommended that at least two clinically qualified medical physicists (CQMP) perform a double check in compliance with the two-person rule. We expect that this result will be useful as a radiation safety management tool that can prevent radiation accidents at each stage during the introduction of radiotherapy and the system installation process.

• Quantitative Bio-Science
• /
• v.37 no.2
• /
• pp.133-141
• /
• 2018

Graphical lasso is one of the most popular methods to estimate a sparse precision matrix, which is an inverse of a covariance matrix. The objective function of graphical lasso imposes an ${\ell}_1$-penalty on the (vectorized) precision matrix, where a tuning parameter controls the strength of the penalization. The selection of the tuning parameter is practically and theoretically important since the performance of the estimation depends on an appropriate choice of tuning parameter. While information criteria (e.g. AIC, BIC, or extended BIC) have been widely used, they require an asymptotically unbiased estimator to select optimal tuning parameter. Thus, the biasedness of the ${\ell}_1$-regularized estimate in the graphical lasso may lead to a suboptimal tuning. In this paper, we propose a two-staged bias-correction procedure for the graphical lasso, where the first stage runs the usual graphical lasso and the second stage reruns the procedure with an additional constraint that zero estimates at the first stage remain zero. Our simulation and real data example show that the proposed bias correction improved on both edge recovery and estimation error compared to the single-staged graphical lasso.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.1
• /
• pp.114-121
• /
• 2003

In this paper, low voltage and two stage CMOS Class E RF power amplifier for ISM(Industrial/Scientific/Medical) Open Band is presented. The power amplifier operates at 2.4GHz frequency, and is designed and simulated with a 0.35um CMOS technology and HSPICE simulator. The power amplifier is simple structure of two stage Class E power amplifier. The design procedure determing matching network was presented. The power amplifier is composed of input stage matching network, preamplifier, interstage matching network, power amplifier, and output stage matching network. The matching networks of input stage and interstage were constituted by pi($\pi$) type and L type respectively. At 2.4GHz operating frequency, and with a 2.5V supply voltage, the power amplifier delivers 23dBm output power to a 50${\Omega}$ load with 39% power added efficiency(PAE).

• Korean Institute of Interior Design Journal
• /
• v.20 no.2
• /
• pp.102-109
• /
• 2011

Under the rule of Japanese Imperialism, there were two kinds of architectural government organizations inside the Chosun(朝鮮) Governor-General which designed To(道) and Pu(府) government office buildings; one was the organization inside the central government office and the other inside the local government offices(To and Pu). By the administrative approval procedure of the Chosun Governor-General, the local architectural organization planned site and floors of the building in the schematic design stage, and in the detail design stage not only the central but sometimes the local planned the building design. The design accomplished by the local in schematic stage was believed as a kind of guideline in detail design and the local organization was able to insist their own needs to the central and to change the central's planning. Even though the central had the authority of the design, the local took part in the planning of To and Pu government office buildings at least in the schematic design stage.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.428-431
• /
• 2004

A multi-stage hierarchical clustering technique, which is an unsupervised technique, has been proposed in this paper for classifying the hyperspectral data .. The multistage algorithm consists of two stages. The 'local' segmentor of the first stage performs region-growing segmentation by employing the hierarchical clustering procedure with the restriction that pixels in a cluster must be spatially contiguous. The 'global' segmentor of the second stage, which has not spatial constraints for merging, clusters the segments resulting from the previous stage, using a context-free similarity measure. This study applied the multistage hierarchical clustering method to the data generated by band reduction, band selection and data compression. The classification results were compared with them using full bands.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.188-190
• /
• 2006

A multistage hierarchical clustering technique, which is an unsupervised technique, was suggested in this paper for classifying large remotely-sensed imagery. The multistage algorithm consists of two stages. The local segmentor of the first stage performs regiongrowing segmentation by employing the hierarchical clustering procedure of CN-chain with the restriction that pixels in a cluster must be spatially contiguous. This stage uses a sliding window strategy with boundary blocking to alleviate a computational problem in computer memory for an enormous data. The global segmentor of the second stage has not spatial constraints for merging to classify the segments resulting from the previous stage. The experimental results show that the new approach proposed in this study efficiently performs the segmentation for the images of very large size and an extensive number of bands

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.10a
• /
• pp.111-118
• /
• 1995

A method of determining an optimum blank shape for the non circular deep drawing process is more investigated and applied to the balnk design for multi-stage deep drawn product. The forming procedure of two-stage deep drawing process is looked over and the method of determining a blank shape is proposed. In experimental research, a optimum blank and a optional rectangular blank were considered and we measured thickness strain distributions. We could predict a strain distribution and compare with a experimental strain distribution. Also, the strain distributions for the blank shapes, optimum and rectangular, were compared.

• Communications for Statistical Applications and Methods
• /
• v.15 no.3
• /
• pp.387-402
• /
• 2008

In this thesis we propose a two-stage periodic inspection model for maintaining the reliability of a system in long-term storage. There are two types of tests available; a fallible test and an error-free test. The system is overhauled at detection of failure or when the storage reliability after inspection becomes less than or equal to the prespecified value. The expected cost per unit time until overhaul is derived and a procedure for minimizing the expected cost is suggested. The two-stage periodic inspection model is compared with the one-stage periodic inspection model for various parameters of the cost function when the failure time follows exponential and Weibull distributions. The proposed model is then applied to an existing missile system for comparison with the current inspection policy.

• Journal of Chest Surgery
• /
• v.25 no.4
• /
• pp.398-405
• /
• 1992

Twenty nine adult patients underwent surgical esohpagectomy and one, bypass procedure for documented carcinoma of esophagus and cadiac portion of stomach at Chonnam National University Hospital from Jan 1986 to April 1991. There were several kinds of esophagectomies including through transhiatal, left thoracotomy only, laparotomy and thoracotomy, and laparotomy and right thoracotomy and cervical incision. Twenty five and squamous cell carcinoma and 5, adenocarcinoma. The tumor locations were the upper third in 3, middle third in 12, lower third in 10 and cardiac portion of stomach in 5. After operation, 8[27%] patients were classified in Stage IIa, 6[20%] patients in Stage IIb, 15 patients[50%] in Stage III and one patient in Stage IV. Major postoperative complications included anastomotic narrowing in 3, limited suture line leak in 2, wound infection in 2, hoarseness in 2, pseudomembraneous enterocolitis in 1 and herpes zoster in 1. There was no death within 30 days of operation. Ten months survival was 100% for patients with Stage lIa, 67% for patients with Stage IIb, 50% for patients with Stage III. Furthermore, 20 months survival was 75% in IIIa, 33% in IIb, and 40% in III. But there were no significant differences in survivals among the stage. The actuarial survival is 58% at one year and 41% at two years, The periods of average survival is 589 days after operation.

• Communications for Statistical Applications and Methods
• /
• v.17 no.1
• /
• pp.79-88
• /
• 2010

Introductory statistic class proposes two tests for the equality of two population means according to the homogeneity of their variances. However, in practice, the variances are also unknown and practitioners often test their homogeneity before they do two sample t-test. This is also true in many popular statistical packages such as SAS and SPSS. In this paper, we study the type I error of this two stage procedure and propose a procedure to control it at a given significance level.