• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제21권3호
• /
• pp.223-238
• /
• 2015

램프 미터링은 램프로부터 도로에 진입하는 차량을 통제 함으로써 교통 상황을 향상 시키는 직접적이고 효과적인 방법이다. 본 논문에서는 밀도 데이터를 이용한 새로운 램프 미터링 방법을 제안한다. 교통량을 사용하는 기존 방법은 낮은 신뢰도의 데이터에 의해 동작 되며 다양한 문제를 가질 수 있다. 또한 주 도로에 정체가 발생 했을 때 램프의 추가적인 교통 정체 및 램프의 용량초과 문제가 발생 할 수 있다. 기존 방법에 대한 문제를 해결 하기 위해 제안하는 방법은 밀도와 가속도 데이터를 이용한 새로운 램프 미터링 방법을 제안한다. 실험을 위해 미네소타 주 트윈시티의 TH-62의 고속 국도를 선택하였고 효율성을 테스트 하기 위해 미네소타 주에서 동작하고 있는 Stratified Zone Metering(SZM)과 비교 실험을 진행한다. 실험 환경은 PTV사의 VISSIM 시뮬레이터를 이용하였고 이를 제어할 수 있는 도로 제어 및 평가 시스템(TICAS)을 개발 하여 시뮬레이션을 진행 하였다. 실험 조건은 정체가 가장 심한 2011년 10월 25일 오후 2시부터 오후 7시까지로 설정한다. 실험 결과 도로의 총 여행시간과 정체구간은 SZM보다 20% 감소 하였다. 또한 각 램프의 대기 열 길이를 측정한 결과 SZM에서 발생하던 램프의 길이를 초과하는 문제점이 해결된 것을 확인할 수 있었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.613-622
• /
• 2000

Watering operation for oyster mushroom growing houses is regarded as drudgery and time consuming farm operation for growers. Most of mushroom growing beds in oyster mushroom growing houses are designed as two-row with four floor beds, therefore the watering and ventilation between the bed floors are much difficult for farmers because of its structural design. The study aimed to reduce the watering operation and improve the mushroom growing environment through the humidification and air supply on mushroom growing beds. Results showed that appropriate size of nozzle is between 0.8~0.5ml/s for the humidification and higher than the 2.0ml/s for the watering. The optimum water supply pressure was regarded as between 1.0~2.0MPa and the uniform distribution of droplet on the bed showed on air flow speed of 14m/s. The prototype was equipped with twin nozzle with. the humidification nozzle of 0.85ml/s and watering nozzle of 5.0ml/s, and the air blast fan with the air speed of 10m/sec in each air spout. In the field test in a practical scale mushroom growing house, it was well operated dependant on the set desire by a electric control unit. The machine can be practically used as air blast watering and air blast humidification for oyster mushroom growing farms without manual.

• 한국식품과학회지
• /
• 제52권4호
• /
• pp.357-362
• /
• 2020

본 연구는 조직감 및 기능성 면에서 우수한 식물성 대체육의 제조를 위하여 부원료로 버섯을 첨가한 압출성형 대체육의 품질특성에 대하여 살펴보았다. 대체육의 원료는 분리대두단백 50%, 글루텐 40%, 옥수수 전분 10%를 섞은 것을 기본배합(base)으로 하였다. 버섯 첨가함량을 기본배합 대비 0, 4, 8, 12%로 한 총 네개의 시료를 수분함량 55%, 스크루 속도 150 rpm, 바렐 온도를 170℃로 하여 냉각 사출구를 통해 20℃로 사출하였다. 압출성형 후 물리적 특성으로 경도, 탄성, 응집성, 씹힘성과 절단 강도, 조직잔사지수, 보수력을 측정하였고, 화학적 특성으로 수용성 질소지수, 단백질 소화율과 DPPH 라디칼 소거활성을 측정하였다. 버섯 첨가함량이 증가함에 따라 경도, 탄성, 응집성, 씹힘성과 절단강도가 모두 증가하였으며, 조직잔사지수 역시 증가하였다. 반면에, 버섯 첨가함량이 증가할수록 보수력과 수용성 질소지수는 감소하였으며, 단백질 소화율도 다소 감소하였다. DPPH 라디칼 소거활성은 버섯 첨가함량의 증가에 따라 유의적인 증가를 나타내었다. 압출성형 대체육에 버섯의 첨가는 대체육의 조직감을 개선하고 항산화 기능성을 부여하는 유효한 공정임을 확인하였다.

• Ocean Systems Engineering
• /
• 제10권1호
• /
• pp.87-110
• /
• 2020

Catamaran has recently been a choice to support a typical vertical axis turbine in floating tidal current energy conversion system. However, motion responses associated with the catamaran can reduce the turbines efficiency. The possibility to overcome this problem isto change the catamaran parameter by varying and simulating the demi-hull separations to have lower motion responses. This simulation was undertaken by Computational Fluid Dynamic (CFD) using potential flow analysis. Cases of demi-hull separation were considered, with ratios of demi-hull separation (S) to the breadth of demi-hull (B), ^S/_B of 3.45, 4.95, 6.45, 7.2 and 7.95. In order to compare to the previous works in the literature, the regular wave was set with wave height of 0.8 m. Furthermore, the analysis was carried out by irregular waves with significant wave height, H_s, of about 0.09 to 1.5 m and the wave period, T, of about 1.5 to 6 s or corresponding to the wave frequency, ω, of about 1.1 to 4.2 rad/s. The wave spectrum was derived from the equation of the International Towing Tank Conference (ITTC). For the case of turbines-loaded catamaran under consideration, the new finding is that the least significant amplitude response can be satisfied at the ratio ^S/_B of 7.2. This study indicates that selecting a right choice of demi-hull separation ratio could contribute in reducing motion responses of the tidal current turbines-loaded catamaran.

• 융합정보논문지
• /
• 제8권6호
• /
• pp.165-171
• /
• 2018

최근 IT보안의 화두가 되고 있는 가장 위협적인 공격은 APT공격이다. APT공격에 대한 대응은 인공지능기법을 활용한 대응이외에는 방법이 없다는 것이 현재까지의 결론이다. 여기서는 머신러닝 기법을 활용한 사이버위협 데이터를 분석하는 방법, 그 중에서도 빅데이터 머신러닝 프레임웍인 Scikit Learn를 활용하여 사이버공격 사례를 수집한 데이터셋을 이용하여 사이버공격을 분석하는 머신러닝 알고리즘을 구현하였다. 이 결과 70%에 육박하는 공격 분류 정확도를 보였다. 이 결과는 향후 보안관제 시스템의 알고리즘으로 발전가능하다.

• Steel and Composite Structures
• /
• 제31권1호
• /
• pp.13-25
• /
• 2019

Reactive powder concrete (RPC) is a type of ultra-high strength concrete that has a relatively high brittleness. However, its ductility can be improved by confinement, and the use of RPC in composite RPC filled steel tube columns has become an important subject of research in recent years. This paper aims to present an experimental study of axial capacity calculation of RPC filled circular steel tube columns. Twenty short columns under axial compression were tested and information on their failure patterns, deformation performance, confinement mechanism and load capacity were presented. The effects of load conditions, diameter-thickness ratio and compressive strength of RPC on the axial behavior were further discussed. The experimental results show that: (1) specimens display drum-shaped failure or shear failure respectively with different confinement coefficients, and the load capacity of most specimens increases after the peak load; (2) the steel tube only provides lateral confinement in the elastic-plastic stage for fully loaded specimens, while the confinement effect from steel tube initials at the set of loading for partially loaded specimens; (3) confinement increases the load capacity of specimens by 3% to 38%, and this increase is more pronounced as the confinement coefficient becomes larger; (4) the residual capacity-to-ultimate capacity ratio is larger than 0.75 for test specimens, thus identifying the composite columns have good ductility. The working mechanism and force model of the composite columns were analyzed, and based on the twin-shear unified strength theory, calculation methods of axial capacity for columns with two load conditions were established.

• 대한조선학회논문집
• /
• 제58권6호
• /
• pp.391-399
• /
• 2021

In order to investigate force and cavitation characteristics for the flat & twisted rudders in the Large Cavitation Tunnel (LCT), the rudder dynamometer was designed and manufactured. The measuring capacities of lift, drag and moment are ±1000 N, ±2000 N, and ±150 N-m, respectively. The present dynamometer uses the actuator with a harmonic drive to control the rudder angle without backlash. As the target ship is a military ship with twin shaft, each dynamometer was installed above the port & starboard rudders. After the installation of the model ship with all appendages, the model test composed of rudder force measurement and cavitation observation was conducted for the existing flat rudder & the designed twisted rudder. While the flat rudder showed the big difference of lift & moment between port & starboard, the twisted rudder presented a similar trend. The cavitation of the twisted rudder showed better characteristics than that of the flat rudder. Another set of model tests were conducted to investigate rudder performance by the change of the design propeller. There was little difference in rudder performance for the design propellers with slight geometric change. Through the model test, the characteristics of the flat & twisted rudders were grasped. On the basis of the present study, it is thought that the rudder with better performance would be developed.

• 한국컴퓨터정보학회논문지
• /
• 제27권5호
• /
• pp.93-100
• /
• 2022

우리나라의 제사 문화는 코로나(COVID-19)로 왕래 및 접촉이 제한적이다. 또한, 우리나라의 제사 문화는 직접 만나 고인을 추모한다. 본 논문에서는 메타버스(Metaverse) 기술을 적용해 사이버 세상(가상현실)에서 고인을 추모하고 제사 의식할 수 있는 비대면 메타버스 추모관 플랫폼 서비스를 제안한다. 연구에서는 제안하는 서비스는 고인의 일대기를 전시하는 회상관, 고인에 제사를 지내는 제사관, 고인의 유품과 유언장을 확인하는 고인 관을 구성했다. 또한, 가상현실장치(HMD:Head Mounted Display)는 어지러움을 최소화하기 위해 Teleportation, 콘텐츠 해상도를 4K로 했다. 특히, 제사관은 상호작용(interaction) 기술을 적용해 가족 간에 제사하는 실감형 서비스를 제공하도록 했다. 연구된 추모관 메타버스 서비스는 누구나 대면 형태가 아닌 비대면 상태에서 가족 단위로 고인을 추모하는 메타버스 기반의 플랫폼 서비스이다.

• 복식
• /
• 제55권2호
• /
• pp.1-17
• /
• 2005

The realistic plan to establish a silver market in the clothing industries has not taken concrete shape, although the interest in the establishment of a silver market targeting the aged as a new custom group Is gradually Increasing because the rapid development of science and medical technology in the 20th century has led to an extension of lift and improvement of living conditions. The specialized business which produces and sells the clothing for the elderly is of small number and most of the clothes for the elderly are manufactured and sold by the companies for women's clothing in which change the size or length of the original works rather than reflect the bodily features of the elderly. The findings indicated that domestic brands showed the coordinated concept of a suit of jacket and slacks or skirts while the clothes were formed with a variety of coordinations centering around single article in the U.S brands. But, there was no difference in the use of natural materials centering around cotton and silk etc. and in the use of embroidery, lace and decorative details between the two countries. The knit brands of knit suit style in Korea were formed with the items focused on pull over and cardigan twin set, while the U.S brands were mainly formed with the design of knit suit style. The domestic knit brands were mostly developed with complicated patterns and gorgeous colors, while most of the U.S. brands were presenting a single or two tone color suit style and evening one-piece dress with a simple and modern style. The sporty casual brands of sporty casual style in Korea had a variety of colors and patterns focused on function and comfort for diverse leisure activities and daily life, while the U.S brands were established to present a variety of styles with the items of single article because they had a separate brand for casual even though it was not a exclusive brand for the elderly This study has a meaning in the presentation of the design idea considering the bodily shape of the elderly compared to the ready-to-wear considering the size alone, by examining the characteristics of bodice according to the physical change of the elderly women, analyzing the design of madam brand and the style of the ready-to-wear, researching the general circumstances of the brand for the elderly women, and highlighting the necessity of the elderly clothing market.

• 대한의용생체공학회:의공학회지
• /
• 제28권3호
• /
• pp.387-391
• /
• 2007

An oxygenator is a very important artificial organ and widely used for patients with lung failure or during open heart surgery. Although an oxygenator has been widely studied worldwide to enhance its efficiency, studies on oxygenators, in particular when using a pulsatile blood flow, are domestically limited. Therefore, a new oxygenator was developed in the lab and animal experimental results are described in the paper. The oxygenator is composed of polycarbonate housing and polypropylene hollow fibers. It has a total length of 400 mm and a surface area of $1.7 m^2$. The animal experiment lasted for 4 hours. The blood flow rate was set to 2 L/min and a pulsatile blood pump, T-PLS (Twin-Pulse Life Support), was used. Samples were drawn at the oxygenator's inlet and outlet. The total hemoglobin (Hb), saturation oxygen ($sO_2$), and partial oxygen pressure ($pO_2$), partial $CO_2$ pressure ($pCO_2$), and plasma bicarbonate ion concentration ($HCO_3^-$) were measured. The oxygen and carbon dioxide transfer rates were also calculated based on the experimental data in order to estimate the oxygenator's gas transfer efficiency. The oxygen and carbon dioxide transfer rates were $16.4{\pm}1.58$ and $165.7{\pm}10.96 mL/min$, respectively. The results showed a higher carbon dioxide transfer rate was achieved with the oxygenator. Also, the mean inlet and outlet blood pressures were 162.79 and 137.92 mmHg, respectively. The oxygenator has a low pressure drop between its inlet and outlet. The aim of own preliminary study was to make a new oxygenator and review its performance when applying a pulsatile blood pump thus, confirming the possibility of a new oxygenator suitable for pulsatile flow.