• 열처리공학회지
• /
• 제11권1호
• /
• pp.27-34
• /
• 1998

Effects of different heat treatments on microstructure and damping capacity of Cu-55%Mn alloy were investigated to find an optimum heat treatment condition for a maximum damping capacity. The alloy showed the high level of damping capacity in case of the aging at 375 and $400^{\circ}C$. This is ascribed to the FCC${\rightarrow}$FCT martensitic transformation and microstructural changes from mottled to tweed band type. The damping capacity had a maximum value of 0.33 in logarithmic decrement when the alloy was aged at $375^{\circ}C$ for 14 hours followed by 20 times of thermal cycling between room temperature and $250^{\circ}C$. The refinement of tweed structure by thermal cycling is thought to be responsible for the highest damping capacity.

• 한국광물학회지
• /
• 제16권1호
• /
• pp.91-106
• /
• 2003

Na-장석(Amelia albite)의 등온가열 실험에 대한 XRD 분석 결과는 $1073^{\circ}C$의 가열 시료에서 격자상수의 급격한 변화를 보여주는데, 이는 Al과 Si의 비배열(disordering)과 가열된 시료의 급랭에 의한 격자 변형 때문이라고 본다. $1073^{\circ}C$에서는 약 7일 간의 가열에 의해 저온 알바이트에서 고온 알바이트로 상전이한 반면, $924^{\circ}C$에서는 Al-Si의 비배열 속도가 느려서 140일 동안 가열된 시료도 초기 단계의 중간단계 알바이트 상태로 남아 있었다. TEM 분석 결과는 가열된 시료에서 100∼200$\AA$ 크기의 트위드(tweed) 구조가 형성됨이 특징적인데, 이 구조의 발달 및 변화는 고온($1073^{\circ}C$)과 저온 ($923^{\circ}C$)의 가열 시료가 다름이 드러났다. 즉, 전자는 국부적으로 알바이트 쌍정과 유사한 미세구조로 전이한데 반해, 후자는 보다 넓은 지역에 걸쳐 알바이트 쌍정면이 우세한 도메인 구조로 전이하였다. 가열에 의한 Al과 Si의 비배열과 급랭에 의한 응력 때문에 격자의 불안정(lattice instability)이 증가하게 되는데 이를 완화시키기 위하여 태아 단계의 쌍정 구조(알바이트 쌍정과 pericline 쌍정)를 형성되는 것이 트위드 구조의 원인이라고 본다.

• 한국의류학회지
• /
• 제31권1호
• /
• pp.1-10
• /
• 2007

This research was designed to compare the subjective evaluation of Hand between on- and off-line by structure and sensible characteristics of fabric. 113 subjects who have a fashion design major evaluated the subjective evaluation of Hand of various 16 kinds of specimens on- and off-line. T-test and pearson correlation coefficient were used for statistical analysis by SPSS WIN 11.0. The results of this study were as follows: The results of correlation analysis of the evaluation score indicated that Crash and Satin show high correlation between two kinds of evaluation score. But, fabrics which have distinct characteristics such as Plush, Dobby, Seersucker represented low correlation coefficient. The results of t-test fer the difference of the evaluation score showed that thin fabrics like Organdy represent a large difference between on- and off-line evaluation. On the other hand, twill weaved fabrics like Drill, Tweed, Saxony did not show many differences. Analysing each item in terms of correlation of evaluation of hand between on- and off-line gave results that the shininess was most deliverable through on-line and density and the dryness was not so deliverable through on-line. Comparison of evaluation score between on- and off-line items showed that the estimation to real fabric is more negative than that of on-line. The results of most preferable hand between on-and off-line showed exact opposite preference between shinny, smooth and soft Satin and rough, woolen Tweed. Organdy showed the most different subjective evaluation of hand in real ones compared with that of on-line.

• 한국의상디자인학회지
• /
• 제3권1호
• /
• pp.15-31
• /
• 2001

Textile fabrication affected by consumer and selected by fashion designer. The textile fabrication has been made not only by introducing the newly developed fiber but also by modifying the existing textile materials to impart sensibility to them. Consumers choose but to their sensibility of textile material and fashion trend. On purpose in this research is find out have influence on textile image. Wool fabrics have been in use from early age in northern Europe. Recognition of the role of the morphological structure, surface properties, chemical composition, acid-base characteristics in the chemical treatment of wool led to quantum advances in the fields of setting, shrink-resisting, chemical modification, and internal fiber cross-linking. Mechanical finishing to develop the handle, drape, and surface characteristics of the fabric is at least as important as chemical or wet finishing. Result showed that to have variety sensibility and trend theme in wool fabrics are tweed, venetian, serge, gabardine and melton.

• 대한치과기공학회지
• /
• 제34권4호
• /
• pp.345-352
• /
• 2012

Purpose: The age-hardening mechanism of an Au-Ag-Cu-Pt-Zn alloy for crown and bridge fabrication was investigated by means of hardness test, X-ray diffraction study and field emission scanning electron microscopic observation. Methods: Before hardness testing, the specimens were solution treated and then were rapidly quenched into ice brine, and were subsequently aged isothermally at $400-450^{\circ}C$ for various periods of time in a molten salt bath and then quenched into ice brain. Hardness measurements were made using a Vickers microhardness tester. The specimens were examined at 15 kV using a field emission scanning electron microscope. Results: By the isothermal aging of the solution-treated specimen at $450^{\circ}C$, the hardness increased rapidly in the early stage of aging process and reached a maximum hardness value. After that, the hardness decreased slowly with prolonged aging. However, the relatively high hardness value was obtained even with 20,000 min aging. By aging the solution-treated specimen, the f.c.c. Au-Ag-rich ${\alpha}_0$ phase was transformed into the Au-Ag-rich ${\alpha}_1$ phase and the AuCu I ordered phase. Conclusion: The hardness increase in the early stage of aging process was attributed to the formation of lattice strains by the precipitation of the Cu-rich phase and then subsequent ordering into the AuCu I-type phase. The decrease in hardness in the later stage of aging process was due to the release of coherency strains by the coarsening of tweed structure in the grain interior and by the growth and coarsening of the lamellar structure in the grain boundary. The increase of inter-lamellar space contributed slightly to the softening compared to the growth of lamellar structure toward the grain interior.

• 한국의상디자인학회지
• /
• 제18권3호
• /
• pp.245-260
• /
• 2016

This study explored cases of 3D printing utilization in domestic and overseas fashion industries, and presented utilization strategies for fashion design departments in universities in future by grasping characteristics of newly appearing distribution types through 3D printing. Cases of producing costumes using 3D printing in fashion industry comprised a bikini using the material of Nylon12 that continuum fashion demonstrated, innovative 3D costumes by Iris Van Herpen, Tweed Suit using the material that Chanel manufactured with 3D printing technology, but they were limited to experimental fashion works due to limitations of 3D printer material and printing size. On the other hand, in fashion accessories, with jewelry and shoes at the head of the list, MCM and Kipling also demonstrated bags using this technology, and Elvis Pompilio and Gabriela Ligenza demonstrated 3D printing hat products as well. Except the above, as in glasses and neckties utilizing 3D printing, owing to reduced limitations of time, size and material, 3D printing was found to be utilized in fashion accessories other than costumes. Recently there has been a new consumption and distribution structure coming up focusing on 3D printing technology. That is, in overseas countries, content platforms sharing products modeled by oneself has rapidly appeared, and in our country as well, funnypoly, a 3D content platform appeared in 2015. The appearance of these new types of distribution structures means that the common people can produce design contents, and we believe that it may bring about a change in the traditional way of distribution structure. To walk in step with this change, it is believed that it is necessary for fashion design departments to raise college faculty members who can educate 3D printing, develop curriculum to educate 3D printing, and develop experiential programs connected with middle and high schools.

• 복식문화연구
• /
• 제18권5호
• /
• pp.789-808
• /
• 2010

The orientalism in fashion is believed to develop from the eclectic notion of oriental and occidental fashion. By studying on Gabrielle Chanel's clothing that is usually used by neutral colors and on Yohji Yamamoto's clothing that characterizes clothes in neutral colors, the purpose of this study is to seek ways for remaking Korean traditional clothing into a new modern one to gain a world reputation in terms of clothes. Therefore the study is for exploring the characteristics on the factors of fashion design such as color, line and textile materials with works of Gabrielle Chanel, a famous designer in Western world who has made a black color a popular one for people and works of Yohji Yamamoto, an well-known fashion designer of the East using neutral colors. This study analyzed, from the 2004 S/S to the 2006 F/W, the collection of works published in style.com through the works of Gabrielle Chanel, Yohji Yamamoto, and through the analysis of the visual target. A total of 527 images are used in this paper. Elements of fashion design analysis are lines, colors, and materials. The study reached the conclusion as follows after analyzing the characteristics on clothing with neutral colors of Gabrielle Chanel and Yohji Yamamoto. In case of aesthetic characteristics on the design of Gabrielle Channel, it has expression of feminist, sensual, modern and luxury. It is considered that Gabrielle Channel has a luxury image using a neutral color. Also using simple sleeveless in black and tweed structure, the garments have mixed with neutral colors. Fashion design characteristics on the design of Yohji Yamamoto classified into sensual, modern, ascetic expression. Therefore the design has a simple expression of using a black color. Yohji Yamamoto is a designer who pursues unstructured design by using various neutral colors such as black, gray and white based on the oriental sentiment.