• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.5
• /
• pp.848-872
• /
• 2015

Hydrodynamic derivatives or coefficients are required to predict the maneuvering characteristics of a marine vehicle. These derivatives are obtained numerically for a DTMB 5512 model ship by virtual simulating of captive model tests in a CFD environment. The computed coefficients are applied to predict the turning circle and zig-zag maneuvers of the model ship. The comparison of the simulated results with the available experimental data shows a very good agreement among them. The simulations show that the CFD is precise and affordable tool at the preliminary design stage to obtain maneuverability performance of a marine vehicles.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.469-473
• /
• 2005

Capacities of a tandom-type air-conditioner may be modulated by turning on/off multiple compressors and adjusting positions of a electronic expansion valve. In this study. control algorithms for compressors and a electronic expansion valve were developed by using fuzzy’ logics. There algorithms were implemented in a test lab and proved to be effective for the control of indoor air temperature and superheat temperature.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.278-283
• /
• 2009

The bimodal tram with a pivoting joint has difficulty in making a sharp turn because of their long body and wheel base. Therefore, applying AWS(all wheel steering) to the bimodal tram is effective to reduce the turning radius. In the present study, HILS(hardware in the loop simulation) system for the AWS ECU test was developed, which consists of the components used in real vehicles. The data obtained from the HILS system also satisfied the dynamics simulation without any error on the operation control.

• Journal of Power System Engineering
• /
• v.14 no.6
• /
• pp.47-53
• /
• 2010

A stabilizer link connects the stabilizer bar to the lower arm of the suspension. When a vehicle is turning, lateral forces from the tire are transmitted through the stabilizer link into the stabilizer bar. The stabilizer bar will twist, thus adding rigidity to the vehicle body. In this study, the stabilizer link body was manufactured by using composite material with POM-GF25%. Therefore, the strength evaluation of stability link body with composite material carried out from tensile, wear and fatigue test. The tensile strength between the stability link body with composite material and the rod with knurling was the largest of four types of rod. In Analyzing materials property using optical sensing technique of stabilizer link for automobile parts, its has been identified the safety.

• Journal of the Korean Home Economics Association
• /
• v.31 no.4
• /
• pp.67-81
• /
• 1993

The purpose of this study was to measure married women's coping behaviors according to support stress. The data of this study were obtained from 545 married women who were daughter and daughter-in-law. For analysis of data, Factor Analysis, GLM, t-test, Regression, Pearson's Correlation. The results are as follows: 1. Coping behaviors were composed seven factors that are Mental Disengagement, Venting of Emotions, Restraint, Seeking Support, Acceptance, Active Coping, Turning to Religion. 2. Among the sociodemographic variables, relation, age of mother(p＜0.01), income, grown place of supporter, living arrangement(p＜0.05) were variables to have influence on the coping behaviors to support stress. 3. There was high correlation between support stress and the coping behaviors. (γ=.4339) 4. There was significant different between the higher group and the lower group of support stress on the coping behaviors.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.1
• /
• pp.70-74
• /
• 2001

In this paper, we studied the maneuvering performances of a ship with flapped rudder. PMM tests were carried out for a ship model with horn type rudder or flapped rudder. The Abkowitz's model was used as a basic mathematical model to simulate the maneuvering motions. The maneuvering motions of a ship with flapped rudder were compared with those of a ship with horn-type rudder. As a result, it was found that the turning ability of a ship with flapped rudder was remarkably improved.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2352-2356
• /
• 2008

Heat transfer and performance characteristics have been investigated for a rectangular wavy duct with dimple or protrusion arrays. The test duct was 15mm in height and 105mm wide. The print diameter of the dimple/protrusion wall was 12.99mm and the depth/height of the dimple/protrusion was 3.75mm. Local heat transfer coefficients on the dimple/protrusion wall were measured using a transient TLC technique. The Reynolds number was varied from 3,000 to 10,000. For the wavy duct tested in this study, adverse static pressure characteristics occurred at turning region of the wavy duct due to secondary flows. For the wavy duct with protrusion array, higher heat transfer enhancement level of 7.4 times than smooth straight case in maximum was obtained at low Reynolds number due to the high heat transfer enhancement by vortex flows. Also, the protrusion array increased the performance level of 3.0 at low Reynolds number of 3,000.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.675-680
• /
• 2006

Capacities of a tandem-type air-conditioner may be modulated by turning on and off of multiple compressors, and adjusting the position of a electronic expansion valve. In this study, control algorithms for compressors and a electronic expansion valve were developed by using fuzzy logics. The pressure control algorithm was also developed for the safe operation of compressors. There algorithms were implemented in a test lab and proved to be effective for the control of indoor air temperature and superheat temperature,

• Journal of Drive and Control
• /
• v.16 no.2
• /
• pp.36-42
• /
• 2019

The ESP (Electronic Stability Program) is an active control system that controls the posture of the vehicle by sensing the unstable state of the vehicle during braking, driving, or turning. The system works if the vehicle becomes unstable and it is very dangerous to develop it in the actual vehicle. For this reason, many studies have been carried out on the method of developing with simulation such as SIL / EIL. Some advanced companies have already applied it to the product development process. In this study, ESP hydraulic system and braking device model were constructed using SimulationX to build ESP SIL / EIL model. The hydraulic system model was constructed using the actual design parameters and the performance of the hydraulic model was verified by comparing with the actual vehicle test.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.9-15
• /
• 2018

The Ministry of National Defense announced 'Defense Reform 2.0' that aims to strengthen the country's security for decrease of regional uncertainties, growing requirements for advanced technologies, and a need for more efficiency in the Republic of Korea(RoK) Armed Forces this year. It said RoK Armed Forces have to change efficiently in preparation for rapid decline in military service resources as demographic cliff turning into reality, and the rapid evolution of the "battlefield environment" caused by developments in military science and technologies. RoK Navy combat Management System(CMS) made by domestic proprietary technology since 2000s and development centered on Agency for Defense Development require design changes for added requirements. So in this paper, I propose method of design a low cost and high efficiency navy CMS architecture based on high performance server and virtualization technology. And I create a test environment for analysis performance and compare the performance of proposed navy CMS and existing navy CMS.