• 대한안전경영과학회지
• /
• 제25권3호
• /
• pp.1-7
• /
• 2023

As the capacity of renewable power generation facilities rapidly increases, the variability of electric power system and gas turbine power generation is also increasing. Therefore, problems may occur that require urgent repair while the gas turbine rotor is stopped. When the gas turbine rotor turning is stopped and then restarted, if the turning period is not appropriate, severe vibration may occur due to rotor bending. As a result of the experiment, it was confirmed that normal operation is possible when the gap data measured at the start of rotor turning after maintenance work is similar to the existing value. And the vibration value at the start of rotor turning was lower as the rotor temperature was lower or the stop period was shorter.

• 한국기계가공학회지
• /
• 제7권2호
• /
• pp.23-30
• /
• 2008

As a basic machining process, turning is a widely used machining process in which a single-point cutting tool removes material from the surface of a rotating material. A common method of evaluating machining performance is to measure the surface roughness. In a turning operation, it is important to select cutting conditions for achieving high cutting performance. As a rule, cutting conditions can be classified into feed rate, depth of cut and insert radius. While cutting process even though cutting conditions are optimized, the average roughness can be deterioration due to wear of the cutting tool edge. In this study, the aim is to maintain the average roughness even though the cutting condition is irregularly changing within the predictable range due to the working environment. First, the surface roughness model influenced by cutting conditions is constructed based on the experimental results in a turning operation, Second, applying the sliding mode control theory to the turning operation model which is composed of the surface roughness model and the motor transfer function, the surface roughness is closed to the desired value. Finally, the effectiveness of this approach is demonstrated through the computer simulation.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.295-300
• /
• 2010

Inconel 718 alloy, widely used as material of aircraft engine, has a good mechanical property in high temperature, strong anti-oxidation characteristics in oxidated current over $900^{\circ}C$, and also is not easily digested in the air containing sulfur, therefore, its usage as mechanical component is expanding rapidly. Even though Inconel alloy 718 is difficult to machine, it requires highly precise processing/machining to sustain its component quality of high accuracy. In this paper, general turning operation conditions arc tested to select the best cutting process condition by measuring surface roughness through implementing experiments with orthogonal array of cutting speed, feeding speed and cutting depth as processing parameters based on the Taguchi method. Optimal turning operation conditions are extracted from the proposed experimental models.

• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.48-53
• /
• 2009

Inconel 718 alloy, widely used as material of aircraft engine, has a good mechanical property in high temperature, strong anti-oxidation characteristics in oxidated current over $900^{\circ}C$, and also is not easily digested in the air containing sulfur, therefore, its usage as mechanical component is expanding rapidly. Even though Inconel alloy 718 is difficult to machine, it requires highly precise processing/machining to sustain its component quality of high accuracy. In this paper, general turning operation conditions are tested to select the best cutting process condition by measuring surface roughness through implementing experiments with orthogonal array of cutting speed, feeding speed and cutting depth as processing parameters based on the Taguchi method. Optimal turning operation conditions are extracted from the proposed experimental models.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.69-77
• /
• 1993

본 연구에서는 Koren과 Masory가 개발하여 적분제어기에 적용한 제어알고리즘 을, 제어기 반응속도를 향상시키기 위하여 비례적분제어기에 적용하는 방법을 제시하 고자 한다. 실험을 통하여 제어시스템을 모델링하고, 근궤적법을 이용하여 시스템을 안정하게 유지하기 위한 개회로 이득을 선정하며, 기존의 보통선반을 적응제어시스템 으로 개발하여 고정이득 비례적분제어기와 가변이득 비례적분제어기의 성능을 실험을 통하여 비교하고자 한다.

• 한국농공학회지
• /
• 제18권2호
• /
• pp.4096-4104
• /
• 1976

This experiment was carried out to investigate the efficient turning method which will be able to use every cutting methods, to calculate the width of the center field which must transpose from rotary cutting method to return cutting method, to investigate the effects of L/W and unit field on the operation efficiency. The results are summarized as follows: 1. In case of cutting in the outer field, the efficient turning method is the "$\alpha$" type turning method (half U-shaped turning method) at the first rotation, is the "$\beta$" type turning method (T-shaped turning method) at the second to fourth rotation. 2. In case of cutting in the inner field, the efficient turning method which takes the least turning time is the "a" type turning method ($\Delta$-shaped turning method). 3. The width of the center field (W') changes by the length-width ratio (L/W) and width (W), W' is 9.0m in case that L/W is 2.5 and W is 30m. 4. The larger L/W and area of unit field (A) become, the more operation efficiency (E) increases, and the limits that E is affected signicantly by L/W is 2 to 3.5 and A is within 5,000$m^2$. within 5,000$m^2$.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.129-134
• /
• 2002

In this study, the compliance measurement and cutting operation in tool - machine tool - workpiece system were carried out for the parameters identification of chatter vibration in turning.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.148-148
• /
• 2003

• Journal of the Korean Wood Science and Technology
• /
• 제46권3호
• /
• pp.260-269
• /
• 2018

경산 임당 유적에서 출토된 2-4세기로 추정되는 목제유물의 표면에 존재하는 도구흔적을 분석하여 목제유물의 제작도구와 제작방법을 해석하고자 하였다. 97점의 목제유물의 표면에 존재하는 도구흔적을 분석한 결과, 이들 유물의 제작에 자귀, 끌, 송곳, 손칼, 도끼 등 다양한 도구가 이용되었음이 확인되었다. 특히 갈이틀과 갈이칼의 흔적이 확인됨으로써, 이 시기에 선삭가공 방법이 사용되었음을 알 수 있었다. 또한 선삭가공으로 용기류 목제유물 제작 시 눈질과 선질을 혼합하여 사용했음이 확인되었다. 이는 제작하고자 하는 용기류 목제유물의 형태 및 용도에 따라 적합한 가공방법을 적용한 것으로 판단된다.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.38-45
• /
• 1993

본 연구에서는 선반작업에서의 피삭체의 형상을 특징형상(feature)단위로 정 의하였고, 이 특징형상을 이용하여 형상정의를 수행한 후 가공순서 및 가공조건을 대 화형식으로 입력하면 공구위치 데이터(CL data)를 자동으로 산출하고 이를 기계제어데 이터(MC data)로 변화시켜 주는 NC선반가공 프로그래밍시스템 FeaTURN (Feature-based TURNing system)을 개발하였다.