• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.11
• /
• pp.11-19
• /
• 1994

Turnaround time of a job performing frequent disk I/O operations is greatly affected by I/O bottleneck which incurs due to the large gap in the speeds of I/O devices and the CPU. This paper proposes to employ a Write Dedicated Buffer(WDB) in disk arrays to improve the response time for read requests and analyzes the scheduling policies and the efficiency of the WDB. Through a series of simulations we show that, among the three policies examined, the partial stripe join(PSJ) policy is the most effective in terms of response time for both read and write requests and that, especially when using a WDB on declustered arrays, improvement of response time for read requests becomes greater as the request rate increases.

• International Journal of Concrete Structures and Materials
• /
• v.4 no.1
• /
• pp.9-15
• /
• 2010

Silica fume is a common addition to high performance concrete mix designs. The use of silica fume in concrete leads to increased water demand. For this reason, Florida Department of Transportation (FDOT) allows only a 72-hour continuous moist cure process for concrete containing silica fume. Accelerated curing has been shown to be effective in producing high-performance characteristics at early ages in silica-fume concrete. However, the heat greatly increases the moisture loss from exposed surfaces, which may cause shrinkage problems. An experimental study was undertaken to determine the feasibility of steam curing of FDOT concrete with silica fume in order to reduce precast turnaround time. Various steam curing durations were utilized with full-scale precast prestressed pile specimens. The concrete compressive strength and shrinkage were determined for various durations of steam curing. Results indicate that steam cured silica fume concrete met all FDOT requirements for the 12, 18 and 24 hours of curing periods. No shrinkage cracking was observed in any samples up to one year age. It was recommended that FDOT allow the 12 hour steam curing for concrete with silica fume.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.81-94
• /
• 2007

Recently, the trend in the printing industry includes shorter run lengths and with fast turnaround times. As new markets have made it possible to produce small quantities of high-quality color products at affordable price, the general commercial printing meets the customer's diverse demand by using spot color besides process four colors. Especially, by using spot color for printing the enterprise's logo or specific color, we can see the effect of printing is getting better. With the combination of the right software, ink, media, and device can be treated as a digital proofer for spot color printing, providing significant time and cost savings compared to conventional procedures. The objective of this study is to investigate the quality of spot color proofs printed by ink-jet and dye sublimation proofer using ICC-based color management system. An Epson Stylus Color 3000 ink-jet proofer combined with Best Color Proof XXL RIP was tested for glossy and matte paper. 3M Rainbow dye sublimation proofer was examined using 3M Rainbow controller ver. 4.1 RIP on the manufacturer recommended proofing paper. ICC profiles were generated for each device using ECI 2002 visual target and evaluated for the accuracy of process 4 color reproduction. The test charts consisting of Pantone color 1140 was selected to test the quality of spot color reproduction.

• Journal of Astronomy and Space Sciences
• /
• v.10 no.2
• /
• pp.163-188
• /
• 1993

On the framework of Tolman spacetime model, the caustics around a local perturbed region in redshift is due to the local expansion rate induced by a local density inhomogeneity in real space. We have compared the caustics in redshift space, which are analytically obtained, with the observed redshift-distance patterns of galaxies which are belonging to Coma and Perseus clusters. For the Abell density distribution model and polytropic density profiles which are well-fitting the optical and X-ray observations, respectively, the size of caustics which is defined by "turnaround radius" of a local density perturbed region should give constraints on the sizes and masses of rich clusters and give also a clue to understand the state of hot X-ray emitting gas.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.5 no.2
• /
• pp.31-46
• /
• 2003

The purpose of this study was to explore the ways of improving Korean apparel firms' competitiveness by examining the Korea's number one trading partner U.S. apparel industry. Especially, the Los Angeles area apparel industry which is the second largest and the primary market center on the west coast was analysed. The following strategies are suggested to Korean apparel firms to function more effectively in incleasingly competitive U.S. markets: l)Basics can be produced in lower wage countries meanwhile quick turnaround and high quality works can be produced either in Korea or U.S. 2)Manufacturers might try to have direct relationship with powerful retailers who have their own private labels of store-brand lines. 3)Apparel companies can open market showrooms in the California Market Center. For small firms they can contact with independent representatives who receive commissions for showing lines for manufacturers or rent space for showing the lines during market weeks. 4)Apparel firms can contact buying offices to introduce their products to retail buyers. 5)Korean firms can contact Korean-American apparel firms to gain easy access to U.S.Market.

• Journal of the Korean Institute of Rural Architecture
• /
• v.12 no.3
• /
• pp.35-46
• /
• 2010

The purpose of this study is to interpretate the Korean traditional Private Garden Pavilion -'byoul-seo(別墅)' in the view point of the architectural methodology - the separation of space in Honam province. It is presumed that nature union is archived through the 'yan-sang(玩賞)' which is ultimate state of knowledge that is base on the premises of opened signification in emancipation from narrow view point in the past and cognition of value. therefore, it is needed to know the unworldly point of space perception about the pavilion territory, furthermore to have conceptual method to distinct pavilion from the world. there are two methods in the distinct concept in this pavilion research: unworldly separation and meditative separation. As a result, the followings are conclusions; There two distinctive methods of planning of pavilion by use of the room and column. There are enclosement, turnaround, division of floor area in the room organization method, and it's modification of modulation, diversification of column height and diversification of column use in different space.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1259-1268
• /
• 2002

One of the major goals suggested in distributed system is to improve the performance of the system through the load balancing of whole system. Load balancing among systems improves the rate of processor utilization and reduces the turnaround time of system. In this paper, we design the rule of decision-making and information interchange based on knowledge based mechanism which makes optimal load balancing by sharing the future load state information inferred from past and present information of each nodes. The result of performance evaluation shows that utilization of processors is balanced, the processing time is improved and reliability and availability of systems are enhanced. The proposed mechanism in this paper can be utilized in the design of load balancing algorithm in distributed operating systems.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.5
• /
• pp.48-55
• /
• 2010

As the complexity and the clock speed of semiconductor integrated circuits increase, silicon validation becomes important. In this research, we developed new post-silicon repair & revision techniques to reduce cost and time-to-market. Spare cells are fabricated with the original design and are used for repair when necessary. The interconnections are modified by repair layer revision. The repair cost can be reduced by logic partitioning. Experimental results show that these techniques are effective for low-cost and fast turnaround repair.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.5
• /
• pp.415-422
• /
• 2015

Ballscrews are important motion transfer and positioning units of industrial machinery and precision machines. Positioning accuracy of the feed drive system depends upon axial stiffness of ballscrew systems. As the nut stiffness depends upon preload and operating conditions, analytical modeling of the stiffness is performed through the contact and body deformation analysis. For accurate contact analysis, the contact angle variation between balls and grooves is incorporated in the developed model. To verify the developed mathematical stiffness model, experiments are conducted on the test-rig. Through the uncertainty analysis according to GUM (Guide to the expression of Uncertainty in Measurement), it is confirmed that the formulated stiffness model has over 85% estimation accuracy. After constructing the ballscrew DB, a quick turnaround system for the nut stiffness estimation has been developed in this research.

• Journal of the Korea Society for Simulation
• /
• v.8 no.4
• /
• pp.61-72
• /
• 1999

This paper presents an estimation method of container handling capacity and selection of resource allocation strategies of container terminals using the computer simulation models. Simulation models are developed to model container terminal consisting of 4 berths considering the berth allocation strategies, crane allocation strategies and the total number of container cranes using Arena simulation package. The proposed models do not consider the yard operations and gate operations. All the input parameters for the models are estimated on the basis of the existing container terminal operation data and the planning data for the automated container terminal planned by Korean government. Four berth allocation strategies and three crane allocation strategies are considered. The total number of container cranes considered ranges from 12 to 15. Non-terminating simulation techniques are utilized for the performance comparison among alternatives. The performance measures such as average ship turnaround time, average ship waiting time, average ship service time, the number of containers handled per year, and the number of ships processed per year are used. The result shows that the berth allocation strategy minimizing the sum of the number of ships waiting, the number of busy container cranes and number of ships handled performs better than any other berth allocation strategies. In addition, the crane allocation strategy allocating up to 5 container cranes per berth performs better than any other crane allocation strategies. Finally there are no significant performance differences among the alternatives consisting of different total number of container cranes allocated.