• Wind and Structures
• /
• v.1 no.3
• /
• pp.225-241
• /
• 1998

The high-rise supporting towers of long-span suspension and cable-stayed bridges commonly comprise a pair of slender prisms of roughly square cross-section with a center-to-centre spacing of from perhaps 2 to 6 widths and connected by one or more cross-ties. The tower columns may have a constant spacing as common for suspension bridges or the spacing may reduce towards the top of the tower. The present paper is concerned with the aerodynamics of such towers and describes an experimental investigation of the overall aerodynamic forces acting on a pair of square cylinders in two-dimensional flow. Wind tunnel pressure measurements were carried out in smooth flow and with a longitudinal intensity of turbulence 0.10. Different angles of attack were considered between $0^{\circ}$ and $90^{\circ}$, and separations between the two columns from twice to 13 times the side width of the column. The mean values of the overall forces proved to be related to the bias introduced in the flow by the interaction between the two cylinders; the overall rms forces are related to the level of coherence between the shedding-induced forces on the two cylinders and to their phase. Plots showing the variation of the force coefficients and Strouhal number as a function of the separation, together with the force coefficients spectra and lift cross-correlation functions are presented in the paper.

• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.150-158
• /
• 2006

Over the past few years, many studies have been conducted on the flow, sediment movement, pollution transportation and scour etc. However, very few attempts have been made at the hydraulic studies reflecting upon the ecological function. The objective of this study is to examine the structures of the flow and turbulence in an open circular channel and their relationship to distribution of the organisms and chironomids. Under different flow conditions, the organic matter and some chironomids were injected into the channel. Using the obtained velocity data, the flow mechanisms and the turbulent shear stresses were analyzed. Organic matters and chironomids were distributed on the region that the velocity was slower and the turbulent shear stresses were smaller. Some habitat moved even though chironomids were inhabited. This phenomenon has relationship with the flow mechanism. Some chironomids have distributed around the habitat structure of a hemisphere. The secondary flow has affected the deposition of the organic matters and the distribution of chironomids.

• International Journal of Fluid Machinery and Systems
• /
• v.4 no.1
• /
• pp.199-208
• /
• 2011

This work presents numerical results, using OpenFOAM, of the flow in the swirl flow generator test rig developed at Politehnica University of Timisoara, Romania. The work shows results computed by solving the unsteady Reynolds Averaged Navier Stokes equations. The unsteady method couples the rotating and stationary parts using a sliding grid interface based on a GGI formulation. Turbulence is modeled using the standard k-${\varepsilon}$ model, and block structured wall function ICEM-Hexa meshes are used. The numerical results are validated against experimental LDV results, and against design velocity profiles. The investigation shows that OpenFOAM gives results that are comparable to the experimental and design profiles. The unsteady pressure fluctuations at four different positions in the draft tube is recorded. A Fourier analysis of the numerical results is compared whit that of the experimental values. The amplitude and frequency predicted by the numerical simulation are comparable to those given by the experimental results, though slightly over estimated.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2642-2647
• /
• 2008

Starting characteristics of the axi-symmetric supersonic exhaust diffuser(SED) with a second throat are numerically investigated. Main purpose of this study is to predict theoretical starting pressure of STED using 1-D normal shock theory and to present the range of optimum starting pressure through parametric study with essential design parameters of STED influencing on starting performance. Renolds-Average Navier-Stokes equations with a standard ${\kappa}-{\varepsilon}$ turbulence model incorporated with standard wall function are solved to simulate the diffusing evolutions of the nozzle plume. Minimum(optimum) starting pressure difference of $20{\sim}25%$ between 1-D theory and experimental evidences validated from previous results[5] is also applied to predict those in this system. The analysis results indicate that dominant parameters for diffuser starting in this system is diffuser expansion ratio($A_d/A_t$), which has optimum value 120 and second throat area ratio($A_d/A_{st}$), which has optimum range $3.3{\sim}3.5$.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.4
• /
• pp.139-144
• /
• 1998

Introduced into korea to diversify risk coming from the fluctuation of stock price with opening of the domestic capital market to foreigners, Suppress the turbulence of the dentistic securities market caused by the short term funds from foreign countries and vitalize investment in stock, the hedging transaction of stock index futures will promote the introduction of financial futures and commodity futures transaction. and it will contribute to enhancing the introduction all over the country and accelerating the advancement of the korea banking market. In addition, it is expected to make a great contribution to economic stability and smooth comic activity through its function of risk diversification and price decrement with the launch of the stock index futures.

• Journal of Korean Society of Disaster and Security
• /
• v.10 no.2
• /
• pp.21-28
• /
• 2017

Wind turbulence data is required for engineering calculations of gust speeds, mean and fluctuating loading. Spectral densities are required as input data for methods used in assessing dynamic response. This study is concerned with the estimation of daily instantaneous maximum wind velocity in the meteorological major cities (selected each 6 points) during the yearly 1987-2016.12.1. The purpose of this paper is to present the power spectral densities of the daily instantaneous maximum wind velocity. In the processes of analysis, used observations data obtained at Korea Meteorological Adminstration(KMA), it is assumed as a random processes. From the analysis results, in the paper estimated power spectral densities function(Blunt model) shows a very closed with von Karman and Solari's spectrum models.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.965-967
• /
• 2003

Fuzzy Controller is a system that displays a person's thoughts using membership function and IF-THEN rules. With the help of specialists' knowledge, rule bases can be explained in easy language. Furthermore Fuzzy Controller has strong resistance against turbulence. Its performance is especially prominent when targets cannot be measured in mathematic methods because the fuzzy controller can measure the output using only the relations between the input and output. With the increasing influence of multimedia on our daily lives, vision plays bigger role both in industries and personal lives. Like wise vision is being used in many areas such as detecting and identifying objects. It is difficult to detect and control targets because there is a delay in the calculating when using vision in detecting and controlling objects in large quantity. In this paper we showed how to use fuzzy controller in minimizing the calculation process, controlling target objects and moving view window instead of applying input variation through vision. Ball beam, which has strong nonlinear, was used as the target object and DSP320C6711 IDK by TI(Texas Instruments) company was for the benefit of speedy calculation and vision data operation.

• Nuclear Engineering and Technology
• /
• v.27 no.4
• /
• pp.491-502
• /
• 1995

In accurate prediction of cross-flow based on detailed knowledge of the velocity field in subchannels of a nuclear fuel assembly is of importance in nuclear fuel performance analysis. In this study, the low-Reynolds number k-$\varepsilon$ turbulence model has been adopted in too adjacent subchannels with cross-flow. The secondary flow is accurately estimated by the anisotropic algebraic Reynolds stress model. This model was numerically calculated by the finite element method and has been verified successfully through comparison with existing experimental data. Finally, with the numerical analysis of the velocity Held in such subchannel domain, an analytical correlation of the lateral loss coefficient is obtained to predict the cross-flow rate in subchannel analysis codes. The correlation is expressed as a function of the ratio of the lateral How velocity to the donor subchannel axial velocity, recipient channel Reynolds number and pitch-to-diameter.

• Current Optics and Photonics
• /
• v.3 no.1
• /
• pp.8-15
• /
• 2019

We describe a common optical system that merges a LADAR system, which generates a point cloud, and a more traditional imaging system operating in the LWIR, which generates image data. The optimum diameter of the entrance pupil was determined by analysis of detection ranges of the LADAR sensor, and the result was applied to design a common optical system using LADAR sensors and LWIR sensors; the performance of these sensors was then evaluated. The minimum detectable signal of the $128{\times}128-pixel$ LADAR detector was calculated as 20.5 nW. The detection range of the LADAR optical system was calculated to be 1,000 m, and according to the results, the optimum diameter of the entrance pupil was determined to be 15.7 cm. The modulation transfer function (MTF) in relation to the diffraction limit of the designed common optical system was analyzed and, according to the results, the MTF of the LADAR optical system was 98.8% at the spatial frequency of 5 cycles per millimeter, while that of the LWIR optical system was 92.4% at the spatial frequency of 29 cycles per millimeter. The detection, recognition, and identification distances of the LWIR optical system were determined to be 5.12, 2.82, and 1.96 km, respectively.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.69.3-69.3
• /
• 2019

The CHIMPS2 survey is to extend the JCMT HARP $^{13}CO/C^{18}O$ J=3-2 Inner Milky-Way Plane Survey (CHIMPS) and the ${12}^CO$ J=3-2 survey (COHRS) into the inner Galactic Plane, the Central Molecular Zone (CMZ), and a section of the Outer Plane. When combined with the complementary $^{12}CO/^{13}CO/C^{18}O$ J=1-0 survey at the Nobeyama 45m (FUGIN) at matching 15" resolution and sensitivity, and other current CO surveys, the results will provide a complete set of transition data with which to calculate accurate column densities, gas temperatures and turbulent Mach numbers. These will be used to: analyze molecular cloud properties across a range of Galactic environments; map the star-formation efficiency (SFE) and dense-gas mass fraction (DGMF) in molecular gas as a function of position in the Galaxy and its relation to the nature of the turbulence within molecular clouds; determine Galactic structure as traced by molecular gas and star formation; constrain cloud-formation models; study the relationship of filaments to star formation; test current models of the gas kinematics and stability in the Galactic center region and the flow of gas from the disc. It will also provide an invaluable legacy data set for JCMT that will not be superseded for several decades. In this poster, we will present the current status of the CHIMPS2.