• 항공우주시스템공학회지
• /
• 제9권4호
• /
• pp.62-66
• /
• 2015

During the conceptual design of turboprop aircraft, the power effect driven from rotating propeller is typically obtained from empirical data. In the present paper, propeller power effect was obtained by using unsteady three-dimensional Navier-Stokes solver with $k-{\omega}$ turbulence model for the accurate prediction of turboprop aircraft performance. In order to simulate the relative motion between propeller and fuselage, unsteady sliding mesh method was used. During simulation, three flow conditions such as climb, cruise and descending flight were selected considering the flight envelop of the real turboprop aircraft. For the correction of aerodynamic coefficients, the thrust effect of engine exhaust gas was included based on the engine manufacturer's data. Using the computational results, the correction table for the aerodynamic coefficient of turboprop aircraft was suggested for the performance analysis of turboprop aircraft.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.371-377
• /
• 2009

터보프롭 항공기는 감속장치로 인한 출력한계 및 프로펠러로 인한 최대속도 한계 등으로 대형항공기로 거의 사용되지 않았으나 최근 경제적, 환경적 요인으로 수요가 증가하고 있다. 본 논문에서는 Pratt & Whitney 사의 PW127F 터보프롭 엔진과 Hamilton Standard 사의 568F 프로펠러로 구성된 ATR72-500 중형 터보프롭 항공기의 추진시스템을 Gasturb11 소프트웨어를 이용하여 모델링하였으며 성능해석 결과 추진시스템 모델이 성공적으로 구성되었음을 보여주었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.447-452
• /
• 2011

Propeller shall have high efficiency and improved aerodynamic characteristics to get the thru5t to fly at high speed for the Regional turboprop aircraft. That is way Clark-Y airfoil which is used to conventional turboprop aircraft propeller is selected as a blade airfoil. Adkins method is used for aerodynamic design and performance analysis with respect to the propeller design point. Adkins method is based on the vortex-blade element theory which design the propeller to satisfy the condition for minimum energy loss. propeller geometry is generated by varying chord length and pitch angle at design point of Regional turboprop aircraft. The propeller design results indicate that is evaluated to be properly constructed, through analysis of propeller aerodynamic characteristics using the Meshless method and MRF, SM method.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.648-651
• /
• 2010

FAR25급 터보프롭 항공기에서 프로펠러는 고속으로 비행할 수 있는 추력을 얻기 위해 공기역학적으로 우수하며 높은 효율을 가져야 한다. 프로펠러 형상 설계를 위한 익형은 전형적인 터보프롭 항공기 프로펠러에 사용되는 Clark-Y를 적용하였다. 프로펠러 공력설계 및 해석에는 최소에너지손실을 위한 조건을 만족시키도록 설계하는 와류-깃요소 이론(Vortex-Blade element theory)에 근거한 Adkins의 방법을 이용한 Javaprop을 이용하였다. 시위길이와 피치각 분포를 변경해 가며 FAR25급 터보프롭 항공기의 설계점에 가장 효율적인 프로펠러 형상을 생성하였으며, 전산유체역학을 이용하여 생성된 프로펠러 공력특성 분석을 통해 프로펠러 설계결과가 FAR25급 터보프롭 항공기에 적용 가능함을 확인하였다.

• 항공우주시스템공학회지
• /
• 제7권3호
• /
• pp.15-19
• /
• 2013

Tail wing is important to designing of civil aircrafts, because it is responsible for aircraft stability and control. Tail wing has a role in aircraft control and makes aircraft fly stably without any pilot control input. Also, designing of tail wing determine trim drag force in whole aircraft. Center of gravity(CG) of aircraft travels with various effects as placement of passenger's seats, location of cargo bay, etc. In designing horizontal tail volume, aircraft CG travel has to be considered to have margin so that it should be sized to provide adequate stability and control for the airplane's entire CG range throughout the flight envelope. Finally, it is essential to have sufficient elevator control to perform stall at forward CG for all flaps down configurations. Such stalls establish the FAR stall speed which airplane take-off and landing performance. This paper deals with the process for tail wing design regarding the aircraft CG travel and results for 95-seat type turboprop aircraft.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권2호
• /
• pp.138-145
• /
• 2014

The initial configuration for 95-seat passenger regional turboprop aircraft, the so called KC950, was designed to meet the market requirements. This paper prescribes the initial design based upon aircraft design guidelines and compared the competitive aircraft configurations after considering the related FAR 25 regulations. More specifically, results of design describe how to select the fuselage cross-sectional area, how to layout the cabin, and how to determine the overall shape and physical dimension of the fuselage. Sizing of wing and empennage areas is estimated using empirical equations and tail volume coefficients in this design. Some design guidelines to determine wing sweep angle, taper ratio, incidence angle and location are also introduced.

• 한국항공우주학회지
• /
• 제41권9호
• /
• pp.714-719
• /
• 2013

본 연구 대상 터보 프롭 항공기는 주어진 항공기 임무 수행을 위해 결빙 조건하에서도 운용이 가능하여야 한다. 동 연구에 적용된 터보 항공기의 공기 흡입구 계통은 정상 비행조건하에서 엔진 입구에 최대 전압력을 공급할 수 있도록 설계 및 검증이 되어야 할 뿐만 아니라 결빙조건하에서 생길 수 있는 얼음과 같은 입자가 엔진 흡입구 망으로 들어가서 엔진 화염꺼짐이나 엔진에 심각한 손상을 주지 않도록 하기 위한 관성분리기를 포함하도록 개발이 되어야 한다. 따라서 결빙 조건하에서 형상이 변하는 가변형상의 공기흡입구 조립체를 설계하고 설계 결과 확인을 위해 조립체에 대한 전산 유동 및 구조해석을 수행하였다. 이후 35% 축소형 모델을 제작하여 풍동시험을 수행하였다. 동 논문에서는 흡입구 조립체 개발과정에서 요구되는 공기역학적 설계, 잔산 유동/구조 해석 및 풍동 시험평가 결과를 기술하였다.

• 한국유체기계학회 논문집
• /
• 제15권6호
• /
• pp.11-17
• /
• 2012

The one way fluid structure interaction analysis on advanced propeller blade for next generation turboprop aircraft. HS1 airfoil series are selected as a advanced propeller blade airfoil. Adkins method is used for aerodynamic design and performance analysis with respect to the design point. Adkins method is based on the vortex-blade element theory which design the propeller to satisfy the condition for minimum energy loss. propeller geometry is generated by varying chord length and pitch angle at design point. Blade sweep is designed based on the design mach number and target propulsion efficiency. The aerodynamic characteristics of the designed Advanced propeller were verified by CFD(Computational Fluid Dynamic) and showed the enhanced performance than the conventional propeller. The skin-foam sandwich structural type is adopted for blade. The high stiffness, strength carbon/epoxy composite material is used for the skin and PMI(Polymethacrylimide) is used for the foam. Aerodynamic load is calculated by computational fluid dynamics. Linear static stress analysis is performed by finite element analysis code MSC.NASTRAN in order to investigate the structural safety. The result of structural analysis showed that the design has sufficient structural safety. It was concluded that structural safety assessment should incorporate the off-design points.

• 한국유체기계학회 논문집
• /
• 제15권3호
• /
• pp.19-24
• /
• 2012

Propeller shall have high efficiency and improved aerodynamic characteristics to get the thrust to fly at high speed for the turboprop aircraft. That is way Clark-Y airfoil which is used to conventional 1600kW class aircraft propeller is selected as a blade airfoil. Adkins method is used for aerodynamic design and performance analysis with respect to the propeller design point. Adkins method is based on the vortex-blade element theory which design the propeller to satisfy the condition for minimum energy loss. propeller geometry is generated by varying chord length and pitch angle at design point of turboprop aircraft. The propeller design results indicate that is evaluated to be properly constructed, through analysis of propeller aerodynamic characteristics using the Meshless method and MRF, SM method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1647-1650
• /
• 1997

This paper presents the control law of Automatic Rudder Trim System(ARTS) for the KTX-1. The proposed ARTS is designed mainly t reduce the pilot's work load for trimming in the various conditiions of engine torque. airspeed, and aircraft configuration. The ARTS partially compensates the transient yawing motion due to change of engine power in turboprop aircraft because of the limitation of the actuation speed of the trim motor. In this paper flight test data are analyzed to understand the phenomena and the dynamics of the reversible rudder flight control system is derived. Finally, the control concept and conrtol law of ARTS are described and the characteristics of the ARTS are analyzed through simulation study.