• 터널과지하공간
• /
• 제5권4호
• /
• pp.347-362
• /
• 1995

The purpose of this study was that manage effectively the excavation process of the transport tunnel in DONGHAE mine area by investigating the variationof the surface and groundwater flow system around the tunnel and neighbouring villages. Thus, the effect of excavation and water-prrofing process on the water system has been studied through the naked eye survey of the tunnel and the surface outcrop, joint survey, core drilling, the measurement of the surface water quantity, evapotranspiration and precipitation analysis, rock hydraulics approach, the pressure test of boreholes, the variation of the water level, and finally the numerical analysis. From above approachs, we derived the conclusion that the exhaustion of the surface water was not caused by the tunnel excavation on the groundwater system was minimized by effective water proofing process.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.127-132
• /
• 2004

The third double-track construction part of work, called Chung Ang Railroad line(Deok-So$\∼$Won-Ju) is in progress and the personal museum located 330m from the starting point of Pal-Dang Tunnel(length=4,470m) line in the canyon is to be effected by rock blasting during the tunnel excavation work, especially museum articles and building itself. This paper is the example of application suitable tunnel rock blasting pattern for excavation after the case study about the investigation and analysis of rock blasting noise pollution during tunnel excavation work. The museum is a three-story building, RC concrete structure and is located 17m from the top of the tunnel, in the center of the double-track line. Comparing estimate vibration frequency with site vibration one, it can be verified the reasonable rock blasting noise pollution as improving the application of tunnel excavation rock blasting pattern. The above pattern has been selected economically and effectively and applied to our construction field.

• 한국터널지하공간학회 논문집
• /
• 제26권1호
• /
• pp.1-17
• /
• 2024

터널 굴착으로 인한 지반의 거동 분석은 대변형 영역의 거동을 고려해야 한다. 따라서 본 논문에서는 TBM 터널 굴착으로 인한 주변 지반에 대한 영향을 실제 현장 조건과 동일 조건에서 분석하기 위하여 대변형 유한요소 해석을 수행하였다. 지반의 대변형 거동을 모사하고 예측함에 있어 가장 널리 활용되는 두 가지 해석 기법 - coupled Eulerian Lagrangian (CEL)과 auto-remeshing (AR) 기법 - 을 적용하여 TBM 굴착 과정을 모사하였고 그에 따른 주변 지반에 발생하는 손상영역의 범위를 예측하였다. 굴착손상영역의 범위는 두 기법을 통해 도출된 결과와 굴착손상영역을 정의하는 실험적인 기준을 종합하여 추정하였다. 해석 결과, 두 대변형 해석 기법을 이용하여 도출된 굴착손상영역은 서로 비슷한 크기로 수렴하였고, 기존 연구의 실험 및 계측을 통해 확인된 굴착손상영역 크기와 모양, 경향과도 일치하는 것으로 나타났다. 굴착 되는 지반의 RMR 등급이 좋을수록 굴착손상영역의 크기는 더 커지고, 터널의 직경과는 정비례하는 것으로 나타났다. 반면에, 터널의 심도가 깊을수록 지반의 구속압이 커져서 굴착손상영역은 상대적으로 작게 형성되는 것으로 확인되었다.

• Geomechanics and Engineering
• /
• 제23권5호
• /
• pp.405-418
• /
• 2020

Deep excavation may have impact on the adjacent tunnels. It is obvious that the excavation will adversely affect and even damage the existing tunnels if the induced deformation exceeds the capacity of tunnel structures. It hence creates a high necessity to predict tunnel displacement induced by nearby excavation to ensure the safety of tunnel. In this paper, a simplified method to evaluate the heave of the underlying tunnel induced by adjacent excavation is presented and verified by field measurement results. In the proposed model, the tunnel is represented by a series of short beams connected by tensile springs, compressional springs and shear springs, so that the rotational effect and shearing effect of the joints between lining rings can be captured. The proposed method is compared with the previous modelling methods (e.g., Euler-Bernoulli beam, a series of short beams connected only by shear springs) based on a field measured longitudinal deformation of subway tunnels. Results of these case studies show a reasonable agreement between the predictions and observations.

• 화약ㆍ발파
• /
• 제26권2호
• /
• pp.38-44
• /
• 2008

최근에 국내의 도로건설계획은 기존도로의 선형을 개량하거나 변경하는 데에 중점을 두므로, 건설하고자 하는 도로는 보다 현재 직선화되고 있는 추세이다. 국내의 지형은 대부분 산악지로 구성되어 있어 도로선형의 직선화에 따라 많은 교량과 터널의 계획이 불가피하며, 일부 산악터널의 갱구부는 터널굴착시 작업공간이 협소한 가파른 지형을 갖는 산안 계곡에 위치하는 경우가 있다. 이와 같이 가파른 지형에 터널 갱구부 굴착시 대안으로 역방향 굴착을 들 수 있는데, 3가지의 중요한 고려사항이 있다. 첫째, 적정한 폭, 높이, 그리고 길이로 Pilot 터널을 계획하는 것이며, 둘째, 터널 갱구부의 편토압에 대한 영향을 평가하는 것이고, 셋째, 갱구부의 얕은 심도의 지반조건에 대한 터널 안전성을 확보하는 것이라고 할 수 있다. 따라서 본 연구는 3차원 수치해석에 의해 얻어진 결과를 토대로 역방향 굴착의 적정성 및 Pilot 터널의 적용 범위를 제안코자 한다. 해석결과 Pilot 터널은 터널 안쪽 $20{\sim}25m$ 지점 전부터 갱구부 쪽으로 굴착하는 것이 적정함을 보이고 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.569-578
• /
• 2003

In this paper a determination of the optimal excavation method and machine type for a tunnel under the Han river between the Sungsoo-dong, Sungdong-Gu and the Chungdaw-dong, Kangnam-Gu in the Bundang railway. The geological investigation results show that some fractured zones exist locally under the northern boundary of the Han river bed, but the other regions consist mostly of hard rocks of good quality in the tunnel excavation level. Also, a hign water pressure of $5kgf/cm^2$ and a flash inflow of river water due to old boring holes are expected during tunnel excavation. A EPB shield TBM is selected as a optimal excavation machine for the Han river tunnel considering the geological and ,site conditions.

• 터널과지하공간
• /
• 제7권3호
• /
• pp.191-201
• /
• 1997

Geological and geotechnical surveys, in general, should precede the excavation to ensure the safety of the tunnel and should be followed up according to the various geological condition during the excavation. However actually the standard support patterns which were decided during the design step used be insisted for the whole excavation steps in spite of the various geological conditions. OO tunnel was excavated with NATM and a support pattern type-V in weak rocks. When the tunnel was excavated up to 25m long, the severe displacement was generated in the portal area and the shotcrete was damaged to make the cracks and the tunnel face was totally collapsed. It might happen owing to the one-day heavy rain, but the exact reason for that accident should be found out and the new optimal support patternt needed. Consequently three dimensional numerical analysis was applied for the evaluation of the cause of the tunnel collapse instead of two dimensional analysis, because three dimensional analysis can show better the real field phenomenon than two dimensional analysis in which the load distribution methods are adopted for the tunnel excavation. We could simulate the actual situations with three dimensional finite difference code and propose the new optimal support patterns.

• 한국터널지하공간학회 논문집
• /
• 제7권1호
• /
• pp.3-12
• /
• 2005

본 논문에서는 저토피 구간에서 기존터널 하부에 새로운 터널을 교차하여 신설할 때에 하부 터널굴착으로 인하여 발생하는 교차부 주변지반의 거동과 상부의 기존터널의 거동을 대형모형실험을 통하여 연구하였다. 모형실험은 4.0 m (폭), 3.8 m (높이), 4.1 m (길이) 크기의 콘크리트로 제작된 대형토조에서 모래를 이용하여 상대밀도가 일정한 모형지반을 3.4m높이로 조성하여 실시하였다. 모형실험결과 교차부 주변지반은 하부터널 종방향의 응력전이로 인하여 교차 전과 교차 후에 응력과 지반변위의 차이가 발생하였다. 교차 전 후의 하부터널굴착에 따른 종방향 응력전이가 상부터널에 의하여 차단됨을 알 수 있었다.

• Geomechanics and Engineering
• /
• 제21권2호
• /
• pp.215-226
• /
• 2020

The magnitude and distribution of tunnel deformation were widely discussed topics in tunnel engineering. In this paper, a three-dimensional (3D) finite element program was used for the analysis of various horseshoe-shaped opening expressway tunnels under different geologies. Two rock material models - Mohr-Coulomb and Hoek-Brown were executed in the process of analyses; and the results show that the magnitude and distribution of tunnel deformation were close by these two models. The tunnel deformation behaviors were relevant to many factors such as cross-sections and geological conditions; but the geology was the major factor to the normalized longitudinal deformation profile (LDP). If the time-dependent factors were neglected, the maximum displacements were located at the distance of 3 to 4 tunnel diameters behind the excavation face. The ratios of displacement at the excavation face to the maximum displacement were around 1/3 to 1/2. In general, the weaker the rock mass, the larger the ratio. The displacements in front of the excavation face were decreased with the increasement of distance. At the distance of 1.0 to 1.5 tunnel diameter, the displacements were reduced to one-tenth of the maximum displacement.

• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.62-69
• /
• 2004

The objective of this study is to estimate the distribution of a zone disturbed by excavation (EDZ) around tunnels that have been excavated at about 500 m depth in pre-Tertiary hard sedimentary rock. One of the most important tasks is to evaluate changes in the dynamic stability and permeability of the rock around the tunnels, by investigating the properties of the rock after the excavation. We performed resistivity and acoustic tomography using two boreholes, 5 m in length, drilled horizontally from the wall of a tunnel in pre-Tertiary hard conglomerate. By these methods, we detected a low-resistivity and low-velocity zone 1 m in thickness around the wall of the tunnel. The resulting profiles were verified by permeability and evaporation tests performed at the same boreholes. This anomalous zone matched a high-permeability zone caused by open fractures. Next, we performed resistivity monitoring along annular survey lines in a tunnel excavated in pre-Tertiary hard shale by a tunnel-boring machine (TBM). We detected anomalous zones in 2D resistivity profiles surrounding the tunnel. A low-resistivity zone 1 m in thickness was detected around the tunnel when one year had passed after the excavation. However, two years later, the resistivity around the tunnel had increased in a portion, about 30 cm in thickness, of this zone. To investigate this change, we studied the relationship between groundwater flow from the surroundings and evaporation from the wall around the tunnel. These features were verified by the relationship between the resistivity and porosity of rocks obtained by laboratory tests on core samples. Furthermore, the profiles matched well with highly permeable zones detected by permeability and evaporation tests at a horizontal borehole drilled near the survey line. We conclude that the anomalous zones in these profiles indicate the EDZ around the tunnel.