• Journal of Veterinary Clinics
• /
• v.30 no.1
• /
• pp.80-85
• /
• 2013

Twenty one cows in Goyang and Paju cities were referred due to displacement of the abomasum and foreign body in the rumen. Omentopexy and rumenotomy through a right flank celiotomy were performed for treatment of abomasal displacement and the foreign body removal in the rumen. The right paralumbar fossa is clipped and prepared surgically. Local anesthesia is instituted by performing inverted L block. The abdomen was entered through 25 to 30 cm vertical incision in the right paralumbar fossa starting 4 to 5 cm ventral to the transverse processes of the lumbar vertebrae. A 14-gauge needle with rubber tubing attached is inserted to relieve the gaseous pressure and to facilitate further exploration and manipulation. The rumen was gently pulled out of the abdominal cavity and incision was made at the omentum. Rumenotomy was done and retrieved the foreign body. After the rumen was rinsed with sterile saline, the rumen wall was closed by a Lembert suture technique. The omentum was closed by a simple continuous suture. Right flank omentopexy was performed for the surgical correction of abomasal displacement. Recovery results among 21 cows included 9 excellent, 5 good, 2 fair and 5 bad. It was considered that operation of abomasal displacement and foreign body removal in the rumen through right flank celiotomy was a good surgical technique to reduce expenses, surgical pain, and surgery time.

• Journal of Energy Engineering
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2003

Pressurized fluidized bed combustion unit is operated at pressures of 1~1.5 MPa with combustion temperatures of 850~87$0^{\circ}C$. The pressurized coal combustion system heats steam, in conventional heat transfer tubing, and produces a hot gas supplied to a gas turbine. Gas cleaning is a vital aspect of the system, as is the ability of the turbine to cope with some residual solids. The need to pressurize the feed coal, limestone and combustion air, and to depressurize the flue gases and the ash removal system introduces some significant operating complications. The proportion of power coming from the steam : gas turbines is approximately 80:20%. Pressurized fluidized bed combustion and generation by the combined cycle route involves unique control considerations, as the combustor and gas turbine have to be properly matched through the whole operating range. The gas turbines are rather special, in that the maximum gas temperature available from the FBC is limited by ash fusion characteristics. As no ash softening should take place, the maximum gas temperature is around 90$0^{\circ}C$. As a result a high pressure ratio gas turbine with compression intercooling is used. This is to offset the effects of the relatively low temperature at the turbine inlet.

• Applied Biological Chemistry
• /
• v.24 no.4
• /
• pp.213-217
• /
• 1981

A Kimchi pasteurizer consisting of preheating, holding, cooling and liquid separation sections was built with copper tubing coil and glasses. The liquid portion of a Chiness Cabbage Kimchi prepared with 3% NaCl solution was preheated and held for 3 minutes at sterilization temperature. Thereafter it was cooled momentarily and recombined with the untreated solid part of Kimchi At four different temperatures of $68^{\circ}$, $75^{\circ}$, $81^{\circ}$ and $85^{\circ}C$ Kimchi was sterilized and examined for the sterilization effects by measuring acid and pH changes of the Kimchi when stored at $15^{\circ}C$. The shelf-life of sterilized Kimchi was prolonged by two folds compared with the untreated one. When Kimchi was sterilized at different maturing stages. the less cured one prolonged its shelf-life more effectively.

• The Journal of Korean Medicine
• /
• v.16 no.1 s.29
• /
• pp.96-117
• /
• 1995

1. The Pung(風) is the necessary power for growth and maintenance of life. 2. The characteristics of the Pung(風) is the Yang evil, the features for opening and excretion, mobility and rapid change. That is the major cause of all diseases, and its mobility is the main character. 3. Jung Pung(中風) is the same concept of apoplexy in Western medicine. 4. Jung Pung(中風) is classified on the basis of pathology, anatomy, and histology in Western Medicine, but In Oriental Medicine that is classified on the basis of symptom and severity of disease. 5. In Western Medicine, Jung Pung(中風) was regarded as the local cause of disease, but in Oriental Medicine regarded as the physiological changes caused by the weakness of the whole body. 6. In the emergency care, the method of GaeKeum is compared to Levin tubing, the method of to the use of urokinase for the promotion of cerebrovascular circulatio, and the method of To(吐法) to suction for the elimination of Dam(痰), the method of Hun(熏法) to the use of solution for the improvement of circulation. 7. With the comparison of the cause and diagnosis, the hemorrhagic disease and infarction were regarded as the major agents in Western Medicine and the symptom appeared in the patient was the standard of diagnosis and therapy in Oriental Medicine. 8. In the Western therapy of cerebral hemorrhage, the method of coagulation and hemostasis was used for the elimination of hematoma and cerebral edema, but in Oriental Medicine, the method of YanghaelGiHael(凉血止血) was used for descending the PungHwa(風火) and hemostasis. 9. In the period of recovering injury, the physical therapy was underlined for the recovering of partial function in Western Medicine, the method of accupuncture and drug therapy was adapted for the normal function of the whole body.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.243-243
• /
• 1996

백금착물 항암제 후보물질로서 합성된 KBP31705-Cl27, KBP30603-901을 기존 화합물인 cisplatin 및 carboplatin과 pharmacokinetic profile을 비교 검토하였다. 웅성 Sprague-Dawley rat을 sodium pentobarbital 마취하에서 방광 및 대퇴동맥과 정맥에 polyethylene tubing을 사용하여 catheterization시켰다. Urine 배출이 안정화되었을 때 대퇴정맥내로 cisplatin과 KBP31705-Cl27은 2 mg/kg, carboplatin과 KBP 30603-901은 20mg/kg 용량으로 주사한 후 2, 4, 6, 8, 10, 15, 20, 30, 45, 60, 120 분에 대퇴동맥으로부터 혈액을 채취하였으며 urine은 약물투여 후 1시간 간격으로 4시간동안 채취하였다. Plasma와 urine중의 platinum농도는 inductively coupled plasma-mass spectrometer를 사용하여 측정하였고, pharmacokinetic parameters는 non-linear least square computer Program인 PCNONLIN을 이용하여 산출되었다. 혈중 platinum농도와 시간의 관계에서 KBP31705-Cl27은 cisplatin과 비교하여 alpha-phase에서 혈중 농도는 낮지만 비슷한 양상을 나타내었고, beta-phase에서는 비교적 느리게 소실됨을 보였다. Urine으로 4시간동안 배출된 platinum양은 각각 투여량의 52, 56%로서 두 약물에서 비슷하였다. 또한 KBP30603-901은 carboplatin과 비교하여 alpha-phase는 거의 비슷한 패턴을 나타내었으나, beta-phase는 훨씬 느리게 감소하여 반감기가 길다는 것을 보여 주었으며 또한 이것은 urine으로 4시간동안 배출된 platinum양이 KBP30603-901의 경우 투여량의 46%로서 carboplatin의 59%보다 적게 배출된다는 data와도 일관됨을 보여주었다. 이상의 결과로 볼 때 KBP30603-901이 다른 백금착물 항암제보다 체내에 머무르는 시간이 길어 혈중에서 보다 오랜 시간동안 머물러 높은 유효농도를 유지할 수 있을 것으로 사료된다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.2
• /
• pp.98-103
• /
• 2009

The nuclear power plants have been safely operated by plugging the steam generator tubes which have the crack indications. Tube rupture events can occur if analysts fail to detect crack indications during in-service inspection. There are various types of crack indication in steam generator tubes and they have been detected by the eddy current test. The integrity assessment should be performed using the crack-sizing results from eddy current data when the crack indication is detected. However, it is not easy to evaluate the crack-depth precisely and consistently due to the complexity of the methods. The current crack-sizing methods were reviewed in this paper and the suitable ones were selected through the laboratory tests. The retired steam generators of Kori Unit 1 were used for this study. The round robin tests by the domestic qualified analysts were carried out and the statistical models were introduced to establish the appropriate depth-sizing techniques. It is expected that the proposed techniques in this study can be utilized in the Steam Generator Management Program.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.1
• /
• pp.42-47
• /
• 2001

The purpose of this study was to investigate for filtration efficiency of several dust masks, comparing with filtration efficiency certified by KOSHA(Korea Occupational Safety & Health Agency), and to require of the right use of protective respirators. Using a welding fume generator and chamber, several dust masks, which were widely used in the workplaces in korea, were tested for their filtering efficiency for stainless steel arc welding fume. The filtration efficiency testing system consisted of a welding fume generator, a chamber and a filtration unit. The filtration unit was made of a mask which was inserted into the sampling cassette and another sampling cassette, which contained mixed cellulose ester filter paper. These two cassettes were connected with tubing. Stainless steel arc welding fume generator was delivered into an chamber. The welding fume in the chamber was passed into the filtration unit with flow rate of 30 liter/min. The welding fume filtration efficiency was evaluated by gravimetric measurement. Metal concentrations in the welding fume before and after filtration were measured with inductive coupling plasma analyzer. Following results were obtained: Filtration efficiency of welding fume for common hygienic mask was 63.82% and the average efficiencies for A, B, C, D, E, F and G masks were 94.62%, 96.58%, 83.20%, 82.76%, 77.25%, 86.55% and 93.22%, respectively. Our results indicate that dust masks used widely in the welding workplaces in korea are not proper for protecting worker's health and then the use of fume mask should be required.

• The Korean Journal of Physiology
• /
• v.9 no.2
• /
• pp.17-22
• /
• 1975

Adult nonpregnant female rabbits were subjected to the study of the effects of carbon monoxide inhalation on the uterine motility. Animals were anesthetized with intravenous injection of nembutal, 35 mg/kg, and the uteri were exposed. Polyethylene tubing which had a small hole near the blind tip was inserted in the loop and normal saline was infused at a constant rate of 1.5 ml/min. On the other end of the loop, an outlet of fluid was made. When a peristaltic wave proceeded to the hole, a rise of the pressure was ensued and it was transmitted to the pressure transducer, making an upward deflection of the recording pen on the physiograph. Carbon monoxide, 1,000 ppm in the concentration, was inhaled through a tracheal cannula for 30 minutes, following fresh air for 30 minutes. In some cases, pure oxygen was also supplemented for another 30 minutes. Uterine motility was expressed in terms of the impulse that was the time integral of the pressure and of the frequency of the peristaltic waves. The results obtained were as follows. 1. When 1,000 ppm carbon monoxide was inhaled for 30 minutes, the impulse dropped to $72{\pm}16.5%$ and the frequency to $75{\pm}22.7%$ of the values obtained before the gas administration. 2. By fresh air for 30 minutes, the impulse and the frequency restored to $77{\pm}25.7%$ and $92{\pm}21.1%$, respectively. 3. By the supplement of pure oxygen for 30 minutes, no remarkable improvement were revealed, showing $89{\pm}35.2%$ in the impulse and $91{\pm}10.8%$ in the frequency, respectively. 4. There was an appreciable discrepancy in the recovery courses of the impulse and the frequency, suggesting different mechanisms attributable to the alteration by carbon monoxide inhalation.

• Design & Manufacturing
• /
• v.7 no.1
• /
• pp.45-49
• /
• 2013

Since the shell-molds are used to make casting the metal parts for the automobile industry, the quality may well be inconsistent with the lower productivity, increasing the cost of the end products. The primary elbow design shell molded steel castings being produced through extrusion process has $180^{\varnothing}$ O.D., $150^{\varnothing}$ I.D., 14mm thickness and 400mm length, while being processed onto the left side of the tubing. The primary cause for the poor processing is the uneven manual shell molding. If the manual shell molds should be produced to have even quality, they would not be processed for tube linking. The purpose of this study was to develop the flask-molds for manufacturing of the shell molds to ensure mass-production, consistent quality, ommission of processing and comfortable working environment. For this purpose, four flask-molds were produced and thereby, four shell molds were assembled. In particular, the shell molds for processing were formed of the fine coated sand to be blown. As a result, productivity increased about three times, while a consistent quality was ensured. Furthermore, the tubes could be linked with each other without being processed, while pallets could be stacked, stored, transported and managed more easily. In a nut-shell, the molding theory could be applied more effectively. However, it is conceived that this study should be followed up by future studies which will research into reliability and endurability of the end products.

• Journal of Dairy Science and Biotechnology
• /
• v.25 no.1
• /
• pp.1-7
• /
• 2007

A Whey-based medium was formulated with Lactobacillus brevis to investigate whether any functional peptides could derive from whey protein. The optimal concentrations of the ingredients of the medium for the growth of Lactobacillus were determined as 2% whey protein concentrate and 1% glucose and 0.5% yeast extracts. The growth of Lb. brevis was improved with the supplementation of yeast extracts than glucose. The viable cells counts of Lb. brevis reached to 2.0 × 10$^8$CFU/mL in the whey-based medium. The whey protein hydrolysates recovered from the supernatant after centrifugation at 10,000 x g for 10min induced strong inhibitory activity against ACE. When the whey protein hydrolysate were partially purified by a membrane tubing below 8,000Da, the partially purified fraction remained 64.7 ${\pm}$ 3.6% of the ACE inhibition activity of the whey protein hydrolysates and IC$_{50}$ was 38.8 ${\pm}$ 2.2mg/mL. The whey-based medium was proved to be effective in producing ACE inhibitory peptides by lactic bacteria fermented whey protein.