• Journal of Advanced Marine Engineering and Technology
• /
• 제37권5호
• /
• pp.548-556
• /
• 2013

생산량 증대를 위한 방법으로 다른 두 내경의 2단 튜빙을 이용한 기법이 제안되고 있다. 본 연구에서는 다양한 2단 튜빙조합을 고려하여 각 목적에 부합하는 조합들을 제시하였다. 기존연구에서 고려한 생산량뿐만 아니라 유동안정성을 확보하는 결과를 제시하였다. 유동안정성은 tubing pressure traverse, 액체부피비, 운영조건의 안정성을 통해 분석되었다. 본 연구에서 분석한 가상유전의 경우 순현재가치가 가장 큰 2단 튜빙은 하단이 4.5 in 내경에 길이가 2000 ft이며 상단은 5.5 in 내경에 길이가 8000 ft인 조합이다. 2단 튜빙간 마찰압력손실 차이는 크지 않았기 때문에 단일튜빙과 비교했을 때보다 다양한 조합이 가능하였다. 튜빙하단에선 liquid loading을 방지하기 위해 작은 액체부피비를 유지하는 것이 중요한데, 이는 2단 튜빙 하단에서 작은 내경을 사용함으로써 가능하였다. 생산운영의 분석결과로부터 다양한 튜빙 디자인이 가능함을 확인하였다.

• 대한조선학회논문집
• /
• 제51권3호
• /
• pp.212-219
• /
• 2014

As subsea production has been revived up, the demand of subsea equipment has also been increased. Among the equipment, subsea tree plays a major role in safety. The tubing hanger is one of the most important components in subsea tree. In this study structural reliability analysis on dual bore tubing hanger of subsea tree is performed. The target reliability which is introduced in ISO regulation is used for judging whether tubing hanger is safe or not. The considered loads are working pressure, working temperature and suspended tubing weight. Thermal-stress analysis on tubing hanger is performed and kriging model is created based on the results of FEM analysis. According to von Mises criterion, limit state equation can be estimated. Reliability analysis is performed by using level 2 method and the result is verified by that of Monte Carlo Simulation. For finding most probable failure point, enhanced HL-RF method is adopted. Because the reliability of model doesn't reach target reliability, an improvement measure should be considered. Thus, it is suggested to change the material of tubing hanger main body to AISI 4140.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.749-761
• /
• 2014

Tubing adapter is a key connection device in Gas-Tight Deep-Sea Water Sampler (GTWS). The sealing performance of the tubing adapter directly affects the GTWS's overall gas tightness. Tubing adapters with good sealing performance can ensure the transmission of seawater samples without gas leakage and can be repeatedly used. However, the sealing performance of tubing adapters made of different materials was not studied sufficiently. With the research discussed in this paper, the materials match schemes of the tubing adapters were proposed. With non-linear finite element contact analysis and sea trials in the South China Sea, it is expected that the recommended materials match schemes not only meet the requirements of tubing adapters' sealing performance but also provide the feasible options for the following research on tubing adapters in GTWS.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3225-3234
• /
• 2022

Alloy 690 tubing has been shown to be highly resistant to primary water stress corrosion cracking (PWSCC). Nevertheless, predicting the failure by PWSCC in Alloy 690 SG tubes is indispensable. In this work, a Bayesian-based statistical approach is proposed to predict the occurrence of failure by PWSCC in Alloy 690 SG tubing. The prior distributions of the model parameters are developed based on the prior knowledge or information regarding the parameters. Since Alloy 690 is a replacement for Alloy 600, the parameter distributions of Alloy 600 tubing are used to gain prior information about the parameters of Alloy 690 tubing. In addition to estimating the model parameters, analysis of tubing reliability is also performed. Since no PWSCC has been observed in Alloy 690 tubing, only right-censored free-failure life of the tubing are available. Apparently the inference is sensitive to the choice of prior distribution when only right-censored data exist. Thus, one must be careful in choosing the prior distributions for the model parameters. It is found that the use of non-informative prior distribution yields unsatisfactory results, and strongly informative prior distribution will greatly influence the inference, especially when it is considerably optimistic relative to the observed data.

• 항공우주시스템공학회지
• /
• 제12권1호
• /
• pp.47-56
• /
• 2018

본 논문에서는 정지궤도복합위성 추진계 배관망의 독자적인 구조해석을 실시하였고, AIRBUS의 구조해석결과와 비교분석을 통해 추진계 배관망의 구조적 건전성 및 해석방법의 신뢰성을 평가하였다. 추진계 배관망의 구조적 신뢰성 확보는 정지궤도복합위성 추진계의 매우 중요한 핵심요소이다. 따라서 CAE 프로그램을 통해 직접 추진계 배관망 모델링을 수행하였고, 발사환경에서 구조해석을 실시하여 응력을 도출하였다. 내압응력해석, 조립정렬해석, 정현파진동해석, 랜덤진동해석의 하중조건에 따라 Hoop stress, Axial stress, Bending stress, Torsion stress를 구하였고, 이를 모두 고려한 von Mises 응력 계산 후 안전여유 결과 값을 도출함으로써 추진계 배관망의 구조적 건전성을 판단하였다.

• 비파괴검사학회지
• /
• 제35권4호
• /
• pp.258-267
• /
• 2015

Eddy current testing is widely used for inspecting steam generator tubing in nuclear power plants (NPPs). The inspection technique for steam generator tubing in NPPs should be qualified in accordance with examination guidelines. When the components of a qualified system such as eddy current tester, probe, and data analysis program, are changed, the equivalency of the modified system to the originally qualified system must be verified. The eddy current tester is the most important part of an eddy current testing system because it excites and transmits alternating currents to the probe, receives coil impedance of the probe and generates signals for anomalies. The Korea Hydro & Nuclear Power Co., Ltd. (KHNP) developed an eddy current testing system with an eddy current tester and data acquisition-analysis program for inspecting the steam generator tubing in NPPs; this system can be used for an array probe and as a bobbin and rotating probes. The equivalency assessment for the currently developed system was carried out, and we describe the results in this paper.

• 대한화학회지
• /
• 제39권11호
• /
• pp.863-868
• /
• 1995

내벽이 유리로 코팅된 스테인레스 스틸 관, 실리카로 코팅된 스테인레스 스틸관 및 보통 스테인레스 스틸관 등 여러 재질의 관에 C18 (5.mu.) 고정상을 충전시켜 길이 30cm, 내경 1mm 및 0.5mm인 마이크로컬럼들을 제작하고 그 성능을 비교 조사하였다.p-Nitroaniline과 N, N-dimethyl-o-nitro-p-toluidine 및 ethyl-benzene 등을 시험 용질로 사용하였다. 유리 또는 실리카로 코팅된 컬럼이 보통 스테인레스 스틸 컬럼보다 효율이 우수하며 컬럼내면이 거울같이 고와야 정지상 충전이 잘되는 것을 확인하였다. 유리코팅된 경우 내경 0.5mm, 길이 30cm 인 컬럼에 대해서도 이론단수가 10,000을 상회하는 결과를 얻을 수 있었다.

• 한국압력기기공학회 논문집
• /
• 제5권1호
• /
• pp.20-24
• /
• 2009

There is extensive tubing pipe in the nuclear power plant under high temperature and pressure. Erosion and corrosion defects are expected on this tubing pipe due to environmental and mechanical factors. In this study, Guided Ultrasonic Wave technique was applied to detect defects. The technique explores the advantages of the Guided Ultrasonic Wave method that inspects along the wall of the pipe and can travel long distances, providing rapid collection of data. This paper presents a case study of the Guided Ultrasonic Wave testing of 3/8" tubing pipe. This study offers to understand detected signals through correlation between amplitude and depth of defects.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.79-83
• /
• 2008

The corrugated stainless steel tubing(CSST) for the fuel gas piping system can be installed easily and quickly. It is often constructed under the ceiling and the wall which has a good flexibility and installation in comparison with iron pipe. However, the quality of the CSST is determined to depend upon the welding skill of stainless steel tubing. In this study, it is tested by controlling jet point of Ar as inert and cooling gas, and also compared with the bead state of welding point and the performance. As a result, it has the best condition when the jet point of Ar is located behind $5{\sim}10mm$ of the welding point.

• 폴리머
• /
• 제32권5호
• /
• pp.440-445
• /
• 2008

정수압 상태의 선형저밀도 폴리에틸렌 튜빙의 파손 메커니즘과 파손 모폴로지를 연구하였다. 비디오현미경과 주사전자현미경을 이용한 관찰 결과, 선형저밀도 폴리에틸렌 튜빙의 파손모드는 내면에서 외면으로 진전되는 크랙을 수반하는 취성파괴임을 확인하였다. 또한 산화유발시간과 적외선분광분석을 통하여, 파손된 선형저밀도 플리에틸렌 튜빙의 단면상에 열화에 의한 발열 피크와 카르보닐 피크의 증가를 관찰하였다. 열 가속에 의한 음력과 수명특성 사이의 관계를 고려한 선형저밀도 폴리에틸렌 튜빙의 가속수명시험법 및 시험장치를 개발하였다. 선형저밀도 폴리에틸렌 튜빙의 장기 정수압 상태의 수명을 예측하기 위해 아레니우스 모델과 와이블 분포를 적용한 통계학적 기법을 도입하였다. 그 결과, 사용온도 $25^{\circ}C$에서의 선형저밀도 폴리에틸렌 튜빙의 장기수명을 평가/분석하였다.