• 제목/요약/키워드: tube internal

검색결과 588건 처리시간 0.022초

폭약 기폭위치에 따른 발파 분진제어용 워터튜브 주입수의 분무확산 실험 및 평가 (Experiment and Evaluation of Mist Diffusion from Water Tube for Blasting Dust Control in accordance with the Explosives Position)

  • 양형식;고영훈;김정규;노유송;박훈;조상호
    • 터널과지하공간
    • /
    • 제25권1호
    • /
    • pp.46-55
    • /
    • 2015
  • 발파분진을 제어하기 위하여 도폭선을 결합한 양수튜브를 고안하였다. 최적설계를 위한 실험의 일환으로 도폭선 기폭위치에 따른 물의 확산을 비교 실험하였다. 실험결과를 평가하기 위하여 고속카메라로 촬영하여 영상을 이미지 분석 하였고, 워터튜브의 분무확산 과정을 묘사하기 위해 AUTODYN 프로그램을 이용하여 해석한 결과를 분무초기거동 실험영상과 비교하였다. 외부기폭의 경우 분무거동이 교차유동을 나타냈고, 내부기폭의 경우 방사형 전파유동을 나타냈다. 수치해석 결과 워터튜브 내부기폭의 경우 수중폭발에서와 같은 내부 Bubble Ring이 발생하였고, 지반에의 반사압 영향에 의해 추가적인 Bubble Ring이 형성되었다. 또한, 워터튜브의 분무미립화 성능을 Weber 수를 통해 평가하였고, 워터튜브의 충분한 미립화 성능을 확인할 수 있었다.

Optical analysis of low concentration evacuated tube solar collector

  • Teles, Mavd R.;Carvalho, Raquel;Ismail, Kamal A.R.
    • Advances in Energy Research
    • /
    • 제5권3호
    • /
    • pp.227-237
    • /
    • 2017
  • The continuous increase of emission rates of green house gases and the effects on global warming added a new dimension to the problem of substituting the petroleum and its derivatives by environment friendly and sustainable energy sources for the world. Solar and wind energy appear at the top of the list of renewable of high potential, widely available, of dominated technology and well accepted. Brazil is one of the few countries in the world that receives number hours of sunshine exceeding 3,000 hours per year with a daily average of 4.5 to 6 kWh. However, this potential is largely unexplored and poorly tapped. The number of renewable systems implanted in Brazil has grown in recent years, but still insignificant when compared, for example, with Germany and Spain among others. This paper presents the results of an optical study on small concentration solar collector with evacuated tube enveloping the absorber and internal reflective surface fixed on the bottom part of the evacuated tube. The designed collector has a 2D geometrical concentration ratio between 2.455 and 4.91. The orientation of the solar collector, the ratio of the radius of the receiver to the radius of the absorber, the incidence angle for each period of the year, the collector inclination angle, the aperture angle of the reflective surface, concentration and optical efficiency were determined. The ray traces and flux distribution on the absorber of the evacuated tube solar collector were determined by using the program Ray Optics Simulation. The optical efficiency varies during the year according to the solar declination. For the periods were the solar declination is close to zero the efficiencies are maximum, and the variation during the day is around 25.88% and 99.9%. For the periods were the solar declination is maximum the efficiencies are minimum, and the variation during the day is around 23.78% and 91.79%.

1시간 자가호흡관찰에 의한 기계적 호흡치료로부터의 이탈 (Weaning Following a 60 Minutes Spontaneous Breathing Trial)

  • 박건욱;원경숙;고영민;백재중;정연태
    • Tuberculosis and Respiratory Diseases
    • /
    • 제42권3호
    • /
    • pp.361-369
    • /
    • 1995
  • 연구배경: 이탈의 방법은 통상적으로 자가호흡 관찰, IMV, PSV등이 행해지고 있지만, 이중 어떤 방법이 다른 것보다 우수하다는 결론은 없다. 자가호흡관찰에 의한 이탈에는 주로 T-tube를 이용하는 방법이 이용되는데, high flow로 산소를 공급하는 시스템이 필요하다. 이탈 후에는 기도유지가 어렵거나 지속적인 흡입치료가 필요한 경우를 제외하고는 발관을 하는 것이 호흡일을 감소시키는 것으로 알려져 있는데, 이는 기관내 튜브가 그 내경에 따라 다양하지만 정상 기도저항(< $2cmH_2O/L/sec$)보다 훨씬 더 높은 기도저항을 유발하기 때문이다. 이에 저자들은 기관내 튜브를 통한 산소공급으로 1시간 자가호흡관찰 후 이탈 및 발관을 동시에 시행하는 방법의 임상적 유용성을 보고하고자 한다. 방법: 대상은 1993년 6월부터 1994년 6월까지 호흡부전으로 기계적 호흡치료를 받은 환자들이며, 이탈시도의 기준은 첫째, 호흡부전을 초래한 기저질환이 호전되고, 둘째, 생명증후들이 안정한 상태로 유지되며, 셋째, $FiO_2$ 0.4 이하에서 동맥혈 가스분석상 산소분압이 55mmHg 이상인 경우로 하였다. 55명 중 위의 이탈기준을 만족시키는 18명의 환자의 평균 연령은 $51.5{\pm}17.5$세이며, 남녀비는 1:1 이였고, 총 기계호흡시간은 38시간에서 341시간의 범위(평균 $105.9{\pm}83.4$시간)를 보였다. 이탈방법은 이탈기준을 만족시키는 대상환자에서 기관내 튜브를 통해 분당 6L의 산소를 공급하고 1시간 367동안 이탈시킨 상태에서 의사가 환자 옆에서 이학적 소견 및 활력징후를 관찰하고, 30분과 60분 후에 각각 동맥혈 가스분석을 시행했다. 이 첫 1시간동안 환자의 전신상태, 호흡횟수, 맥박수 및 동맥혈가스분석등을 모두 고려하여 청색증, 발한, 심한 빈맥이나 고혈압, 혈압저하, 늑간의 내함, 기이호흡등이 나타나지 않고, 산소분압이 55~70mmHg 정도로 유지될 경우 일단 이탈성공이 기능하다고 판단하였다. 그리고, 다시 인공호흡기를 연결하여 1~2시간 동안 환자를 안정시킨 후, 최종 이탈과 발관은 환자에게 물어보아서 자가호흡을 할수 있다고 의사를 표현한 경우 동시에 이탈과 발관을 시행하도록 하였다. 결과: 1) 기계적 호흡치료를 받았던 55명 중 위의 이탈기준을 만족시키는 18명의 환자에게 총19회의 이탈을 시도하여 16회가 성공해 84.2% 성공율을 보였으며, 1명은 이탈 실패 후 2번째 이탈시도시 성공하였다. 2) 호흡부전의 원인별로는 만성폐쇄성 호흡기질환 환자 14명 중 8명에서 이탈시도의 기준을 만족시켰고, 폐혈증은 21명 중 4명, 폐부종은 6명 중 3명, 농약중독은 6명 중 1명, 속립성결핵은 3명 중 1명, 흡인성 폐렴은 5명 중 1명에서 이탈시도가 가능하였다. 3) 이탈성공군과 이탈실패군의 이탈 전후 분당 호흡 횟수의 변화를 보면, 성공군에서는 1예에서 이탈 후 30분에 분당 호흡횟수가 30회에 이른 후 감소한 것을 제외하고는 나머지 전례에서 분당 호흡횟수가 30회 미만이데 반해, 실패군에서는 모두 30회 이상의 분당 호흡 횟수를 보이고 지속적으로 증가하는 양상을 보였고, 이탈전후 산소분압의 변화를 보면 실패군의 1예를 제외하고는 나머지 전례에서 산소분압이 55mmHg 이상으로 유지되었다. 결론: 이상의 결과로 기관내 튜브를 통한 산소공급으로 1시간 자가호흡관찰 후 이탈 및 발관을 동시에 시행하는 방법은 상당히 높은 이탈 성공율을 보이는, 쉽고 효율적인 방법이며 동시에 이탈과 발관을 시행하여도 문제가 있는 경우는 없었다.

  • PDF

원형튜브의 파열압력에 관한 연구 (A Study on the Burst Pressure of Circular Tubes)

  • 이영신;강문중;조원만
    • 대한기계학회논문집
    • /
    • 제16권6호
    • /
    • pp.1056-1063
    • /
    • 1992
  • 본 연구에서는 평면변형이론을 적용하여, 진원형 튜브의 경우 주로 Durban의 과정에 따르고, 몇 가지의 타원형 모델들에 대하여 상용 유한 요소프로그램인 Solvia 를 이용하여 각기 해석하고, 파열압력에 대한 예측값을 구하였으며 각기 해석하고, 파열압력에 대한 예측값을 구하였으며 결함의 영향을 파악하였다.또 반경 대 두께 비가 다른 2가지 시편에 대한 파열시험을 수행하여 해석결과와 비교하였다.

필라멘트 와인딩 장력에 따른 Composite Bushing의 특성에 관한 연구 (Properties of Composite Bushing with Filament Winding Tension)

  • 조한구;김광용
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 춘계학술대회 논문집
    • /
    • pp.34-34
    • /
    • 2010
  • This paper describes effect of the bending deformation of high voltage composite bushing with winding tension. The composite bushing can be formed, by adding silicone rubber sheds to a tube of composite materials. The FRP tube is internal insulating part of a composite bushing and is designed to ensure the mechanical characteristics. Generally the properties of FRP tube can be influenced by the winding angle, wall thickness and winding tension. As winding tension is increased glass contents was increased in the range of 70.4~76.6%. In the bending test, winding tension is increased residual deflection was decreased in the range of 14.0~12.2 mm.

  • PDF

원통내면의 자기연마에 관한 연구 (A Study on Internal Surface Finishing of Tube Using Magnetic Assisted Polishing)

  • 이용철;박상길;송치성;이종렬;이득우
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2000년도 춘계학술대회 논문집
    • /
    • pp.792-795
    • /
    • 2000
  • The magnetic assisted finishing thought to be one of the potential methods for the automatic polishing process. In this study, magnetic assisted finishing process was experimentally attempted to polish the intrnal surface of the cylindrical tube. The newly developed magnetic tool was used, and its polishing performance exmined. From the experimental results, it is found that i ) the newly developed tool is suitable for intrnal surface finishing of the tube. ii ) the surface roughness of 0.9~1${\mu}{\textrm}{m}$Rmax before polishing is improved to the value of 0.2 ${\mu}{\textrm}{m}$Rmax in the finishing experiment of stainless steel STS3602L tube in 6 minutes finishing time.

  • PDF

심리스 튜브 제조공정 시 피어싱 플러그의 파손거동 (Failure Behavior of Piercing Plug during Seamless Tube Manufacturing Process)

  • 임영빈;윤정모
    • 열처리공학회지
    • /
    • 제30권5호
    • /
    • pp.207-214
    • /
    • 2017
  • In this study, failure behavior of piercing plug for seamless tube manufacturing process was studied. Three different kinds of passed piercing plugs (10, 90, 215 times) were prepared. The shape deformation of the passed piercing plugs was observed by 3D coordinate measuring machine, and the oxidized layer on the surface of piercing plug was observed by optical microscopy. The length reduction of piercing plug presented at 215 times passed plug. It was found that the oxidized layer consisted of outer scale, inner scale and internal oxidation layers, and the inner scale layer had vertical cracks, and interfaces had horizontal cracks. We proposed the failure mechanism of piercing plug during seamless tube manufacturing process based on the formation of vertical and horizontal crack.

평활관 및 미세휜관 내에서의 물을 이용한 열전달 및 압력강하 특성에 관한 실험 (Experimental study of heat transfer and pressure drop characteristics for flow of water inside circular smooth and micro-fin tubes)

  • 박혁범;유승문;윤백;유국철
    • 설비공학논문집
    • /
    • 제9권4호
    • /
    • pp.454-461
    • /
    • 1997
  • Heat transfer and pressure drop for single phase flow of water in circular smooth and micro-fin tubes are measured. Copper tubes of 9.52 and 7mm outer diameter were used. The internal roughness in micro-fin tubes was formed by spiral grooves having $25^{\circ}$ helx angle, 0. 12mm fin height and 0.454mm pitch in 9.52mm tubes; $18^{\circ}$ helix angle, 0.15mm fin height and 0.322mm pitch in 7mm tubes. The measured friction factor and heat transfer coefficient are compared with relevant previous works, and the correlations for micro-fin tube are developed.

  • PDF

플랜지 형성 액압성형시 공정변수에 따른 성형 특성 (Effect of Process Parameters on Forming Characteristics of Flange Hydroforming Process)

  • 이호진;주병돈;최민규;문영훈
    • 소성∙가공
    • /
    • 제19권2호
    • /
    • pp.113-119
    • /
    • 2010
  • Hydroforming is the technology that utilizes hydraulic pressure to form tube or sheet materials into desired shapes inside die cavities. Tube hydroforming provides a number of advantages over the conventional stamping process, including fewer secondary operations, weight reduction, assembly simplification, adaptability to forming of complex structural components and improved structural strength. In many case, hydroformed parts have to be structurally joined at some point. Therefore it is useful if the hydroformed automotive parts can be given a localized attachment flange. In this study for the numerical process design FE analysis was performed with DYNAFORM 5.5. Die parting angle and circumferential expansion ratio was optimized. With optimized condition, bulge and hydroforming experiments to form flange were performed. Forming characteristic at various pressure conditions was analyzed and optimized internal pressure condition was evaluated. The results show that flanged parts can be successfully produced by tube hydroforming process.

다양한 전열관 내부 홈 변화에 의한 열전달 성능에 관한 연구 (A Study on the Heat Transfer Performance Using Various Grooved Heat Transfer Tubes)

  • 한규일;정원규;예석수;박성현
    • 동력기계공학회지
    • /
    • 제4권1호
    • /
    • pp.26-32
    • /
    • 2000
  • Single-phase heat transfer performance and pressure drop for internally grooved tubes with angles were studied. Experiments were carried out in a counter flow heat exchanger with water as a working fluid. Two commercially available internally grooved tubes and smooth tube were tested. The internal diameter of the smooth tube was 16.5mm and the internal diameters of grooved tubes were 15.4mm, 14.9mm, 15.0mm, 16.7mm, respectively. Grooved angles in the tubes were $37^{\circ},\;43^{\circ},\;45^{\circ},\;50^{\circ}$, respectively. An experimental device to measure the friction factor and heat transfer coefficient was constructed. The experimental results were obtained for the fully developed turbulent flow of water in tube on the condition of uniform heat flux. As the increase of flow rate, Reynolds number, numbers of groove and grooved angle led to the increase of pressure drop. Also this paper showed that heat transfer rate increased with increasing numbers of groove and grooved angle. An empirical relation taken from this study represented most of the data within ${\pm}25%$.

  • PDF