• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.804-809
• /
• 2009

The present study measured frost pattern on a cylinder to propose empirical correlation equations for the local and average frost thickness, frost density and frost mass. The key parameters were diameter of the cylinders (7mm, 20mm), cooling surface temperature of the circular tube, absolute humidity of air, air temperature and air velocity. A 50% ethylene glycol aqueous solution was applied as a coolant. The frost thicknesses at both front and rear were larger than those at the other parts, while they were increased as diameter of the cylinder was increased. The local frost thicknesses at high air velocity were more uniform than those at low air velocity. The values predicted by Kim et al. under the freezer condition showed larger by the maximum of $30{\sim}50%$ than the measured data under heat pump condition. The empirical correlations for the local and average frost thickness and frost mass were proposed. The correlation equations for the frost thickness and frost mass under the heat pump condition in the present study might predict more accurate than the other correlation equations. The proposed correlations might be applied for the freezer condition within the maximum 15% deviation from the previous correlations under freezer condition.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.4
• /
• pp.225-229
• /
• 2006

TiAlN coatings are available in various industry fields as a wear resistant coating for high-speed machining, due to its high hardness, excellent oxidation and corrosion resistance. The corrosion resistance of TiAlN multilayer coatings is better than that of single TiN coatings. Most of TiAlN coated layers were formed by heat treatment of coating layers with a non-stoichiometric $Ti_xAl_{1-x}N$. In this study, TiAlN coated layer was prepared by R.F magnetron sputtering and investigated the thermal behavior for heat treatment at various temperature in tube furnace. The formation of large particles with porous microstructure and phase change from HCP to FCC were observed on coated layer during heat treatment over $850^{\circ}C$ and it reduced the corrosion resistance of coated TiAlN layers.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.550-554
• /
• 2007

A one-dimensional heat transfer model coupled with parameter estimation is developed in this study to predict the effective thermal conductivities of soil formation and borehole resistances from in situ field test data. In this application a new method of using initial ignoring time(IIT) obtained from error estimation is tried and turned out to be successful in determining soil thermal conductivities. The validity of this model is accomplished through comparison of the predicted temperature profiles of the model with the data from laboratory scale experimental setting. Eleven test boreholes were constructed in Ochang, Chungcheong Buk Do, and thermal response test was carried out with each borehole. The results of the in situ tests were analyzed with our 1-D numerical model and compared with the results of line source method. The comparison shows that the thermal properties from line source method is a little lower (${\sim}95%$)than those from numerical method. The reason of such result seems to be the lower thermal conductivity of grout material, which is not counted in line source method.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.26.1-26.1
• /
• 2010

In this talk we outline the current understanding of solar flares, mainly focusing on magnetohydrodynamic (MHD) processes. A flare causes plasma heating, mass ejection, and particle acceleration which generates high-energy particles. The key physical processes producing a flare are: the emergence of magnetic field from the solar interior to the solar atmosphere (flux emergence), formation of current-concentrated areas (current sheets) in the corona, and magnetic reconnection proceeding in a current sheet to cause shock heating, mass ejection, and particle acceleration. A flare starts with the dissipation of electric currents in the corona, followed by various dynamic processes that affect lower atmosphere such as the chromosphere and photosphere. In order to understand the physical mechanism for producing a flare, theoretical modeling has been develops, where numerical simulation is a strong tool in that it can reproduce the time-dependent, nonlinear evolution of a flare. In this talk we review various models of a flare proposed so far, explaining key features of individual models. We introduce the general properties of flares by referring observational results, then discuss the processes of energy build-up, release, and transport, all of which are responsible for a flare. We will come to a concluding viewpoint that flares are the manifestation of the recovering and ejecting processes of a global magnetic flux tube in the solar atmosphere, which has been disrupted via interaction with convective plasma while rising through the convection zone.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1660-1662
• /
• 1996

Superconducting current lead is one of the promising applications of the oxide high-Tc superconductors, because they have the advantage of decreasing heat conduction to low temperature region, comparing with a conventional cooper alloy lead. High critical current density is a key factor for the applications such as current lead. $(Bi,Pb)_{2}Sr_{2}Ca_{2}Cu_{3}O_{x}$ high Tc superconductor hase been investigated in terms of critical current density. Bi-2223 superconducting current lead made by CIP and solid state sintering process. Bi-2223 current lead that heat treated at $836\;^{\circ}C$ for 240 h in 1/13 $PO_2$ had over $500\;A/cm^2$ of critical current density at 77K. We knew that the superconducting properties of tube type current leads were better than rods type of them. And we investigated the relation of Bi-2223 formation and heat treatment condition by XRD and SEM analysis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.4
• /
• pp.303-306
• /
• 2012

Anti-angiogenesis therapy is one of the most promising strategies for the treatment of cancer. We investigated the anti-angiogenesis activity of an extract from the ark shell Scapharca subcrenata and attempted to purify the active compounds. The crude extract of the ark shell inhibited the proliferation of human vein endothelial cells (HUVEC-1) and tube formation by human dermal microvascular endothelial cells (HMEC-1). The methanol extract of the viscera of the ark shell showed activity. The ark shell extract acts as an angiogenesis inhibitor and could be developed further as a health substance, functional food, and anticancer agent.

• The Korean Journal of Pain
• /
• v.23 no.4
• /
• pp.270-273
• /
• 2010

Acupuncture has been widely used in alternative medicine for pain relief but may have many complications due to lack of appropriate cares. Pharmacopuncture is a sort of acupuncture that injects a herbal ingredient through a thin tube for the purpose of combining the effects of the herb and acupuncture and it has many pitfalls. The agents, used in pharmacopuncture are not refined for a desired effect and not produced by sterile standard processes under strict medical surveillance. We, report a case of a 44-yr-old male patient who had multiple abscesses in the psoas region with fever, right low back and hip pain that began after the pharmacopuncture treatment. This case shows that although pharmacopuncture has been practiced widely, it is important that the appropriate aseptic technique should be used to prevent severe infections and other complications.

• The Korean Journal of Nuclear Medicine
• /
• v.15 no.1
• /
• pp.13-20
• /
• 1981

Using stannous chloride, optimum conditions for $^{99m}Tc$ labelling of some scanning agents such as phytic acid (P A), dimercaptosuccinic acid (DMSA), and calcium diethylenetriaminepentaacetate (Ca-DPTA) were established. Methods of separation and identification of the labelled compounds were practiced by a paper- or thin layer- chromatography. Biodynamic studies of the compounds were also carried out. The results indicate that the molar ratios of the chelating agent and stannous chloride varies only with the concentrations of the chelating agents, and thus the amounts of the stannous chloride per labelling tube were nearly constant $(500\sim600{\mu}g)$ regardless the variation of the molar ratios. It suggests that the given experimental conditions require about $500{\mu}g$ of stannous chloride regardless of the chelating agents. Under alkaline pH, the labelling yields were drastically decreased due to the probable formation of colloidal tin compounds. Biodynamic data showed characteristic patterns with each compound indicating that they are all suitable for the relevant scanning applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.327-327
• /
• 2011

A nonthermal bioplasma source was developed for application to human liquid fluids by making use of nano-size tungsten tips. Characteristics of the plasma source are investigated. Here we have used the AC voltage system. The bioplasma source generated by a tungsten tip with quartz tube and ground electrode is a low-temperature plasma without making any noticeable damage to cells at a low power operation. The breakdown voltage and current signals are measured by high voltage probe (Tektronix P6015A) and current probe (P6021). Variation of breakdown temperature near the tip electrode is larger than that in the neighborhood of ground electrode. Bubble formation during discharge has been recorded and investigated by using the high speed camera. The existence and behavior of hydroxyl and superoxide radicals are detected and measured by spectrometers. The electrical and optical properties of breakdown characteristics are also investigated.

• Korean Journal of Head & Neck Oncology
• /
• v.35 no.2
• /
• pp.27-30
• /
• 2019

Parathyroid adenoma can cause extracapsular bleeding. In 1934, Capps first reported a case of massive hemorrhage secondary to rupture of a parathyroid adenoma. Recently, we experienced a 73-year-old female presented with pharyngeal discomfort and extensive ecchymosis over the neck without history of trauma. Endoscopic investigation revealed submucosal hemorrhage in the posterior wall of the hypopharynx. CT scan and ultrasonography demonstrated the presence of a mass below the left thyroid lobe. Serum calcium level was normal and PTH level was elevated. We underwent left thyroidectomy and parathyroidectomy 2 weeks later from first visit. During the operation, hypopharyngeal mucosa was teared and it was treated with pharyngostoma formation and L-tube feeding. We report a rare case of normocalcemic parathyroid adenoma with spontaneous hemorrhage and propose the proper management period with a literature review.