• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1778-1780
• /
• 2004

Microwave heating system of KSTAR consists of ECH and LHCD. ECH and LHCD offer the reliability of operation in the beginning of plasma formation and non-inductive current drive for long time steady state operation with maintaining MHD stability, respectively. LHCD demands 5 GHz of frequency and consists of c-band waveguide, 4-port circuitor, dry dummy load, dual directional coupler, E-bend, arc detector. Our system is a lineup type pulse modulator that has 45 kV of output pulse voltage, 90 A of pulse current, 4 us of pulse width. 1:4 step-up pulse transformer, 7 stages of PFN and thyratron tube (E2V, CX1191D) are used in this modulator. The purpose of this paper is to show the modulator design and experimental result.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.379-380
• /
• 2002

Steam generators (S/G) of pressurized water reactors are large heat exchangers that use the heat from the primary reactor coolant to make steam in the secondary side for driving turbine generators. Reciprocating sliding wear experiments have been performed to examine the wear properties of Incoloy 800 and Inconel 690 steam generator tubes in high temperature water. In present study, the test rig was designed to examine the reciprocating and rolling wear properties in high temperature (room temperature - $300^{\circ}C$) water. The test was performed at constant applied load and sliding distance to investigate the effect of test temperature on wear properties of steam generator tube materials. To investigate the wear mechanism of material, the worn surfaces were observed using scanning electron microscopy. At $290^{\circ}C$, wear rate of Inconel 690 was higher than that of Incoloy 800. It was assumed to be resulted from the oxide layer property difference due to the a\loy composition difference. Between 25 and $150^{\circ}C$ the wear loss increased with increasing temperature. Beyond $150^{\circ}C$, the wear loss decreased with increasing temperature. The wear loss change with temperature were due to the formation of wear protective oxide layer. From the worn surface observation, texture patterns and wear particle layers were found. As test temperature increased, the proportion of particle layer increased.

• Journal of the Korean institute of surface engineering
• /
• v.42 no.6
• /
• pp.280-286
• /
• 2009

In this study, the corrosion property of copper alloy tubes in seawater has been investigated. Three copper alloys of nominal composition Cu-20Zn-2Al(Al-Brass), Cu-30Ni(CN70/30) and Cu-10Ni(CN90/10) were considered. The samples were immersed in 3%NaCl flowing solution at $90^{\circ}C$ for 30, 50 and 80 days. Corrosion rate of copper alloy tubes in 3%NaCl flowing solution was investigated by weight-loss measurements and electrochemical test. The CN70/30 showed lowest corrosion rate among three copper alloy tubes. Because of passive films formation, corrosion rates of three types of copper tubes were decrease with time. Surface characteristics of copper alloy tubes were analyzed by optical micrograph(OM), scanning electronic microscopy (SEM), energy dispersive X-ray analysis(EDAX) and X-ray diffraction patterns(XRD). CN70/30 showed partly pitting problem on the surface owing to high Fe content, even though having high resistant against corrosion. Cracks appeared on the surface of CN90/10 and CN70/30 after more than 50 days immersion, which could be derived from high nickel contents.

• Journal of The Korean Astronomical Society
• /
• v.44 no.5
• /
• pp.143-150
• /
• 2011

This paper reports a characteristic motion of a polarity inversion line (PIL) formed at the solar surface, which is newly found by performing a three-dimensional magnetohydrodynamic simulation of flux emergence in the Sun. A magnetic flux tube composed of twisted field lines is assumed to emerge below the surface, forming a bipolar region with a PIL at the surface. A key finding is the successive half-turn rotation of the PIL, leading to the formation of a quadrupolar-like region at the surface and a magnetic configuration in the corona; this configuration is reminiscent of, but essentially different from the so-called inverse-polarity configuration of a filament magnetic field. We discuss a physical mechanism for producing the half-turn rotation of a PIL, which gives new insights into the magnetic structure formed via flux emergence. This presents a reasonable explanation of the configuration of a filament magnetic field suggested by observations.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.2
• /
• pp.98-104
• /
• 2020

Thalassemias are considered important health issues throughout Iraq, involving its Kurdistan region. This disorder, particularly its major form, needs lifelong regular transfusions. But this form of medical care is associated with various complications including red cell alloimmunization and autoimmunization. This study determined the frequency and associations of alloimmunization among multi-transfused patients with β-thalassemia major. The subjects were 204 patients who were registered at a thalassemia care center in Sulaymaniyah-Iraqi Kurdistan. The patients' records were analyzed, their red cells were phenotyped for ABO/RhD antigens using the gel card method, and irregular antibody screening/identification was performed using the standard tube method. Alloantibodies were detected in 5.8% of the patients, while DAT was positive in 4% of the patients, which indicated autoantibodies. The identified alloantibodies were anti-E (2.4%), anti-C (1.4%), anti-e (1%), and anti-K (1%). A patient's age at the start of transfusion (>2 years) (P=0.042) and a positive history of transfusion reactions (P=0.003) were correlated with a significantly higher rate of alloantibody formation. From the results of our study, we conclude that measures to decrease the development of alloantibodies may incorporate matching for Rhesus and Kell systems and early induction of blood transfusions.

• Korean journal of applied entomology
• /
• v.22 no.3 s.56
• /
• pp.203-207
• /
• 1983

Biological, physical and chemical characteristics of suppressive and conducive soils to ginseng root rot were investigated. Population of antagonistic microorganisms to Fusarium solani was much higher in suppressive soils than in conducive soils, whereas the numbers of Fusarium species were smaller in suppressive soils. Mycelial growth and chlamydospore formation of Fusarium solani were inhibited in suppressive soils. In the water extract of suppressive soils, lysis of germination tube and macroconidia of F. solani was occurred by antagonistic microorganisms at 4 hours after treatment. There were no significant differences in physical and chemical characteristics between supressive soils and conducive soils to ginseng root rot, however, clay content of suppressive soils was a little higher than that of conductive soils.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.8
• /
• pp.1183-1190
• /
• 2002

An experimental study is performed to investigate the characteristics of near wake behind a circular cylinder with serrated fins using the constant temperature anemometer and through flow visualization. Previous report(Boo et al., 2001) shows that there are three different modes in vortex shedding behavior. This paper is focused on the identification of the physical reasons why the difference iss occured in vortex shedding. The through flow velocity crossing fins decreases as increasing fin height and decreasing fin pitch mainly due to the flow resistence. Vortex shedding is affected strongly by velocity distribution around fin tube, especially by the velocity gradient. The velocity distribution at X/d=0.0 has lower gradient with increasing freestream velocity and fin height and decreasing fin pitch. Those differences in velocity gradients generate different vortex shedding mechanism.

• Journal of the Korean Ceramic Society
• /
• v.33 no.4
• /
• pp.471-477
• /
• 1996

During Bi(Pb)-Sr-Ca-Cu-O superconductor wire fabrication the effect of the initial packing density on the final characteristics of superconductor wire was systematically studied. To increase the powder packing density with uniform distribution of superconducting core a billet insertion method processed by CIP was applied instead of the commonly used vibration and ramming method of powder insertion into silver sheath. Compared with the vibration and ramming method the billent insertion technique processed by CIP cause the 30% incre-specimen with 130${\mu}{\textrm}{m}$(core thickness : 45 ${\mu}{\textrm}{m}$)and 5.24 mm width processed at 84$0^{\circ}C$for 200hrs. shows specimen with 130${\mu}{\textrm}{m}$ (core thickness ; 45${\mu}{\textrm}{m}$)and 5.24 mm width processed at 84$0^{\circ}C$ for 200 hrs. shows maximum 34A for Ic and 16, 700 A/cm2 for Ic measured at 77K and 0T. Also the sample rolled 3 times shows maximum 7, 2A for Ic and 11, 000 A/cm2 for 77K and 0T. Based on X-ray experimental results the formation of Bi-2223 and texture were significantly well developed at the interface between the superconducting core and silver sheath as compared with those of the interior area of superconducting core.

• Journal of the Korean Magnetic Resonance Society
• /
• v.11 no.1
• /
• pp.24-29
• /
• 2007

[ ${\beta}ig-h3$ ] is an extracellular matrix protein that mediates cell adhesion through interaction with integrins. The 18 residue YH motifs within each fas-1 domain are known to be responsible for the interaction with the ${\alpha}_v{\beta}_5$ integrin, and the synthetic YH motif peptides are known to inhibit endothelial tube formation and reduces the number of blood vessels, and so expected to be an effective inhibitor of angiogenesis. In this study, we solved the 3D structure of the 18 residue YH motif peptide (EALRDLLNNHILKSAMCA; D2 peptide) within the second fas-1 domain of ${\beta}ig-h3$ using NMR. The Peptide has ${\alpha}-helix$ structure at the C terminal region but the N terminal region is flexible. The present structural information may be helpful for developing more effective peptide drug candidate for the treatment of diseases dependent on angiogenesis.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.9
• /
• pp.1485-1492
• /
• 2015

Makgeolli is a traditional wine in Korea and has been traditionally believed to exhibit health benefits. However, the inhibitory effect of dealcoholized makgeolli (MK) on cancer has never been investigated scientifically. In this study, MK exhibited an anti-angiogenic effect by inhibiting tube formation in human umbilical vein endothelial cells, without cytotoxicity. Treatment with MK reduced the proliferation of AGS human gastric adenocarcinoma cells in a dose-dependent manner and increased the sub-G1 population. Next, we evaluated whether MK could induce apoptosis in AGS cells by using the terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) assay or Annexin V method. Treatment with MK at 500 and 1,000 μg/ml increased the number of TUNEL-positive AGS cells. Under the same conditions, MK-treated (500 and 1,000 μg/ml) cells showed significant induction of early or late apoptosis, compared with untreated cells (no induction). In addition, MK also induced phosphatase and tensin homolog (PTEN) expression in AGS cells. However, p53 expression in AGS cells was not changed by MK treatment. Furthermore, MK at 500 mg/kg·d reduced the tumor size and volume in AGS tumor xenografts. Taken together, MK may be useful for the prevention of cancer cell growth.