• 한국재난정보학회 논문집
• /
• 제10권2호
• /
• pp.230-237
• /
• 2014

자연재해로 인한 재해자 지원제도에는 크게 자조(自助)와 공조(共助)그리고 공조(公助)가 있다. 본 연구에서는 재해자 지원 제도 중의 공조(共助)(지진보험, JA공제, 전노제)를 대상으로 동일본 대지진의 사례를 분석하여 보급 현황과 함께 급부의 제약 등에 관련된 여러 문제점에 대해 검토하는 것을 목적으로 한다. 연구의 방법으로는 각종 간행물과 홈페이지를 활용한 자료 답사, JA건경이나 손해보험회사에 대한 히어링을 실시했다.

• 한국항해항만학회지
• /
• 제29권4호
• /
• pp.319-325
• /
• 2005

Planning for the construction of ports and harbors usually takes place without the consideration of tsunamis because of their rare occurrence, approximately once every 100 years. However, recent warnings indicate that massive earthquakes could occur in Japan within the next 30 years. Earthquakes may generate large-scale tsunamis. Therefore, any tsunamis in the vicinity of Japan would also be expected to affect eastern Korea. Therefore, with the looming concerns of tsunamis and earthquakes, immediate attention must be given to the planning of ports and harbors. The warnings deserve an immediate response. The threatened regions cover a very large territory, and the degree of severity of the tsunamis is forecasted to be varied. Therefore, any modeling of the potential scenarios will require a broad array of possibilities. The objective of this paper is to consider the potential damage from tsunamis to ports and moored ships in Japan and Korea. In addition, consideration will be given to how the construction plans of ports and harbors should be changed to cope with the threats from earthquakes and tsunamis.

• 한국산업융합학회 논문집
• /
• 제23권4_2호
• /
• pp.603-609
• /
• 2020

The purpose of this study is to research dampers, which are applied mainly to buildings adjacent to the coast, such as nuclear facilities, and used for ventilation and can safely protect lives and equipment in emergency situations. Comparing the equivalent stress for three models with hinge reinforcement and support reinforcement based on the early design model for Damper, in the Base model, the highest stress occurred in the part of hinge, especially in the centrally mounted hinge, and after reinforced the hinge, it was occurred in the rear support. For models reinforced hinges and supports, it is considered that reinforcement for stiffness will be required in the future as it entered within the range of allowable stress. For the safety factor distribution, the minimum safety ratio was sufficiently secured at least 1 and was high at the edge of the Damper frame and the Blade. As the hinge was reinforced, the safety factor distribution of Blade was increased, and it was verified that the safety factor was secured through the support reinforcement.

• 한국식품영양학회지
• /
• 제28권2호
• /
• pp.202-218
• /
• 2015

Many countries have introduced new imported food safety measures, following the accident at Fukushima Daiichi Nuclear Power Station. This study was conducted to evaluate the measures contents and effects on food trades values. Eight percent of members were notified the introduced measures to the World Trade Organization. The measures' contents were banning imports, enhancing inspection and adding certification requirement. The covered regions were some prefectures, entire Japan or all affected countries. European Union introduced a measure that subjecting foods originating from 12 prefectures to import at designated ports with required certification. The measures were amended 8 times until March 2014 to apply listed foods from 15 prefectures. The trade value of fishery products and miscellaneous foods were affected. Australia introduced a measure that required additional inspection of dairy, fishery and plants products from 13 prefectures with subsequent amendments. The trade value had no effect in tested foods. Chinese Taipei introduced a temporary import ban for all foods from 6 prefectures. Trade values for fruits were affected. The United States issued an import alert for detention without examination for listed prefectures and goods without introducing new measures. Although no specific products were affected, trade values for all foods were affected.

• 한국안전학회지
• /
• 제34권5호
• /
• pp.159-166
• /
• 2019

The seismic PSA is to probabilistically estimate the potential damage that a large earthquake will cause to a nuclear power plant. It integrates the probabilistic seismic hazard analysis, seismic fragility analysis, and system analysis and is utilized to identify seismic vulnerability and improve seismic capacity of nuclear power plants. Recently, the seismic risk of domestic multi-unit nuclear power plant sites has been evaluated after the Great East Japan Earthquake and Gyeongju Earthquake in Korea. However, while the currently available methods for system analysis can derive basic required results of seismic PSA, they do not provide the detailed results required for the efficient improvement of seismic capacity. Therefore, for in-depth seismic risk evaluation, improved system analysis method for seismic PSA has become necessary. This study develops a system analysis method that is not only suitable for multi-unit seismic PSA but also provides risk information for the seismic capacity improvements. It will also contribute to the enhancement of the safety of nuclear power plants by identifying the seismic vulnerability using the detailed results of seismic PSA. In addition, this system analysis method can be applied to other external event PSAs, such as fire PSA and tsunami PSA, which require similar analysis.

• Ocean Systems Engineering
• /
• 제9권3호
• /
• pp.261-285
• /
• 2019

Nowadays in offshore industry there are emerging hazards with vague property such as act of terrorism, act of war, unforeseen natural disasters such as tsunami, etc. Therefore industry professionals such as offshore energy insurers, safety engineers and risk managers in order to determine the failure rates and frequencies for the potential hazards where there is no data available, they need to use an appropriate method to overcome this difficulty. Furthermore in conventional risk based analysis models such as when using a fault tree analysis, hazards with vague properties are normally waived and ignored. In other word in previous situations only a traditional probability based fault tree analysis could be implemented. To overcome this shortcoming fuzzy set theory is applied to fault tree analysis to combine the known and unknown data in which the pre-combined result will be determined under a fuzzy environment. This has been fulfilled by integration of a generic bow-tie based risk analysis model into the risk assessment phase of the Risk Management (RM) cycles as a backbone of the phase. For this reason Fault Tree Analysis (FTA) and Event Tree Analysis (ETA) are used to analyse one of the significant risk factors associated in offshore terminals. This process will eventually help the insurers and risk managers in marine and offshore industries to investigate the potential hazards more in detail if there is vagueness. For this purpose a case study of offshore terminal while coinciding with the nature of the Caspian Sea was decided to be examined.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.530-541
• /
• 2019

To improve our current understanding of tsunami-like solitary waves interacting with a row of vertical slotted piles on a sloping beach, a 3D numerical wave tank based on the CFD tool $OpenFOAM^{(R)}$ was developed in this study. The Navier-Stokes equations were employed to solve the two-phase incompressible flow, combining with an improved VOF method to track the free surface and a LES model to resolve the turbulence. The numerical model was firstly validated by our laboratory measurements of wave, flow and dynamic pressure around both a row of piles and a single pile on a slope subjected to solitary waves. Subsequently, a series of numerical experiments were conducted to analyze the breaking wave force in view of varying incident wave heights, offshore water depths, spaces between adjacent piles and beach slopes. Finally, a slamming coefficient was discussed to account for the breaking wave force impacting on the piles.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.967-973
• /
• 2021

In 2011, an earthquake and subsequent tsunami hit the Fukushima Daiichi Nuclear Power Plant, causing simultaneous accidents in several reactors. This accident shows us that if there are several reactors on site, the seismic risk to multiple units is important to consider, in addition to that to single units in isolation. When a seismic event occurs, a seismic-failure correlation exists between the nuclear power plant's structures, systems, and components (SSCs) due to their seismic-response and seismic-capacity correlations. Therefore, it is necessary to evaluate the multi-unit seismic risk by considering the SSCs' seismic-failure-correlation effect. In this study, a methodology is proposed to obtain the seismic-response-correlation coefficient between SSCs to calculate the risk to multi-unit facilities. This coefficient is calculated from a probabilistic multi-unit seismic-response analysis. The seismic-response and seismic-failure-correlation coefficients of the emergency diesel generators installed within the units are successfully derived via the proposed method. In addition, the distribution of the seismic-response-correlation coefficient was observed as a function of the distance between SSCs of various dynamic characteristics. It is demonstrated that the proposed methodology can reasonably derive the seismic-response-correlation coefficient between SSCs, which is the input data for multi-unit seismic probabilistic safety assessment.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.238-238
• /
• 2018

2011년 동일본 대지진으로 발생된 지진해일로 인해 막대한 경제적 손실과 인명피해가 발생하였고, 2차적 사회적 피해가 지속되고 있다. 또한 국내에서도 최근 경주와 포항지역에서 지진이 발생하여 피해가 발생함에 따라 재난의 불확실성에 대한 대비의 중요성이 강조되고 있고, 과거 안전하다고 했던 재난에 대한 위험성에 대해 국민들의 관심이 증대되었다. 피해사례가 2차례 있는 지진해일의 경우도 동일본 대지진 이후로 전 세계적으로 해일에 대한 위험성이 재평가되고 있다. 지진해일은 해저에서 발생하는 지진에 의한 것으로 발생지점 및 강도 등을 예측하기가 쉽지 않으므로, 지진발생에 대한 가상 시나리오를 이용한 연구가 진행되고 있다. 가상 시나리오를 활용하여 현재까지 많은 침수예상도가 제작되었으나, 다양한 시나리오 대해서 검토되지 않았다. 따라서 본 연구에서는 과학적 보간법을 이용하여 수치모형을 수행하지 않고 기수행된 연구 DB를 활용하여 지진해일 피해를 예측하는 기술을 개발하였다. 연구 DB는 국립재난안전연구원에서 수행된 지진해일 자료를 활용하였고, 전국단위를 기반으로 지진규모 7.0~9.0 내에 지진해일을 유발하는 지진에 대해 지진해일의 피해를 예측할 수 있는 기술을 개발하였다. 기술을 검증하기 위해 5개의 진원지에 대하여 과거 발생 지진규모부터 극한의 지진규모를 가정한 수치모의 결과와 본 연구의 결과를 비교하였다. 본 연구는 격자 1km인 광역모형의 모의결과를 활용하였으므로 실제로 해안지역의 침수양상의 정확도가 높지 않지만 향후 고정밀 공간해상도에 대하여 모의를 수행한다면 지진해일로 발생하는 범람 및 침수를 보다 정밀하게 예측할 수 있을 것이라 기대된다.

• International Journal of Computer Science & Network Security
• /
• 제22권12호
• /
• pp.229-238
• /
• 2022

Due to digitization, data has become a tsunami in almost every data-driven business sector. The information wave has been greatly boosted by man-to-machine (M2M) digital data management. An explosion in the use of ICT for farm management has pushed technical solutions into rural areas and benefited farmers and customers alike. This study discusses the benefits and possible pitfalls of using information and communication technology (ICT) in conventional farming. Information technology (IT), the Internet of Things (IoT), and robotics are discussed, along with the roles of Machine learning (ML), Artificial intelligence (AI), and sensors in farming. Drones are also being studied for crop surveillance and yield optimization management. Global and state-of-the-art Internet of Things (IoT) agricultural platforms are emphasized when relevant. This article analyse the most current publications pertaining to precision agriculture using ML and AI techniques. This study further details about current and future developments in AI and identify existing and prospective research concerns in AI for agriculture based on this thorough extensive literature evaluation.