• Transactions of Materials Processing
• /
• v.26 no.6
• /
• pp.356-364
• /
• 2017

In this study, submerged arc cladded Fe-Cr-Ni-Mo-CuWNbV-C stainless steels containing various Cr contents between 11.2 wt.% and 16.7 wt.% were prepared with fixed C content at about 0.14 wt.%. Using these alloys, changes in microstructure, tensile property, and thermal fatigue property were investigated. Phase fraction of delta-ferrite was increased gradually with increasing Cr content. However, tensile strength, hardness, and thermal fatigue resistance appeared to be decreased. When the microstructure of delta-ferrite was observed, it was revealed that the mesh structure retained up to about 15% Cr content. Although thermal fatigue resistance was almost the same for Cr contents between 11.0 and 14.5 wt.%, it was significantly decreased at higher Cr contents. This was evident from mean value of crack lengths of 10 largest ones. Evaluation of thermal fatigue resistance on alloys with various Cr contents revealed the following important results. First, the reproducibility of ranking test was excellent regardless of the number of cycles. Second, thermal fatigue resistance was increased in proportion to true tensile fracture strength values of overlay materials. Finally, the number of thermal fatigue cracks per unit length was increased with increasing true tensile fracture strength.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.71-78
• /
• 2006

The image of an object obtained by the radar is not corresponding to its true shape, because the image of an object observed by the radar is receiving an influence such as multiple-reflections and expanded in bearing because of the beam width of a radar. In addition, a radio wave does not hit the entire surface of an object. Therefore, the image of the front side of a ship facing a radar antenna corresponds to its true shape. In this paper, a method to estimate a ship's shape by means of the integration of the front parts of images obtained from radars is proposed. In addition, a matter, which is observation error of each radar, in using multi-radars, and the process included in the proposed method for solving the matter, are described. As a result of the experiment, the accuracy of about 3 degrees in ship's heading and about 14 meters in length and about 9 meters in beam was obtained.

• The korean journal of orthodontics
• /
• v.23 no.3 s.42
• /
• pp.295-309
• /
• 1993

The purpose of this study was to investigate the effect of jaw growth in a growing rabbits, when they are subjected to refractive force and after removal of refractive force. The experimental animals were Oryctolagus couniculus, male rabbits of 4 weeks of age. The mandible is retracted with 200gm in force of each side to the posterior and superior direction for 14 hours a day. Then rabbits were used as control group. First experimental group received refractive force for 4 weeks. Second experimental group received for 8 weeks. Third experimental group received for 12 weeks. True lateral films and dorso-ventral films were taken before wearing appliances, 4 weeks, 8 weeks, 12 weeks and 16 weeks after wearing appliance. The changes of rabbits jaw growth were observed radiographically. The findings were as follows : 1. Mandibular refractive force decreased total mandibular length, mandibular condylar length and angular length. 2. Mandibular refractive force increased nasal height, condylar width and angular width. 3. Mandibular refractive force decreased mandibular lenght growth but increased mandibular width growth. 4. There is no phenomena of catch-up growth after refractive force removal.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.80-85
• /
• 1995

Too see the effects of finite record on the estimation of WVD in practice, a window which has time varying length is examined. Its length increases linearly with time in the first half of the record, and decreases from the center of the record. The bias error due to this window decreases inversely proportionally to the window length as time increases in the first half. In the second half, the bias error increases and the resolution decreases as time increases. The bias error due to the smoothing of WVD, which is obtained by two-dimensional convolution of the true WVD and the smoothing window, which has fixed lengths along time and frequency axes, is derived for arbitrary smoothing window function. In the case of using a Gaussian window as a smoothing window, the bias error is found to be expressed as an infinite summation of differential operators. It is demonstrated that the derived formula is well applicable to the continuous WVD, but when WVD has some discontinuities, it shows the trend of the error. This is a consequence of the assumption of the derivation, that is the continuity of WVD. For windows other than Gaussian window, the derived equation is shown to be well applicable for the prediction of the bias error.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.6
• /
• pp.557-562
• /
• 2002

This study was to estimate population growth parameters of the freshwater bivalve, Corbicula (Corbiculina) papyacca (Heude) in Korea. Samples were collected from Jojong stream in Chungpyeong from September 1999 to August 2000. Ages were determined from the ring of shell, The shell length of the samples ranged from 4,2 mm to 28.1 mm, The ring on the surface of shell was formed once a year from January to March, Marginal increment analysis of shell rings indicated that annuli were formed in June. Spawning period was estimated to be May to August with a peak between June and July through fatness analysis, and thus rings were considered to be true annual marks. Von Bertalanffy's growth parameter were estimated from a nonlinear method with the value of logical maximum shell length ($L_{propto}$) was 34,36 mm, K was 0.1531/year, logical age of shell length 0 ($t_{0}$) was -0,5246 year, and logical maximum total weight ($W_{propto}$) was 11.42 g.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.9
• /
• pp.969-974
• /
• 2001

Model calculations for small molecules Li2, F2, LiF and BF have been performed at the Dirac-Fock level of theory using Dirac-Coulomb and Dirac-Coulomb-Magnetic Hamiltonians with various basis sets. In order to understand what may happen when the relativity becomes significant, the value of c, speed of light, is varied from the true value of 137.036 a.u. to 105 (nonrelativistic case) and also to 50 and 20 a.u. (exaggerated relativistic cases). Qualitative trends are discussed with special emphasis on the effect of the magnetic part of the Breit interaction term. The known relativistic effects on bonding such as the bond length contraction or expansion are demonstrated in this model study. Total energy, $\pi-orbital$ splitting, bond length, bond dissociation energy and dipole moment are calculated, and shown to be modified in a uniform direction by the effect of the magnetic term. Inclusion of the magnetic term raises the total energy, increases the bond length, reduces the $\pi-orbital$ splitting, increases the bond dissociation energy, and mitigates the changes in dipole moment caused by the Dirac term.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.263-274
• /
• 2018

In this study, the applicability and external/internal stability of a MSEW abutment with a slab were investigated. Structural analysis of slab bridges between 10 ~ 20.0 m and thicknesses of 0.7 ~ 0.9 m was carried out to calculate the reaction forces due to dead and live loads acting on the bridge supports. The slab bridge with a length of 20.0 m satisfied the allowable contact pressure of 200 kPa for the true MSEW abutment. Because the external stability of the true MSEW abutment was dominated by the geometry of the MSE wall, the change in the factor of safety due to the load of the super-structure is small. Because the stiffness of the foundations is fixed and the load of the super-structure is increased, the factor of safety of the bearing capacity was reduced. As the load of the super-structure was increased, the horizontal earth pressure of the true MSEW abutment increased greatly. As a result, the pullout and fracture of the uppermost reinforcement, which are the factors of safety, did not meet the design criteria. Therefore, it is necessary to increase the pullout resistance and the long-term allowable tensile force of the reinforcement placed on the top of the reinforced soils to ensure efficient design and performance of a true MSEW abutment.

• Plant Resources
• /
• v.7 no.1
• /
• pp.29-35
• /
• 2004

Root chicory (Cichorium intybus L. var. sativus) is potential alternative medicinal and sugar crop which accumulates a high amount of linear polyfructan, inulin in its roots. A problem in root production is that over-wintered stock plants often flower. Once the plant becomes reproductive, stem elongation and root growth slows and floral buds arise from every node, rendering the plants useless for propagation. The objectives of this research was to examine the effectiveness of manipulating environmental factors containing photoperiod, temperature and number of leaf states. The experiment was performed in growth chamber to create two photoperiods (8 h, and 16 h) with three temperature regimes (5$^{\circ}C$/3$^{\circ}C$, 1$0^{\circ}C$/8$^{\circ}C$ and 15$^{\circ}C$/13$^{\circ}C$ day/night temperature) for a total of six treatments on three type of true-leaf stage of plant. Data of bolting rate, shoot and root length, shoot and fresh weight was invetigated in each treatments. This is the first report on changes in bolting rate and shoots and roots production during a whole growing season and differences in the effect of cold and photoperiod treatment depending on the true-leaf stage of plant.

• Journal of the Korean Society of Costume
• /
• v.52 no.2
• /
• pp.103-113
• /
• 2002

Heungdukwang'(興德王) costume ordinance(834A.D.) is a very important written historical record because it reveals Tongil Shills's(統一新羅) costume. But among the clothing pieces that appeared in Heundukwang'(興德王) costume ordinance, classification of Naeoe(內衣) and Danoe(短衣) is not clear. This study focuses on the categorization of Naeoe(內衣) and Danoe(短衣). Upper garments included among costume ordinance were Pyooe(表衣), Naeoe(內衣) and Danoe(短衣), Pyooe(表衣) and aeoe(內衣) were unisex, while Danoe(短衣) was worn only by women excluding the lower class. Pyooe(表衣) is applicable to Po(袍), Naeoe(內衣) is aplicable to Yu(유). Shilla'(新羅) upper garments appearing in visual records are as follows: -With the exception of Pyooe(表衣), the length of men's upper garments were between hip and knee length. These upper garments featured V-neck and round neck styles with the left side of the garments folded over the right side. -Again excluding Pyooe(表衣), women's upper garments were similar to men's upper garments having V-neck and round necklines. We know this to be true from the relics found during the excavations of Hwangsungdong and Yonggangdong, as well as from the women in the stone reliefs of Sangju. Although we know the shape of necklines. the length of upper garments remained a mystery because women of that tome tucked in their upper garments into the skirts and/or wore an over garment. However a clay doll found around Bulguksa(佛國寺) wearing a knee length garment with V-neck. The upper garment was opened in the front and was worn over another garment with same length and round neckline. At that time, The upper garments found in China and Japan. were not much different than those found in Shilla (新羅). They also included garments that were waist length, had peach-shaped necklines, or were worn over head. Shilla's(新羅) traditional upper garment was between hip and knee length, but with the introduction and influence of Chinese costume. upper garments with a length coming down to the high waist line began to appear. In addition to Chinese influence, because Shilla's(新羅) women wore the upper garment first and then the lower garment, a long upper garment was not necessary. These shorter upper garments came to be known as 'Danoe(短衣)'When we perceive clothing. we look at silhouette first and then the details. Silhouette is much determined by length and neckline or the front of the garment determines the details, So we need to attention to the basis of ancient dress classifications. These classifications were according to first length [Po(袍), Yu(유)] and then neckline [Danryoung(團領), Jingryoung(首領)]. As a result. Naeoe(內衣) and Danoe(短衣) are classified by the length. The length (內衣) was between hip and knee length while Daneoe(短衣) was waist length. Danoe(短衣) was worn by putting the bottom of it inside skirt naeoe(內衣) was worn over a skirt or plant. But both had V-neck and round neck styles, and styles with the left side of the garments folded over the right side.

• Journal of Biosystems Engineering
• /
• v.19 no.1
• /
• pp.9-16
• /
• 1994

135 and 136 pine cones were sampled from age class of II to VI Korean pine trees for the study of their physical properties in 1991 and 1992, respectively. The length, width, weight, volume, and the largest projected area of cones were measured, and the specific gravity, apparent volume ratio sphericity, and roundness were calculated. Regression analysis were performed for the weight, volume, and projected area to the cone length and width. The length, and major and minor diameters of the cone stalks were measured and analyzed. 1. The range of the length of cone stalks was 0 to 47.3mm. The average length of stalks were 9mm ('91) and 10mm('92), respectively. Cross section of the stalks was ellipse with average major and minor diameters of 9.1mm and 10.1mm, and 8.6 and 8.7mm in 91 and 92, respectively. 2. The length of pine cones distributed from 8cm to 17cm and the average length were about 13cm('91, '92). The width varied from 5cm to 9.5cm and the average width were 6.7cm('91) and 6.9cm('92). The ratios of the length to the width were 0.56('91) and 0.65('91) and the shape of the cones were found to be ellipse with minor diameter of 1/2 to 2/3 of the major diameter. 3. The roundnesses and sphericity of cones were 0.74 and 0.75('91), 0.63 and 0.67('92), respectively. The average of the largest projected area of cones were $85.3cm^2$('91) and $93.1cm^2$('92) and the criterion areas were $71.0cm^2$ and $74.5cm^2$, respectively. 4. Cone weights were from 83g to 467g('91 and '92) and averages were 186g('91) and 220g('92). The average specific gravities were 0.89 and 0.96('91 and '92). The true volumes were $212cm^2$('91) and $230cm^2$('92), and the average bulk volume was $321cm^2$('91, '92). The average apparent volume ratios of cones were 35% ('91) and 28% ('92), respectively. 5. The weight and the volume were proportional to the length of the cone multiplied by the width squred and the largest projected area was proportional to the length multiplied by the width of cones.