• Journal of the Korean GEO-environmental Society
• /
• v.12 no.10
• /
• pp.23-28
• /
• 2011

This study was conducted to investigate the adsorption characteristics of various surfactants including biosurfactant, SWA 1503, Triton X-100 and sodium dodecyl sulfate(SDS) on soil. The Freundlich adsorption isotherm equation was found to be the best to describe experimental results. The amount of adsorbed surfactant on soil increased as the content of clay increased. The results showed that surfactant was adsorbed mainly on the surface and the pores of soil since the surface area of clay was larger than that of sand. The amount of adsorbed surfactants on soil was as follows: Biosurfactant > SWA 1503 > Triton X-100 > SDS.

• Journal of Animal Reproduction and Biotechnology
• /
• v.36 no.4
• /
• pp.253-260
• /
• 2021

Organ transplantation is currently the most fundamental treatment for organ failure, but there is a shortage of organ supply compared to those in need. Regenerative medicine has recently developed a decellularization technique that overcomes the limitations of conventional organ transplantation and attempts to reconstruct damaged tissues or organs to their normal state. Several decellularization methods have been suggested. In this experiment, the decellularization methods were used to find effective decellularization methods for humanlike porcine placenta. The optimal conditions for decellular support are low DNA content and high glycos amino glycans (GAGs) and collagen content. In order to satisfy this condition, SDS and Triton X-100 and SDS + Triton X-100 were used as the detergent used for decellularization in this experiment. The contents were compared according to the decellularization time (0, 12, 24, 48 and 72 hours), and the concentrations of SDS (0.2, 0.5, 0.7 and 1.0%) were mixed in 1.0% Triton X-100 to analyze the contents. When decellularized using SDS and Triton X-100, respectively, it was confirmed that the contents of DNA and GAGs were opposite to each other. And decellularization treatment for 24 hours at 0.5% SDS was able to obtain an effective decellular support. If decellularization studies of various detergents can be obtained an effective decellular support, and furthermore, cell culture experiments can confirm the effect on the cells.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.3
• /
• pp.358-363
• /
• 2008

The intracytoplasmic sperm injection (ICSI) procedure has recently been utilized to produce transgenic animals and may serve as an alternative to the conventional pronuclear microinjection in species such as pigs whose ooplasm is opaque and pronuclei are often invisible. In this study, the effects of sperm membrane disruption and electrical activation of oocytes on in vitro development and expression of transgene green fluorescent protein (GFP) in ICSI embryos were tested to refine this recently developed procedure. Prior to ICSI, sperm heads were treated with Triton X-100+NaCl or Triton X-100+NaCl+NaOH, to disrupt membrane to be permeable to exogenous DNA, and incubated with linearized pEGFP-N1 vector. To induce activation of oocytes, a single DC pulse of 1.3 kV/cm was applied to oocytes for $30{\mu}sec$. After ICSI was performed with the aid of a micromanipulator, in vitro development of embryos and GFP expression were monitored. The chemical treatment to disrupt sperm membrane did not affect the developmental competence of embryos. 40 to 60% of oocytes were cleaved after injection of sperm heads with disrupted membrane, whereas 48.6% (34/70) were cleaved without chemical treatment. Regardless of electrical stimulation to induce activation, oocytes were cleaved after ICSI, reflecting that, despite sperm membrane disruption, the perinuclear soluble sperm factor known to mediate oocyte activation remained intact. After development to the 4-cell stage, 11.8 (2/17, Triton X-100+NaCl+NaOH) to 58.8% (10/17, Triton X-100+NaCl) of embryos expressed GFP. The expression of GFP beyond the stage of embryonic genome activation (4-cell stage in the pig) indicates that the exogenous DNA might have been integrated into the porcine genome. When sperm heads were co-incubated with exogenous DNA following the treatment of Triton X-100+NaCl, GFP expression was observed in high percentage (58.8%) of embryos, suggesting that transgenic pigs may efficiently be produced using ICSI.

• Microbiology and Biotechnology Letters
• /
• v.17 no.1
• /
• pp.29-34
• /
• 1989

An intracellular accumulation of cadmium by the intact cell of an extremely cadmium tolerant yeast, Hansenula anomala B-7, was investigated in the presence of Triton X-100. The uptake of cadmium by the intact cell was efficiently enhanced up to approximately 40% or more by 0.1% of Triton X-100 and Aerosol OT, respectively. The Michaelis constant, Km, done by Lineweaver-Burk plot of accumulation velocity of cadmium vs. cadmium concentration was calculated to be 0.247mM. The optimal conditions of pH and the temperature for the effective cadmium uptake were from neutrality to alkali and 4$0^{\circ}C$, respectively. The accumulation of cadmium was increased approximately 3 times under the shaking incubation, with no correlation to shaking rate. By zinc the cadmium accumulation was decreased.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.524-529
• /
• 2015

This study was conducted to optimize the medium composition for cold-adaptive protease production of Enterobacteriaceae sp. by response surface methodology (RSM). Yeast extract, and TritonX-100 were identified as the significant factors affecting protease from one-factor-at-a-time method. RSM studies for optimizing protease production of Enterobacteriaceae sp. have been carried out for three parameters including yeast extract concentration, TritonX-100 concentration, and culture pH. These significant factors were optimized as 6.690 g/L yeast extract, 0.018 g/L Triton$^{TM}$ X-10, and pH 6.677. The experimentally obtained protease activity was 8.03 U /L, and it became 1.5-fold increase before optimization.

• Microbiology and Biotechnology Letters
• /
• v.24 no.6
• /
• pp.712-716
• /
• 1996

The effects of non-ionic surfactants (Triton X-100 and Tween 80) on cloned glucoamylase production and secretion in recombinant Saccharomyces cerevisiae culture were studied. Even though the extracellular glucoamylase activity was increased by addition of Tween 80 due to the increase of the cell mass, Tween 80 did not play a role in the increase of glucoamylase secretion. On the addition of Triton X-100 addition, the secretion efficiency was increased while the cell growth was inhibited. Triton X-100 was added to the culture broth after 24 hr of culture to minimize the inhibition of the cell growth, and consequently the glucoamylase activity in the culture broth was increased by 12%.

• Korean Journal of Microbiology
• /
• v.24 no.4
• /
• pp.370-376
• /
• 1986

From the outer membrane portion of Gram-negative Klebsiella pneumoniae, the activity of 2-furaldehyde dehydrogenase depending upon beta-nicotinamide adenine dinucleotide was detected. Cytoplasmic membrane was preferentially extracted from crude membrane with $Mg^{2+}$ and Triton X-100, and then outer membrane was collected by ultracentrifugation. The crude enzyme was obtained by solubilization of outer membrane with lysozyme, ethylene diamine tetraacetate and Triton X-100. Thereafter 2-furaldehyde dehydrogenase was partially purified through column chromatography on QAE-Sephadex Q-50 and Sephadex G-150 and the enzyme activity was analyzed by means of high performance liquid chromatography. The optimal pH for the activity of the enzyme was about 9.5 and the optimal temperature was about $85^{\circ}C$. The partially purified enzyme retained tis activity at $85^{\circ}C$ for 5 hours. The optimal concentration of Triton X-100 for the activity of the enzyme was about 1.5% in the reaction mixture.

• Membrane Journal
• /
• v.22 no.3
• /
• pp.224-233
• /
• 2012

To improve permeation performance of gas separation membrane, polysulfone hollow fiber membrane was prepared by wet-dry phase inversion method using Triton X-100 as non-ionic additive. And variation of gas permeation behavior by additive was investigated. Various spinning conditions such as air gap, concentration of polymer, dope tank temperature were controlled and these effects were studied. The morphology and gas permeation property of hollow fiber membranes were investigated using scanning electron microscope (SEM) and bubble flow meter respectively. We confirmed that the membranes added with Triton X-100 had a smooth external skin at various air gap length conditions. The macrovoids of these hollow fiber membranes were more developed with increase of air-gap from 4 to 90 cm and that induced higher permeance. The permeance of polysulfone membranes has the higher value at comparatively lower concentration polymer (30 wt% polysulfone) and lower concentration of additive (15 wt% Triton X-100). When temperature in dope tank was controlled, the membranes prepared at $100^{\circ}C$ showed low permeance because of volatilization of additive and solvent.

• Journal of the Korean Chemical Society
• /
• v.41 no.6
• /
• pp.284-291
• /
• 1997

The critical micelle concentrations($CMC^*$) of a cationic surfactant cetylpyridinium chloride (CPC) and a nonionic surfactant triton X-100(TX-100) in aqueous solutions of n-alcohols(methanol, ethanol, 1-propanol, 1-butanol and 1-pentanol) were determined by UV spectroscopic method at 25$^{\circ}C$. The various thermodynamic values in 0.1 M n-alcohols were calculated by means of the equation derived from the pseudo-phase separation model and compared with the values in the absence of n-alcohols. The results were a good agreement with the nonideal mixed micelle model, and they showed negative deviation from the ideal behavior.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.293-295
• /
• 2002

The structural stability of bacteriorhodopsin (bR) solubilized by Triton X-100 (TX-100) was studied by measuring the denaturation kinetics in the dark and under illumination, and compared with the structural stability of bR solubilized by octyl-${\beta}$-glucoside (OG). In the dark, bR solubilized by TX- 100 was more stable than bR solubilized by OG. Under illumination, bR solubilized by TX-100 showed light-induced denaturation in the same manner as bR solubilized by OG. These results in the dark well correlated with the experimental results of the visible CD band. Although solubilized bR in the TX-100 concentration range of 2-50 mM showed almost identical positive CD band and did not denature in the dark at 35$^{\circ}$C, the kinetic constant of the photobleaching increased with the increase of TX-100 concentration. These results suggested that photo-intermediates of solubilized bR are destabilized by TX-100 micelles.