• 분석과학
• /
• 제17권1호
• /
• pp.69-81
• /
• 2004

한강과 낙동강에서 채취한 원수에 염소소독제인 hypochlorite를 $10{\mu}g/mL$의 농도로 투여한 후 1시간 ~ 14일까지 TOC (total organic carbon), 잔류염소량 및 14종의 염소소독부산물 생성율을 조사하였다. 그 결과 TOC 및 탁도는 큰 차이가 없었으며 잔류염소량은 한강에서 투여 후 1시간 경과 시 $6{\mu}g/mL$ 이상에서 14일째에 $1.23{\mu}g/mL$으로 감소한 반면 낙동강의 경우 3일 이후 거의 존재하지 않았다. 7일 후 발생한 총 소독부산물의 농도는 한강의 경우 101.3 ng/mL (789.6 nM)이며 이 중 THMs (trihalomethanes)가 68%로 가장 큰 비중을 차지하였다. 그 외에 HAAs (haloacetic acids, 19%), chloral hydrate(10%)가 검출되었으며, 낙동강의 경우 총 소독부산물의 농도가 98.4 ng/mL (678.6 nM)이며 이 중 HAAs가 57%로 가장 큰 비중을 차지하였다. 그 외에 THMs (34%), HANs (haloacetonitriles, 5%) 및 chloropicrin등 질소화합물의 농도가 증가하였다. 이는 낙동강의 경우 한강에 비해 상대적으로 많이 포함된 암모니아성 질소가 소독제인 염소와 반응하여 클로라민을 생성함으로써 염소에 의한 소독효과와 클로라민에 의한 소독효과를 함께 나타내기 때문인 것으로 사료되며 전체적인 소독부산물들의 생성비율 경향을 살펴보면 소독제의 종류에 따라 소독부산물의 생성패턴에 차이가 있으나 산성도가 큰 HAAs의 초기 생성농도가 높고 점차 THMs의 생성속도가 증가하였다.

• Journal of Preventive Medicine and Public Health
• /
• 제22권4호
• /
• pp.495-505
• /
• 1989

This study was conducted as a nationwide survey In Korea to determine the THM (trihalomethane) concentration levels in the drinking water of 14 selected cities. The survey was underdtaken in one city (Kwangju) during September and October of 1988 and 14 cities in January through February of 1989. The results were as follows : 1. The $KMnO_4$ consumption was 10.6mg/l-11.6mg/l in Pusan and Ulsan, exceeding the drinking water standard of 10mg/l. Pusan, Inchon, Kwangju, Ulsan, Mokpo and Junju areas also exceeded the ammonia nitrate standard of 0.5mg/l. Other tap waters surveyed were detected below the drinking water standards. 2. The THM concentrations of tap water measured in January and February of 1989 were detected in the range $1.20{\mu}g/l-150.8{\mu}g/l$. 3. In the comparative study of the THM concentration of tap water measured in the Kwangju area during September and October of 1998, the average THM concentation of $145.63{\pm}70.72{\mu}g/l$ showed a sixfold increase compared to that of $23.8{\pm}8.31{\mu}g/l$ surveyed in January and February 1989. 4. The proportion of the four THM compounds found in tap water was bromoform, 47% ; chloroform, 30% ; chlorodibromomethane, 13% ; and dichlorobromomethane, 10%. 5. Since the results indicate that the concentration of bromoform was 2-10 times higher than that of chloroform measured in the seaside district of Pusan, Ulsan and Cheju Island, it is reasonable to assume that the raw water was somehow Influenced by seawater. 6. The average lifetime cancer rate of the population exposed to chloroform measured in the surveyed areas was 17 cancer incidences per 1 million population. From the above results, the existence of THM in the distribution systems seems to be inevitable, since chlorine disinfection is performed in water treatment plants In our country. There seems to be a trend of increasing. THM cncentrations due to the contamination of raw water. In order to establish my form of regulations, health risk assessment is an imminent subject.

• Environmental Engineering Research
• /
• 제12권5호
• /
• pp.224-230
• /
• 2007

The objectives of this study were to evaluate the change of molecular weight (MW) profiles in natural organic matter (NOM) through various treatment processes (coagulation, granular activated carbon (GAC), and ozonation) using high performance size exclusion chromatography based on ultraviolet absorbance and dissolved organic detection (HPSEC-UVA-DOC). In addition, relationships between MW profiles and disinfection by-production (DBP) formation were evaluated. Each treatment process results in significant different effects on NOM profiles. Coagulation is effective to remove high molecular weight NOM, while GAC is effective to remove low molecular weight NOM. Ozonation removes only a small portion of NOM, while it induces a significant reduction of UV absorbance due to breakdown of the aromatic groups. All treated waters are chlorinated, and chlorination DBPs such as trihalomethanes (THMs) and haloacetic acids (HAAs) are measured under formation potential conditions. Both THM and HAA formation potentials were significantly reduced through the coagulation process. GAC was more effective to reduce THM formation compared to HAA formation reduction, while ozonation showed significant HAA reduction compared to THM reduction.

• 상하수도학회지
• /
• 제20권1호
• /
• pp.27-34
• /
• 2006

This study was conducted to evaluate the performance of a membrane bioreactor filled with high concentration of powdered activated carbon (HCPAC-MBR) to reduce DBPs at the drinking water treatment. The pilot system was installed after the rapid sand filtration process whose plant was the conventional treatment process. The removal efficiencies of DBPs were measured during pilot operation period of 2 years. HAA and THM removal rates could be maintained around 80~90% without any troubles and then tremendous reduction of HAA and THM reactivity were observed more than 52%. The average removal rate of HAA formation potential (FP) and THM formation potential (FP) were 70.5% and 67.6% respectively. It is clear that the PAC membrane bioreactor is highly applicable for advanced water treatment to control DBPs.

• 상하수도학회지
• /
• 제18권5호
• /
• pp.628-637
• /
• 2004

In many drinking water treatment plants, chlorination process is one of the main techniques used for the disinfection of water. This disinfecting treatment leads to the formation of disinfection by-products (DBPs) such as haloacetonitriles (HANs), trihalomethanes (THMs), haloacetic acids (HAAs). In this study, headspace-solid phase microextraction (HS- SPME) technique was applied for the analysis of HANs in drinking water. The effects of experimental parameters such as selection of SPME fiber, the addition of salts, magnetic stirring, extraction temperature, extraction time and desorption time on the analysis were investigated. Analytical parameters such as linearity, repeatability and detection limits were also evaluated. The $50/30{\mu}m$-divinylbenzene/carboxen/polydimethylsiloxane fiber, extraction time of 30 minutes, extraction temperature of $20^{\circ}C$ and desorption time of 1 minute at $260^{\circ}C$ were the optimal experimental conditions for the analysis of HANs. The correlation coefficients ($r^2$) for HANs was 0.9979~0.9991, respectively. The relative standard deviations (%RSD) for HANs was 2.3~7.6%, respectively. Detection limits (LDs) for HANs was $0.01{\sim}0.5{\mu}g/L$, respectively.

• 한국환경과학회지
• /
• 제14권10호
• /
• pp.965-972
• /
• 2005

This research studied the effect of factors that are able to form disinfection by-products (DBPs) of chlorination, including natural organic matter (NOM) with sewage, bromide ions, pH and contact time. Trihalomethane (THMs) yield of $0.95{\mu}mol/mg$ was higher than other DBPs yield for the chlorinated humic acid samples. THMs yield of sewage sample was $0.14{\mu}mol/mg$ and haloacetonitriles (HANs) yield in the sewage samples were $0.13{\mu}mol/mg$ but only $0.02{\mu}mol/mg$ for the humic acid samples. As the concentration of bromide ions increased, brominated DBPs increased while chlorinated DBPs decreased, because bromide ions produce brominated DBPs. THMs were highest $(55.55{\mu}g/L)$ at a pH of 7.9 and haloacetic acids (HAAs) were highest $(34.98{\mu}g/L)$ at a pH of 5. Also THMs increased with increasing pH while HAAs decreased with increasing pH. After chlorination, the rate of THMs and HAA formation are faster at initial contact time and then reaches a nearly constant value after 24 hours. This study considers ways to reduce DBP formation by chlorination.

• 환경위생공학
• /
• 제7권2호
• /
• pp.83-94
• /
• 1992

Recently water demand is increasing as the industry prospers. The increase of water demand is followed by the increase of wastewater discharge which pollutes rivers and ground water extensively. These rivers, reservoirs and ground water are sources for drinking water and their contamination affects the quality of water supply and other potable water. In Korea there are 776 water treatment plants which supply drinking water from main rivers or reservoirs. Rivers are the biggest water source for drinking water is being contaminated, the innovation of treatment process is needed. The construction and operation of water supply facilities is under the control of the Ministry of Construction and the water supply offices of cities and provinces. However, drinking water quality is under the control of the bureau of sanitation in the Ministry of Health and Social Affairs. There are 33 items in drinking water quality standards of Korea. Trihalomethanes, Selenium, Diazinone and other three of pesticides have been included lately, The Ministry of Health and Social Affairs is planning to enhance. the level of $VOC_S$(Vola-tile Organic Compounds) standard. Drinking water quality standard is the goal to protect the quality of supply water and ground water. In order to protect the source water from domestic or industrial water, technological improvement and adequate investment should be urgently made. The ultimate goal of drinking water quality is safety and health of consumers. The more stringent the standard are, the better the water quality will be. As the drinking water quality standards become more stringent this year, various and positive solutions by the authorities concerned must be prepared.

• 상하수도학회지
• /
• 제19권6호
• /
• pp.713-719
• /
• 2005

SPME (Soild phase microextraction) has been used in the analysis of many volatile organic compounds, such as geosmin and 2-methylisoborneol (2-MIB), trihalomethanes (THMs) in drinking water. SPME fiber is characterized by high adsorption capacity (DVB/CAR/PDMS, DVB/PDMS etc.). Although the highly active adsorption capacities of the SPME fiber are often to the chemical functional group, surface properties play a significant role in determining the surface adsorption capacities. The objectives of this study were to evaluate effect of residual chlorine on analysis of geosmin and 2-MIB. Image taken by SEM before preloaded with chlorine, the surface and porous media was almost perfect spherical shape and no clogging of pores. However, after preloaded with chlorine the surface was aggregated and pore was blocked. The recovery rate of geosmin and 2-MIB coexisting with chlorine was reduced by 35 to 62%. The recovery rate with preloaded with chlorine was reduced by 25 to 43%. The lower concentration of geosmin and 2-MIB and the higher concentration of chlorine existed in water, the lower the recovery rate was.

• 상하수도학회지
• /
• 제30권1호
• /
• pp.69-75
• /
• 2016

This study was conducted to examine the byproducts formation characteristics at the water treatment plants which applying electrolysis as a disinfection process in Gangwondo, Korea. Total of forty plants located in Gangwon Province, Korea were selected for the study. Correlation between dissolved organic carbon(DOC) and $SUVA_{254}$ was not clear. Among the species of the disinfection byproducts(DBPs), chlorate and trihalomethanes(THMs) accounted for 76% and 14% of DBPs, respectively. The effect of DOC or $SUVA_{254}$ on DBPs formation was not clearly demonstrated. The increased amount of THMs due to the raw water bromide content was found primarily in the form of chloroform, and the percent fraction of BDCM(bromodichloromethane) and DBCM(Dibromochloromethnae) was relatively insignificant. When the value of $SUVA_{254}$ was greater than $2L/mg{\cdot}m$, the percent fraction of BDCM and DBCM decreased while percent fraction of CF(chloroform) increased.

• 상하수도학회지
• /
• 제11권4호
• /
• pp.126-132
• /
• 1997

Trihalomethanes (THMs) are formed during the chlorination of waters containing precusors compounds, most commonly humic substances, changes in pH, TOC, temperature, precusor source and concentration chlorine dosage, bromide level and reaction time directly influence trihalomethane formation potential (THMFP) and kinetics. A standard THMFP experiment was conducted for each water under the following conditions ; $20^{\circ}C$, pH 7.4, reaction time of 48hr, TOC 5.7mgC/L. A series of kinetic experiments was conducted for each water to provide THM formation under varying conditions of reaction time, pH, temperature and TOC, chlorine dosage. The resultant mutiple parameter powre function predicts a THM which allows direct calculation of THM, is $[THM]=0.00039(pH-2.81)[TOC][Cl_2]^{0.321}\;t^{0.266}\;T^{0.286}$ Characteristics of raw water in advanced drinking water treatment pilot plant were, TOC levels ran from 4.42~6.84mgC/L, pH 7.2~7.8, temperature $7.0{\sim}18.4^{\circ}C$, UV-254 absorbance $0.057{\sim}0.85cm^{-1}$, THM levels ranged from 0.031~0.049mgC/L.