• Advances in concrete construction
• /
• 제13권3호
• /
• pp.223-231
• /
• 2022

The problem is formulated by applying the Kirchhoff's conception for shell theory. The longitudinal modal displacement functions are assessed by characteristic beam ones meet clamped-clamped end conditions applied at the shell edges. The fundamental natural frequency of rotating functionally graded cylindrical shells of different parameter versus ratios of length-to-diameter and height-to-diameter for a wide range has been reported and investigated through the study with fractions laws. The frequency first increases and gain maximum value with the increase of circumferential wave mode. By increasing different value of height-to-radius ratio, the resulting backward and forward frequencies increase and frequencies decrease on increasing height-to-radius ratio. Moreover, on increasing the rotating speed, the backward frequencies increases and forward frequencies decreases. The trigonometric frequencies are lower than that of exponential and polynomial frequencies. Stability of a cylindrical shell depends highly on these aspects of material. More the shell material sustains a load due to physical situations, the more the shell is stable. Any predicted fatigue due to burden of vibrations is evaded by estimating their dynamical aspects.

• Structural Engineering and Mechanics
• /
• 제86권6호
• /
• pp.731-738
• /
• 2023

This article presents an analytical approach to explore the bending behaviour of of two-dimensional (2D) functionally graded (FG) nanobeams based on a two-variable higher-order shear deformation theory and nonlocal strain gradient theory. The kinematic relations are proposed according to novel trigonometric functions. The material gradation and material properties are varied along the longitudinal and the transversal directions. The equilibrium equations are obtained by using the virtual work principle and solved by applying Navier's technique. A comparative evaluation of results against predictions from literature demonstrates the accuracy of the proposed analytical model. Moreover, a detailed parametric analysis checks for the sensitivity of the bending and stresses response of (2D) FG nanobeams to nonlocal length scale, strain gradient microstructure scale, material distribution and geometry.

• Structural Engineering and Mechanics
• /
• 제90권1호
• /
• pp.1-18
• /
• 2024

The present study conducts a thorough analysis of thermal vibrations in functionally graded porous nanocomposite beams within a thermal setting. Investigating the temperature-dependent material properties of these beams, which continuously vary across their thickness in accordance with a power-law function, a finite element approach is developed. This approach utilizes a nonlocal strain gradient theory and accounts for a linear temperature rise. The analysis employs four different patterns of porosity distribution to characterize the functionally graded porous materials. A novel two-variable shear deformation beam nonlocal strain gradient theory, based on trigonometric functions, is introduced to examine the combined effects of nonlocal stress and strain gradient on these beams. The derived governing equations are solved through a 3-nodes beam element. A comprehensive parametric study delves into the influence of structural parameters, such as thicknessratio, beam length, nonlocal scale parameter, and strain gradient parameter. Furthermore, the study explores the impact of thermal effects, porosity distribution forms, and material distribution profiles on the free vibration of temperature-dependent FG nanobeams. The results reveal the substantial influence of these effects on the vibration behavior of functionally graded nanobeams under thermal conditions. This research presents a finite element approach to examine the thermo-mechanical behavior of nonlocal temperature-dependent FG nanobeams, filling the gap where analytical results are unavailable.

• 한국소음진동공학회논문집
• /
• 제11권5호
• /
• pp.89-100
• /
• 2001

The Ritz method Is applied In a three-dimensional (3-D) analysis to obtain accurate frequencies for thick. linearly tapered. annular plates. The method is formulated for annular plates haying any combination of free or fixed boundaries at both Inner and outer edges. Admissible functions for the three displacement components are chosen as trigonometric functions in the circumferential co-ordinate. and a1gebraic polynomials in the radial and thickness co-ordinates. Upper bound convergence of the non-dimensional frequencies to the exact values within at least four significant figures is demonstrated. Comparisons of results for annular plates with linearly varying thickness are made with ones obtained by others using 2-D classical thin place theory. Extensive and accurate ( four significant figures ) frequencies are presented 7or completely free. thick, linearly tapered annular plates haying ratios of average place thickness to difference between outer radius (a) and inner radius (b) radios (h$_{m}$/L) of 0.1 and 0.2 for b/L=0.2 and 0.5. All 3-D modes are included in the analyses : e.g., flexural, thickness-shear. In-plane stretching, and torsional. Because frequency data liven is exact 7o a\ulcorner least four digits. It is benchmark data against which the results from other methods (e.g.. 2-D 7hick plate theory, finite element methods. finite difference methods) and may be compared. Throughout this work, Poisson\`s ratio $\upsilon$ is fixed at 0.3 for numerical calculations.s.

• 한국정보통신학회논문지
• /
• 제13권4호
• /
• pp.727-736
• /
• 2009

본 논문에서는 모바일 벡터 그래픽 가속기용 역코사인 연산 회로를 설계하였다. 모바일 그래픽스 응용은 기존 데스크 톱 컴퓨터에 비해 면적, 연산 시간, 전력 소모와 정밀도 측면에서 제약이 크다. 설계한 역코사인 함수 회로는 연산시간과 정밀도 조건을 만족하기 위해 IEEE 표준 부동 소수점 데이터 형식을 사용하며, 계수 테이블을 사용하는 2차 다항식 근사 기법을 채택하였으며, 하드웨어 공유 기법을 통해 면적을 감소시켰다. 역코사인 회로는 약 15,280개의 게이트로 구성되며, $0.35{\mu}m$ CMOS 공정 조건에서 약 125 Mhz의 동작 주파수를 가진다. 7개의 클록 사이클에 역코사인 함수를 구현하므로, 설계된 회로는 약 17.85 MOPS의 연산 성능을 갖고 있어서 OpenVG 프로세서에 적용이 가능하다. 또한 융통성 있는 구조 특성으로 설계된 회로는 ROM 내용의 교체와 속규모의 하드웨어 변경을 통해 지수함수, 삼각함수, 로그 함수와 같은 다른 초월함수에 적용이 가능하다.

• 대한수학교육학회지:학교수학
• /
• 제15권1호
• /
• pp.159-177
• /
• 2013

본 연구는 최근 중요성이 부각되고 있는 STEAM 교육의 사례 연구로서 STEAM에 적합한 수업 자료 개발, 교수 학습 방법의 제안, 효과 분석을 통한 STEAM의 가능성 탐색을 목적으로 한다. STEAM 교육의 소재는 수학과 과학이 분리되기 이전의 수학사를 기반으로, 과학(S)은 24절기, 태양의 고도, 천체의 운동, 기술(T)은 그래픽 계산기를 이용한 탐구, 공학(E)은 해시계의 설계 원리 탐구 및 제작, 예술(A)은 수학사 문헌 탐구 및 수학의 심미적 가치에 대한 이해, 수학(M)은 삼각함수와 관련된다. 또한 STEAM의 특성과 문헌 연구를 토대로 프로젝트기반학습이 STEAM 교육에 적합할 것으로 보고 융합적 프로젝트기반학습을 설계하여 STEAM PBL이 융합적 지식 형성과 수학적 가치를 포함하는 수학적 태도와 21세기 역량 신장에 효과적인지에 중점을 두어 분석하였다. 수업을 분석한 결과, 학생들이 팀원 간의 협력, 의사소통과 표현, 비판적 사고를 토대로 문제해결을 하는 모습이 많이 포착되었으며, 수업을 통해 수학적 가치를 포함한 수학적 태도가 긍정적인 방향으로 변화된 것으로 나타났다.

• Steel and Composite Structures
• /
• 제29권3호
• /
• pp.379-389
• /
• 2018

In this research, the explicit closed-form local buckling solution of steel plates in contact with concrete, with both loaded and unloaded edges elastically restrained against rotation and subjected to eccentric compression is presented. The Rayleigh-Rize approach is applied to establish the eigenvalue problem for the local buckling performance. Buckling shape which combines trigonometric and biquadratic functions is introduced according to that used by Qin et al. (2017) on steel plate buckling under uniform compression. Explicit solutions for predicting the local buckling stress of steel plate are obtained in terms of the rotational stiffness. Based on different boundary conditions, simply yet explicit local buckling solutions are discussed in details. The proposed formulas are validated against previous research and finite element results. The influences of the loading stress gradient parameter, the aspect ratio, and the rotational stiffness on the local buckling stress resultants of steel plates with different boundary conditions were evaluated. This work can be considered as an alternative to apply a different buckling shape function to study the buckling problem of steel plate under eccentric compression comparing to the work by Qin et al. (2018), and the results are found to be in consistent with those in Qin et al. (2018).

• 전기학회논문지P
• /
• 제55권3호
• /
• pp.141-145
• /
• 2006

The line current problem(2-dimensional space : point source) is not easy to analyze the magnetic field using the standard finite element method(FEM), such as overhead trolley line or transmission line. To supplement such a defect this paper is proposed the coupling scheme of analytical solution and FEM. In analysis of the magnetic field using the standard FEM. If the current region is a relatively small compared to the whole region. Therefore the current region must be finely divided using a large number of elements. And the large number of elements increase the number of unknown variables and the use of computer memories. In this paper, an analytical solution is suggested to supplement this weak points. When source is line current and the part of interest is far from line current, the analytical solution can be coupling with FEM at the boundary. Analytical solution can be described by the multiplication of two functions. One is power function of radius, the other is a trigonometric function of angle in the cylindrical coordinate system. There are integral constants of two types which can be established by fourier series expansion. Also fourier series is represented as the factor to apply the continuity of the magnetic vector potential and magnetic field intensity with tangential component at the boundary. To verify the proposed algorithm, we chose simplified model existing magnetic material in FE region. The results are compared with standard FE solution. And it is good agreed by increasing harmonic order.

• 한국학교수학회논문집
• /
• 제1권1호
• /
• pp.151-163
• /
• 1998

In mathematics education, teaching-learning activity can be divided largely into the understanding the mathematical concepts, derivation of principles and laws, acquirement of the mathematical abilities. We utilize various media, teaching tools, audio-visual materials, manufacturing materials for understanding mathematical concepts. But sometimes we cannot define or explain correctly the concepts as well as the derivation of principles and laws by these materials. In order to solve the problem we can use the computer. In this paper, character and movement state of various quadratic function graph types can be used. Using the computers is more visible than other educational instruments like blackboards, O.H.Ps., etc. Then, students understand the mathematical concepts and the correct quadratic function graph correctly. Consquently more effective teaching-learning activity can be done. Usage of computers is the best method for improving the mathematical abilities because computers have functions of the immediate reaction, operation, reference and deduction. One of the important characters of mathematics is accuracy, so we use computers for improving mathematical abilities. This paper is about the program focused on the part of "the quadratic function graph", which exists in mathematical curriculum the middle school. When this program is used for students, it is expected the following educational effect. 1, Students will have positive thought by arousing interests of learning because this program is composed of pictures, animations with effectiveness of sound. 2. This program will cause students to form the mathematical concepts correctly. 3. By visualizing the process of drawing the quadratic function graph, students understand the quadratic function graph structually. 4. Through the feedback, the recognition ability of the trigonometric function can be improved. 5. It is possible to change the teacher-centered instruction into the student-centered instruction. For the purpose of increasing the efficiencies and qualities of mathmatics education, we have to seek the various learning-teaching methods. But considering that no computer can replace the teacher′s role, tearchers have to use the CIA program carefully.

• 대한의용생체공학회:의공학회지
• /
• 제35권6호
• /
• pp.227-233
• /
• 2014

In this paper, to quantitatively evaluate the degree of rehabilitation for the disabled of unilateral lower extremity, we compared the EMG pattern of normal and simulated abnormal gait. The EMG signal was measured at a rate of 1 kHz on the quadriceps and biceps femoris, the pressure sensor was attached to the sole in order to distinguish the gait cycle. Integrated EMG (IEMG) was obtained by the gait cycle, and classified four patterns that were the normal gait pattern, amplitude decrease pattern, reversed pattern, and irregular pattern. For comparison of the patterns, a curve fitting was performed using the trigonometric functions. The result of curve fitting, the method using a variable A that corresponds to the amplitude of the regression curve was able to distinguish the reverse pattern and remaining pattern. The coefficient of determination ($R^2$) representing coincidence of the pattern of the regression curve and EMG was confirmed the biggest value at the normal gait. Therefore, the degree of normal gait can be confirmed using the coefficient of determination. This results show that it is possible to quantitatively confirm the degree of unilateral lower extremity disabled rehabilitation, and it will be contributed to the study of efficient rehabilitation methods by objective analysis.