• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.6
• /
• pp.449-469
• /
• 2011

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering during 2010. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery, and new and renewable energy. Various topics were presented in the field of general thermal and fluid flow. Research issues mainly focused on the thermal reliability of axial fan and compressor in the field of fluid machinery. Studies on the design of ground source heat pump systems and solar chemical reactors were executed in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (3) Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and CO2 were studied. Performance improvement of refrigeration systems are tried applying various ideas of refrigerant subcooling, dual evaporator with hot gas bypass control and feedforward control. The hybrid solar systems combining the solar collection devices with absorption chillers or compression heat pumps are simulated and studied experimentally as well to improve the understanding and the feasibility for actual applications. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. Various studies on heating and cooling systems, HVAC facilities, indoor air environments and energy resources were carried to improve the maintenance and management of building service equipments. In the field of heating and cooling systems, papers on a transformer cooling system, a combined heat and power, a slab thermal storage and a heat pump were reported. In the field of HVAC facilities, papers on a cooling load, an ondol and a drying were presented. Also, studies on HVAC systems using unutilized indoor air environments and energy resources such as air curtains, bioviolence, cleanrooms, ventilation, district heating, landfill gas were studied. (5) In the field of architectural environment and energy, studies of various purposes were conducted such as indoor environment, building energy, renewable energy and green building. In particular, renewable energy and building energy-related researches have mainly been studied reflecting the global interest. In addition, many researches which related the domestic green building certification of school building were performed to improve the indoor environment of school.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.869-877
• /
• 2008

The purpose of this study is to investigate the trends and patterns of variou kind of water uses in a household by metering in Korea. Water use components are classified by toilet, washbowl, bathing, laundry, kitchen, etc. Flow meters are installed in 146 household selected by sampling in all around Korea. The data are gathered by web-based data collection system from the year 2002 to 2006, considering pre-investigated data such as occupation, revenue, family members, housing types, age, floor area, water saving devices, education, etc. Reliable data are selected by upper fence method for each observed water use component and statistical characteristics are estimated for each residential type to determine liter per capita per day. Estimated domestic per capita day show an indoor water use with the range from $150{\ell}pcd$ to $169{\ell}pcd$ for each housing type as the order of high rise apartment, multi-house, and single house. As the order of consuming amount among water use components, it is investigated that toilet($38.5{\ell}pcd$) is the first, and the second is laundry water($30.8{\ell}pcd$), the third is kitchen($28.4{\ell}pcd$), the fourth is bathtub($24.7{\ell}pcd$), the next is washbowl($15.4{\ell}pcd$). The results are compared with water uses in U.K. and U.S. As life style has been changed into western style, pattern of water use in Korea is tend to be similar with the U.S. water use pattern. Compared with the surveying results by Bradley, on 1985. Thirty liter of total use increased with the advancement of economic level, and a little change of water use pattern can be found. Especially, toilet water take almost half part of total water use and laundry water shows lowest as 11% in surveying at the year of 1985. But, this study shows that 39 liter, 28% of toilet water, has been decreased by the spread of saving devices and campaign. It is supposed that the spread large sized laundry machine make by-hand laundry has been decreased and water use increased. Unit water amount of each end-use in household can be applied to design factor for water and wastewater facilities, and it play a role as information in establishing water demand forecasting and conservation policy.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.3
• /
• pp.207-211
• /
• 1996

This study was conducted in the sandy loam soil to find out the effects of fly ash and zeolite applications on saving of irrigation water which was required great quantities during the cultivation days of dry seeded rice. Total water loss was reduced so rapidly in the early growth stage that n was the least in the 18th day after irrigation. After that day it was increasd due to the growth development and the rising temperature. In the daily mean of decreasing water level during the whole irrigation days, control was 47.7mm but the treatments of fly ash and zeolite were 31.8mm and 35.8mm respectively Amounts of the presumed irrigation water of fly ash and zeolite treatments were lower about 29.1% and 20.9%. respectively than that of control during the whole irrigation days These gaps between control and amendment treatments were greater in the early growth stage than in the late stage Hardness, bulk density and the ratio of solid phase in the soil after experiment were the highest in the fly ash treatment and those of control and zeolite treatments were showed the same trends each other. Amounts of water percoration of control and zeolite treatments in the soil were increased 8.2% and 2.6% respectively in comparision with those in the soil after amendment application, but that of fly ash treatment was decreased 42.5%, In contrast to the water percoration of control in the soil after experiment, those of fly ash and zeolite treatments were decreased 76% and 32%.

• Korea journal of population studies
• /
• v.35 no.1
• /
• pp.101-130
• /
• 2012

This study examines mortality change in North Korea and its association with state production and welfare systems. Two main subjects are analyzed. The first theme is to examine the reliability of mortality related data released by North Korea government authorities. Examining inner consistencies among mortality related statistics and comparing with mortality trends in other socialist societies, the study finds that mortality rate was under estimated. Under-estimation of mortality by North Korean authorities is regarded to result not only from political purpose which aims to propagate the regime's superiority but also from enumeration errors of vital statistics based on the residence registration. The second theme is to estimate the change in mortality of North Korean people since the establishment of DPRK, correcting errors of mortality data. Mortality of North Korean people is estimated to have improved largely by the early 1970s, to have been sluggish hereafter, and finally to have increased during the economic hardship period between 1993 and 2008. While large people died during the food crisis in the late 1990s, however the population loss caused by mortality increase was not so great as the proposition of the huge starvation was expected. It is partly because population turbulence occurred not just by mortality increase, rather it has progressed in the joint effects of fertility decline and exodus of North Korean people for food. It is also due to North Korean people's voluntary activities of informal economy. It is also worth noting the high mortality rate of North Korean men. The high mortality of North Korean men is likely due to men's mobilization for long time in army and labor with high risk of accident and their life styles.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.2 s.40
• /
• pp.108-115
• /
• 2005

Gyeonggi metamorphic complex in the Gwangju area include banded biotite gneiss and quartzofeldspathic gneiss. Detailed structural analysis suggests that structural elements in the study area were formed by at least five phase of deformations. Penetrative compositional foliations(S1) formed in the banded gneiss during the first metamorphism and deformation (D1). After intrusion of plutonic rocks, the second deformation (D2) produced S2 foliations in the banded gneiss and quartzofeldspathic gneiss during the second metamorphism. D3 structures are represented by isoclinal folds (F3) whose axial surfaces are parallel to S3 foliations. The N-S oriented shortening (D4) was accommodated by closed upright F4 fold with about 100m of axial surface separation. F4 fold is refolded by regional F5 folding resulting in different orientation and fold style of F4 fold according to the position of F5 fold. The F4 fold with tight interlimb angle is subparallel to the axial surface (north-south) of F5 fold in the core of the F5 fold. In contrast the F4 fold trends northeast in the western limb and northwest in the eastern limb of F5 fold. The interlimb angle is larger in the limbs than that in the core of F5 fold. The trace of foliations is constrained by mainly F4 and F5 folds. Joint fanning around fold is developed in the limbs of F5 fold and bc joints are dominant in the hinge area of F5 fold. A strike-slip fault had developed in tile central part of the study area after F5 folding. The orientation of joint and foliation is rotated anticlockwise about $15^{\circ}$ by the landslide occurred during the Quaternary.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.2
• /
• pp.263-275
• /
• 2012

Jurassic Daebo biotite granites, known as one of the main stone resources in the country, are widely and away distributed in the Pocheon and Yangju areas of the mid Gyeonggi massif. The objects of the study are mainly to reveal the unique characteristics of grain size, rock color, mineral composition, physical property and fracture system from the above biotite granites. Biotite granites from the Pocheon area (PG) and Yangju area (YG) are represented by coarse-grained and light gray, and medium to coarse-grained and grayish to light gray, respectively. In modes, main minerals of Qz+Af+Pl (quartz+alkali feldspar+plagioclase) are more increased in the PG, and accessories of biotite are more increased in the YG, which differences can cause the PG more bright light gray than the YG. Specific gravity (SG) shows somewhat more increasing in the YG than the PG. These differences can be caused by more increasing in biotite contents of higher specific gravity compared to the major minerals in the former than the latter. Absorption ratio (AR) and porosity (PR) of the PG and YG show the same values of 0.33 % and 0.86 %, respectively. In the correlations, PR vs SG and AR vs PR show gradually negative and distinctly positive trends, respectively. Compressive strength (CS) and tensile strength (TS) show increasing in the PG (CS: 1,775 $kg/cm^2$, TS: 87 $kg/cm^2$) than the YG (CS: 1,647 $kg/cm^2$, TS: 79 $kg/cm^2$). These strength characteristics could be attributed to the inherent rock textures of them. Abrasive hardness (AH) also shows a little increasing in PG, which can be caused by increase in quartz contents having higher hardness than the other major minerals. Orientations of fracture sets from the PG and YG were compared with those of vertical rift and grain planes in Mesozoic granites of the country. From the overlapped diagram, the distribution pattern between fracture sets and above vertical planes suggests that microcrack systems developed in Mesozoic granites in Korea occur also in the Daebo biotite granite bodies of the mid Gyeonggi massif. From the relation diagram showing the characteristics of fracture patterns for the above two area, PG and YG may have more potentiality for dimension and non-dimension stone resources, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.103-113
• /
• 2020

Jack-up drilling rigs are widely used in the offshore oil and gas exploration industry. Although originally designed for use in shallow waters, trends in the energy industry have led to a growing demand for their use in deep sea and harsh environmental conditions. To extend the operating range of jack-up units, their design must be based on reliable analysis while eliminating excessive conservatism. In current industrial practice, jack-up drilling rigs are designed using the working(or allowable) stress design (WSD) method. Recently, classifications have been developed for specific regulations based on the load and resistance factor design (LRFD) method, which emphasises the reliability of the methods. This statistical method utilises the concept of limit state design and uses factored loads and resistance factors to account for uncertainly in the loads and computed strength of the leg components in a jack-up drilling rig. The key differences between the LRFD method and the WSD method must be identified to enable appropriate use of the LRFD method for designing jack-up rigs. Therefore, the aim of this study is to compare and quantitatively investigate the differences between actual jack-up lattice leg structures, which are designed by the WSD and LRFD methods, and subject to different environmental load-to-dead-load ratios, thereby delineating the load-to-capacity ratios of rigs designed using theses methods under these different enviromental conditions. The comparative results are significantly advantageous in the leg design of jack-up rigs, and determine that the jack-up rigs designed using the WSD and LRFD methods with UC values differ by approximately 31 % with respect to the API-RP code basis. It can be observed that the LRFD design method is more advantageous to structure optimization compared to the WSD method.

• The Journal of Fisheries Business Administration
• /
• v.26 no.2
• /
• pp.53-74
• /
• 1995

The purpose of this paper is to compare China's and Korea's marine fisheries industries in order to present the main features of China's marine fisheries and show the comparative advantages they have in production. The results indicate that China's marine fisheries have the following features. (1) The marine proportion of the fisheries industry economic activity is less than 60%. Fishing is 71.3% of that marine activity. (2) The production trends of marine fisheries history in China can be classified as follows: 1) an early growth period, 2) a deliberation/consolidation period, 3) a second growth period, 4) a third growth period, and 5) a fourth growth period. The growth rate has rapidly increased recently. (3) Fish production is over 70% of marine fishing fisheries, the next major product is crustacea. The production of shellfish occupies over 70% of marine aquaculture, seaweed production however, is only 22% of total marine aquaculture. (4) The licensed area for marine aquaculture in China is 586.3 ha and that area is 5.4 times larger than that of Korea. The allotted area for shellfish aquaculture is 60% of marine aquaculture, production areas of crustaceans occupy 27.3%, fish has 7 1%, and seaweed production only 5.7% of allocated marine aquaculture areas. (5) The proportion of power vessels for marine fisheries of China's total power vessel fleet is around 65%, and the marine fisheries portion of non - powered vessels constitutes only 12%. The highest proportion of power vessels engaged in marine fisheries activities is between 10 tonnes to 100 tonnes. (6) The portion of marine fishery workers of all fishery industry employees is 22%, and 70% of them are full - time workers. Of marine fishery workers, 64% are in the fishing sector, 22%, aquaculture workers, and the number of employees in marine fisheries is increasing every year. The analysis of China's fishery industry in the production competitiveness indicates as follows : (1) The licensed areas in marine aquaculture, number of fishing vessels, number of marine fishing workers in China's fishery industry are much more than those of Korea's. Therefore China is much more competitive than Korea in the quantity of production side. However, licensed areas for seaweed aquaculture are more extensive in Korea than China. In China, the number of power vessels of between 10 tonnes and 100 tonnes, the licensed shellfish aquaculture areas, and the number of fishing workers within the fisheries industry are much more than those of Korea. (2) It is estimated that the licensed areas in marine aquaculture, number of medium sized power vessels, number of marine fishery workers will be increased as the quantity of production factors grow in China. (3) At present, yield per Ha. in marine cultures is very low in China. Therefore it is estimated that aquaculture techniques have only been diffused recently in China. Yield of fish per Ha especially is much lower than that of Korea. So the level of aquaculture techniques seems much lower than that of Korea. (4) China is behind Korea in production technique, however the number of HP per boat in China is lower than that of Korea. Therefore, China is much more competitive than Korea in Costs. (5) Average fish catches per marine fishery worker in China is only 1/3 that of Korea's, and average marine aquaculture production in China is only 1/2 that of Korea. Therefore we can say Korea is more competitive than China in efficiency. The average income of marine fishery workers in China is higher that that of other Chinese industries. However, the competitiveness of the fisheries industry in China will be increased as more capital is invested and advanced techniques are developed.

• Clean Technology
• /
• v.19 no.3
• /
• pp.219-225
• /
• 2013

Environment-friendly and surfactant-free aqueous cleaning agents have been developed in order to solve various problems generated by surfactants in the aqueous cleaning agents. Aqueous surfactant-free cleaning agents, S-1 and S-2 have been formulated with water-soluble solvents such as propylene glycol and propylene glycol ether on their main components and with some additives. These solvents were chosen because of their good solubility in water and excellent solubility of fluxes which are major contaminants of printed circuit board in the electronic industry. Physical properties of the formulated and the imported cleaning agents were measured to predict their cleaning performance, and their cleaning abilities of flux and solder contaminants were evaluated under the various ultrasonic frequencies by a gravimetric method. The measurement results show that the physical properties of cleaning agent V are generally similar with those of formulated cleaning agents S-1 and S-2. Both the cleaning agent V and the formulated cleaning agents S-1 and S-2 showed similar trends that their pH decrease in the beginning and then increases later on with the increase of their dilution in water. It is considered that the wetting indices of the cleaning agents calculated with experimental values do not not have any influence on their cleaning ability. In ultrasonic cleaning tests under three ultrasonic frequencies of 28, 45, and 100 kHz, their best performances of cleaning solder and flux were obtained at 45 kHz and 28 kHz, respectively, and the cleaning performance of the formulated cleaning agents S-1 and S-2 was better than that of the cleaning agent V. However, in the case of the recommended diluted concentration of 25 wt% cleaning solution, the cleaning performance of the cleaner V for solder and flux was better in the initial stage of cleaning compared to the formulated cleaners. And it may be concluded that the formulated cleaning agents S-1 and S-2 can be applied to cleaning of solder and flux in the industry, based on the experimental results in this study.

• Journal of Korean Home Economics Education Association
• /
• v.21 no.2
• /
• pp.23-43
• /
• 2009

This study examined the relativity between school uniform behavior(especially attitude toward school uniform, school uniform satisfaction, school uniform alteration) and attitude toward appearance in the adolescence. From November to December in 2007, 898 middle school and high school students from four schools in Jeollabuk-do Province were analyzed and the influence of relevant variables was understood to gather basic information about the fashion life in the adolescence. This study used SPSS 11.5 for Windows Program to conduct frequency analysis, factor analysis, reliability analysis, ${\chi}^2$-test, t-test, One-way ANOVA, Duncan's multiple comparison test, and Pearson's correlation. The following summarizes the findings of this study: The results of analysing the factors to the response attitude toward uniforms and attitude toward appearance and clothing attitude emerged four dimensions(fashion, symbolism, cleanliness, alternation), three dimensions(needs value conformity toward appearance). In attitude toward uniform, female students were more actively altering their uniforms than male students and middle school students were more sensitive to trends than high school students. However, high school students were more aware of the cleanliness and alteration of uniforms. Overall, most students were not very satisfied with their uniforms (design, color, texture). When students' attitude toward appearance and demographical characteristics were examined, it was found that female students were more aware of desire, value, and conformity in appearances than male students. By age, it was found that high school students were more aware than middle school students. Also, students receiving KRW 30,000 or more for monthly allowance were more aware than others who receive a lower amount between KRW 10,000 and KRW 20,000. Therefore, most students(62.1%) have experiences in altering uniforms. Especially, more female students and more high school students had such experiences. Uniform alteration is more related to attitude to appearance. In other words, students who choose to alter their uniforms are highly aware of desire, value, and conformity toward appearance. Students who are satisfied with all factors regarding attitude toward uniform, except for alteration, did not alter their uniforms that much. In addition, when the relativity between students' attitude toward appearance with uniform was considered, students that are not very satisfied with their uniforms were more aware of desire, value, and conformity toward appearance. In conclusion, it was found that students' attitude toward appearance and school uniform behavior are closely related and their interests in appearance lead to alteration of uniforms, the clothing in which they spend most time of the day. From now on, students' opinions shall be considered when selecting or designing school uniforms.