• Current Optics and Photonics
• /
• v.1 no.5
• /
• pp.500-504
• /
• 2017

In this paper, we developed a temperature measurement system based on an infrared temperature imaging module for thermal safety verification of a plasma skin treatment device (PSTD). We tested a pilot product of the low-temperature PSTD using the system, and the temperature increase of each plasma torch was well-monitored in real-time. Additionally, through the approximation of the temperature increase of the plasma torches, a certain limitation of the plasma treatment time on skin was established with the International Electrotechnical Commission (IEC) guideline. We determined an appropriate plasma treatment time ($T_{Safe}$ < 24 minutes) using the configured temperature measurement system. We believe that the temperature measurement system has a potential to be employed for testing thermal safety and suitability of various medical devices and industrial instruments.

• KSBB Journal
• /
• v.6 no.2
• /
• pp.135-141
• /
• 1991

This study thus looks into two treatment processess : i) Anaerobic digester coupled with hollow fibre membrane unit. Treatment of starch waste with anaerobic digester-membrane system was studied. $0.17\m^2$ area of hollow fibre membrane unit of known pore size was immersed into laboratory-scale anaerobic digestion system. The pore size of membrane was varied from 0.03 to $\0.15mu$m. The hydraulic retention time of anaerobic digester was varied from 1.5 to 10 days. The effect of hydraulic retention time on treatment efficiency was significant while effect of membrane size was not significant. The gas production was about 0.74㎥/kg COD treated. The COD removal efficient was about 80-95% depending on the hydraulic retention time. ii ) Crossflow ultrafiltration as post treatment to anaerobic filter. The effluent from anaerobic filter, which had a total COD in the range of 4,500-5,200 mg/L was treated by crossflow ultrafiltration units. The study conducted with different membrane pore size indicated that membrace with 1,000,000 molecular weight cut-off size gave a higher COD removal efficiency in the range of 83-87% while giving a study flux of $120-130 L/\m^2$.h. A study was conducted to see the long term clogging effect of membrane also.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.221-223
• /
• 1999

In this work, samples were manufactured variously by changing conventional calcining and sintering conditions and we tried the utilization by making the heat treatment time, which is demanded to high-Tc phase formation, much shorter. We found out optimal heat treatment conditions with the analysis on formation process at superconducting phase in term of the change of calcining and sintering time and then, examined X-ray diffraction(XRD) patterns, scanning electron microscope(SEM) measurement and energy dispersive X-ray spectrometer(EDX) of the samples manufactured under heat treatment conditions which we suggest here. As a result, 2223 high-$T_c$, phase of (Bi,Pb)SrCaCuO superconductor starting with ($Bi_l$ xPbx,)$_2$$Sr_2$$Ca_2$$Cu_3$$O_y$, composition was formed from 1 hr sintering sample at temperature nearby melting point and also the completed sample with calcining and sintering time of 9 hr was formed high-$T_c$.low-$T_c$ phase appearing in sight above the critical temperature of liquid $N_2$.

• Journal of Power System Engineering
• /
• v.17 no.4
• /
• pp.72-78
• /
• 2013

Compacted graphite iron 340 was carried out the heat treatment from 873 to 1,273 K. Compacted graphite iron 340 was evaluated relationship between the sound velocity, the attenuation coefficient and the tensile strength. The obtained results are as following. The signal strength of C scan images were weak according to increasing of heat treatment temperature and time. The amplitude of A scan and B scan was also low. This can be cause that the graphite was grown into the type of vermicular, and the many of grain boundary with ultrasound scattering were increase. The sound velocity was depend upon the heat treatment temperature and time, the attenuation coefficient had nothing to do with the temperature and time. The higher the heat treatment temperature, the tensile strength and the sound velocity were decreased. However, the tensile strength was proportional to the sound velocity. The higher tensile strength, the faster the sound velocity.

• Physical Therapy Rehabilitation Science
• /
• v.9 no.4
• /
• pp.244-251
• /
• 2020

Objective: Physical therapy techniques are required for patients with temporomandibular joint disorder (TMD), but the effects of treatment have not been compared. Therefore, effects of transcutaneous electrical nerve stimulation (TENS) and low level laser (LLL), which are most commonly used interventions, were compared. Design: Randomized controlled trial. Methods: Thirty-six participants with pain in the temporomandibular joint were enrolled, and 12 participants were randomly assigned to either the TENS group, LLL group, or placebo group. Each intervention was performed for a total of 6 sessions for 2 weeks. For the evaluation of the participants, the mouth opening (MO), pressure pain threshold (PPT), and stress were measured at three time periods: baseline, post-test, and follow-up at 2 weeks. Results: Significant interaction between groups according to each evaluation point was found only in PPT-masseter (p<0.05). The evaluation time point at which a significant difference appeared was at the post-test and follow-up at 2 weeks time periods. As a result of the post-test, the LLL group showed a significant improvement compared to the TENS group (p<0.05), and at 2 weeks follow-up, the TENS group showed a significant improvement compared to the placebo group (p<0.05). Conclusions: In this study, an experiment was conducted to compare the treatment effects when TENS, LLL, and placebo were given to patients with TMD. In addition, by quantitatively presenting the effect size of each treatment, this study suggests clinical use of TENS and LLL treatment for TMD.

• Journal of Korean Society of Water and Wastewater
• /
• v.38 no.2
• /
• pp.109-117
• /
• 2024

In this study, various pre-treatment methods were evaluated for microalgae separation. These methods aimed to facilitate safe, rapid, and cost-effective online imaging for real-time observation and cell counting. As pre-treatment techniques, heating, chemical hydrolysis, heating combined with chemical hydrolysis, and sonication were employed. The effectiveness of these methods was evaluated in the context of online imaging quality through experimentation on cultivated microalgae (Chlorella vulgaris and Scenedesmus quadricauda). The chemical treatment method was found to be inappropriate for improving image acquisition. The heating pre-treatment method exhibited a drawback of prolonged cell dispersion time. Additionally, the heating combined with chemical hydrolysis method was confirmed to have the lowest dispersion effect for Chlorella vulgaris. Conversely, ultrasonication emerged as a promising technique for microalgae separation in terms of repeatability and reproducibility. This study suggests the potential for selecting optimal pre-treatment methods to effectively operate real-time online monitoring devices, paving the way for future research and applications in microalgae cultivation and imaging.

• Journal of Cerebrovascular and Endovascular Neurosurgery
• /
• v.25 no.3
• /
• pp.297-305
• /
• 2023

Objective: The term "weekend effect" refers to an increase in the mortality rate for hospitalizations occurring on weekends versus weekdays. In this study, we investigated whether such an effect exists in patients undergoing mechanical thrombectomy for acute ischemic stroke with large vessel occlusion (currently the standard treatment for this condition) at a single center in Japan. Methods: We surveyed 151 patients who underwent mechanical thrombectomy for acute ischemic stroke with large vessel occlusion (75 and 76 patients were treated during daytime and nighttime, respectively) from January 2019 to June 2021. The items evaluated in this analysis were the rate of modified Rankin Scale ≤2 or prestroke scale, mortality, and procedural treatment time. Results: The rates of modified Rankin Scale ≤2 or prestroke scale and mortality at 90 days after treatment did not differ significantly between daytime and nighttime (41.3% vs. 29.0%, p=0.11; 14.7% vs. 11.8%, p=0.61, respectively). The door-to-groin time tended to be shorter during daytime versus nighttime (57 [IQR: 42.5-70] min vs. 70 [IQR: 55-82]) min, p=0.0507). Conclusions: This study did not reveal differences in treatment outcome between daytime and nighttime in patients undergoing mechanical thrombectomy for acute ischemic stroke with large vessel occlusion. Therefore, the "weekend effect" was not observed in our institution.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.4
• /
• pp.365-371
• /
• 2005

In esthetic treatment of bimaxillary protrusion, it is important to move backward the anterior teeth segment. For the backward movement of the anterior teeth segment, orthodontic force and segmental osteotomy have been applied on the clinical treatment until recently. These methods caused long treatment time, anchorage loss, the possibility of root resorption and the complication followed by segmental osteotomy. Therefore, corticotomy has become a major concern lately. This research has been conducted to study the efficiency of corticotomy in the treatment of bimaxillary protrusion comparing the profile change, canine retraction velocity and space closing time. The research compared and analyzed space closing time, canine retraction velocity and profile change in two groups of patients. Both groups were formed out of patients over 18 years old who visited the department of dentistry in Hanyang University for treatments. The experimental group who was treated by corticotomy and Skeletal Anchorage System(SAS). The control group who received orthodontic treatment using SAS. The following results are produced after analyzing both groups. The significant statistic difference in space closing time has been observed in the experimental group as compared with the control group(p<0.05). In the experimental group, the significant statistic increase in canine retraction velocity was also observed(p<0.05). There was no significant difference in profile change between the control group and the experimental group(p<0.05). As a result, orthodontic treatment using corticotomy has a reasonable efficiency in space closing time as compared with the existing orthodontic treatment. Therefore, it is concluded that corticotomy with orthodontic treatment can be reasonably applied to dentofacial abnormality.

• Journal of Dairy Science and Biotechnology
• /
• v.35 no.2
• /
• pp.121-133
• /
• 2017

A small amount of milk is sold as 'untreated' or raw in the US; the two most commonly used heat-treatments for milk sold in retail markets are pasteurization (LTLT, low-temperature long time; HTST, high-temperature short time) and sterilization (UHT, ultra-high temperature). These treatments extend the shelf life of milk. The main purpose of heat treatment is to reduce pathogenic and perishable microbial populations, inactivate enzymes, and minimize chemical reactions and physical changes. Milk UHT processing combined with aseptic packaging has been introduced to produce shelf-stable products with less chemical damage than sterile milk in containers. Two basic principles of UHT treatment distinguish this method from in-container sterilization. First, for the same germicidal effect, HTST treatments (as in UHT) use less chemicals than cold-long treatment (as in in-container sterilization). This is because Q10, the relative change in the reaction rate with a temperature change of $10^{\circ}C$, is lower than the chemical change during bacterial killing. Based on Q10 values of 3 and 10, the chemical change at $145^{\circ}C$ for the same germicidal effect is only 2.7% at $115^{\circ}C$. The second principle is that the need to inactivate thermophilic bacterial spores (Bacillus cereus and Clostridium perfringens, etc.) determines the minimum time and temperature, while determining the maximum time and temperature at which undesirable chemical changes such as undesirable flavors, color changes, and vitamin breakdown should be minimized.

• The Journal of Korean Physical Therapy
• /
• v.13 no.1
• /
• pp.175-188
• /
• 2001

The purpose of this study was to investigate the effect of the cold air application for release of inflamation and pain in patient with acute rheumatoid arthritis who had taken medication(NSAIDs, DMARDs, corticosteroids). The participants had knee joint pain and ESR score over the 30. They were randomly assigned to three groups with each 15. Control group(group I ) were applied cold air and medication, experimental group II were applied hot pack and medication. and experimental group III were applied only medication. They were evaluated from April 1, 2000 to september 1,2000 ,and it was examined by ESR and VAS(visual analoge scale) in Lee Bang Hoon rehabilitation medicine clinic in Jeju Korea. The result of this study were as follow: 1. It was found that group 1, group II and group III had the statistically significant reduction of the ESR score according to treatment time(p<.05). 2. There were not statistically significant differences in ESR change pattern of each group according to treatment time(p>.05). 3. There were not statistically significant differences in the change of ESR according to treatment time between group I and group II , group I and group III , and group II and group III (p<.05). 4. It was found that group I . group II and group III had the statistically significant reduction of the VAS(Visual Analoge Scale) score according to treatment time(p<.05). 5. There were statistically significant differences in VAS score according to treatment time between control group(group I ) and experimental groups(group II and group III)(p<.05), but there were not stsiistically significant differences between experimental groups(p>.05).