• 제목/요약/키워드: treatment time

검색결과 15,847건 처리시간 0.042초

Curing of meat batter by indirect treatment of atmospheric pressure cold plasma

  • Jo, Kyung;Lee, Juri;Lim, Yubong;Hwang, Jaejun;Jung, Samooel
    • 농업과학연구
    • /
    • 제45권1호
    • /
    • pp.94-104
    • /
    • 2018
  • Nitrite is an essential additive for cured meat product. Plasma is ionized gas and reactive nitrogen species in plasma can be infused into meat batter and subsequently generate nitrites by reaction with water molecules after plasma treatment. However, the increase of nitrite in meat batter is limited with direct treatment of atmospheric pressure cold plasma because of the increase of meat batter temperature. Therefore, this study investigated the influence of indirect treatment of atmospheric pressure cold plasma on the physicochemical properties of meat batter. Meat batter was indirectly treated with plasma at 1.5 kW for 60 min. The pH of meat batter decreased while the temperature increased with plasma treatment time. The total aerobic bacterial count of meat batter was not affected by plasma treatment. The nitrite content of meat batter was increased to 377.68 mg/kg after 60 min of plasma treatment. The residual nitrite content of cooked meat batter also increased with plasma treatment time. The CIE $a^*$-value of cooked meat batter increased. As plasma treatment time increased, lipid oxidation tended to increase and protein oxidation significantly increased. According to these results, the indirect treatment of atmospheric pressure cold plasma can be used as a new curing method for replacing synthetic nitrite salts.

투입자원 평가에 근거한 한방 침구 부항 시술 수가의 문제점에 관한 연구 (A Study on the Problem about Oriental Treatment Fee Based on Valuation of Resources)

  • 김용호;이원희;장혜정;임사비나
    • 대한한의학회지
    • /
    • 제29권1호
    • /
    • pp.15-24
    • /
    • 2008
  • Objectives : The purpose of this study is to reexamine current oriental medical treatment fees based on valuation of input resources which are the treating time, the treatment's difficulty, and the material cost. Methods : This study obtained the following results by reviewing the answers given by 172 oriental medical doctors from March 1 to April 15, 2006. To investigate material cost, we took inventory of treatment materials used by 2 oriental hospitals. Results : The current system does not reflect well enough the treating time and treatment's difficulty. Considering current oriental treatment fees, material costs are too much of doctors' fees. Especially, Wang-ssuk-dduem, which is another form of moxibustion treatment, was spent as much as 74.6% on materials cost. Conclusions : The findings suggest the current oriental treatment fees should be revised to reflect the actual input resources into oriental medical doctor activities and to avoid a distortion of physicians' behavior.

  • PDF

Microstructure and Mechanical Properties of Solution Treatment and Sr-Modification of Al-12%Si-1.5%Cu Alloy

  • Surin, Prayoon;Wong on, Jessada;Eidhed, Krittee
    • International Journal of Advanced Culture Technology
    • /
    • 제3권2호
    • /
    • pp.132-137
    • /
    • 2015
  • The purpose of this paper was to investigate the effects of solution treatment time and Sr-modification on the microstructure and property of the Al-Si piston alloy. It was found that as-cast microstructures of unmodified and Sr-modified Al-Si alloys consisted of a coarse acicular plate of eutectic Si, $Cu_3NiAl_6$ and $Mg_2Si$ phases in the ${\alpha}$-Al matrix but different in size and morphology. Both size and inter-particle spacing of Si particles were significantly changed by increasing of the solution treatment time. After a short solution treatment, the coarse acicular plate of the eutectic Si appears to be fragmented. Fully modified microstructure of Sr-modified alloy can reduce the solution treatment time to shorter compared to unmodified alloy. The maximum of a peak hardness value is found in the very short solution treatment of both Al-Si piston alloys. Compared to 10 h solution treatment, the solution treatment of 2-4 h is sufficient to achieve appropriate microstructures and hardness. The short solution treatment is very useful to increase the productivity and to reduce the manufacturing cost of the Al-Si piston alloys.

담배 종자의 입묘율 향상을 위한 SMP 수분함량과 처리기간 (The Water Content and Treatment Period of SMP for Enhanced Seedling Emergence in Tobacco Seeds.)

  • 김영신;신승구;백기현;신주식
    • 한국연초학회지
    • /
    • 제24권2호
    • /
    • pp.82-87
    • /
    • 2002
  • The purposes of this study are to investigate water content and treatment period in Solid Matrix Priming(SMP; method for enhanced rapid and uniform seedling emergence in tobacco seeds). The higher water content made the faster imbibition speed of tobacco seed. But the radicle emergence shorten the period of water equilibrium. The range of water content in SMP treatment within the limits of no radicle emergence of tobacco seed was 28∼32% to dry weight of tobacco seed. The rate of radicle emergence and seedling emergence was higher in water content 30% and 40% treatment plot than that in 50% and 60% treatment plot. But it was not different between SMP treatment and non-SMP treatment. In water content 40% during 9 days treatment, germinative energy was highest, and T50 and mean germination time(MGT) were the shortest. The germination speed was higher in SMP treatment than that in non-SMP treatment. It was not different on the germination rate between non-SMP treatment and SMP treatment.

상황인지를 이용한 진료 안내 시스템 (A Context-Aware Treatment Guidance System)

  • 정화영;박재욱;이용규
    • 한국컴퓨터정보학회논문지
    • /
    • 제19권1호
    • /
    • pp.141-148
    • /
    • 2014
  • 대형병원의 의료 서비스 수준이 점차 높아지면서 이를 이용하려는 환자들이 늘어남에 따라 환자들이 받아야 할 진료의 대기 시간이 증가하여 병원 이용에 어려움을 겪고 있다. 따라서 진료 대기 시간을 단축하기 위하여 처방 전달 시스템, 진료 안내 시스템 등의 다양한 연구들이 진행 중이다. 그러나 기존에 제안되었던 연구들은 환자가 받아야 할 진료들의 상황을 고려하지 않고 순차적으로 진료 순서를 정하기 때문에 환자의 병원 이용 시간이 증가한다는 단점이 있다. 본 논문에서는 환자가 받아야 할 진료들의 예상 대기 시간과 평균 진료 시간을 더한 값인 예상 체재 시간이 가장 작은 진료를 추천하는 상황인지를 이용한 진료 안내 시스템을 제안한다. 상황인지를 이용한 진료 안내 시스템은 추천된 진료 순서를 바탕으로 환자의 스마트폰에 진료 정보 안내 서비스를 제공한다. 본 논문에서 제안한 상황인지를 이용한 진료 안내 시스템을 이용하면 환자가 병원에 머무는 시간이 최소화되며, 같은 시간 내에 최대한 많은 환자를 진찰할 수 있는 장점이 있다. 제안한 상황인지를 이용한 진료 안내 시스템과 기존 처방 전달 시스템의 성능 비교를 통하여 진료 순서 추천 방법의 우수함을 보인다.

Association of the First Antipsychotic Treatment Duration With the Re-Initiation of Treatment in Schizophrenia: A National Health Insurance Data-Based Study

  • Song, Minho;Lee, Jungsun;Kim, Harin;Ahn, Soojin;Choi, Young Jae;Jo, Young Tak;Joo, Sung Woo
    • 대한조현병학회지
    • /
    • 제24권2호
    • /
    • pp.60-67
    • /
    • 2021
  • Objectives: The optimal duration of maintenance treatment for patients with first-episode schizophrenia (FES) remains unclear. We examined the first antipsychotic treatment duration and its association with re-initiation of treatment using a nationwide claim database. Methods: Data from the Health Insurance Review and Assessment Service database in South Korea for 2007-2016 were used. Linear regression analysis and Cox proportional hazard models were used to evaluate the associations between the duration of the first antipsychotic treatment, time to re-initiation of treatment, and occurrence of treatment re-initiation. Results: Of 30,143 patients with FES, 80.4% (n=24,231) received <2 years of the first antipsychotic treatment. In patients who discontinued treatment (n=23,030), the rate of treatment re-initiation was 74.2% (n=17,086). As the duration of the first antipsychotic treatment increased, the time to re-initiation of treatment decreased (β=-0.146, p<0.001); however, the rate of treatment reinitiation was relatively constant (hazard ratio=1.001, p<0.001). Conclusion: Long-term antipsychotic treatment was not significantly associated with the rate of treatment re-initiation but showed a negative association with the time to re-initiation of treatment. Further research is needed to better understand the optimal treatment duration for FES.

열처리 조건에 따른 XLPE / EPDM 계면의 전기적 특성 (Electrical Characteristics of the Interfacial Layer between XLPE/EPDM Laminates on the Heat Treatment)

  • 최원창;이제정;김석기;조대식;한상옥;박강식
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1997년도 추계학술대회 논문집
    • /
    • pp.225-228
    • /
    • 1997
  • The main fault in this interface is that power cable insulating materials are mainly composed of a double layered structure, XLPE/FPDM laminates in cable joint. In this parer, we instituted the interface of XLPE/EPDM laminates and then investigated the breakdown and conduction characteristics as a function of heat treatment time. The results showed that conduction current was influenced by volatile crosslinking by-products which remained inside the insulating material during the production of XLPE and EPDM, especially during heat treatment process. And conduction current of XLPE/Oil 12500cSt/EPDM was more stable than XLPE/Grease/EPDM from the long heat treatment time. AC breakdown strength of silicone oil itself from the heat treatment was changed during the 4∼12 hour heat treatment time.

  • PDF

DAF(Dissolved Air Flotation)를 이용한 정수처리에서 처리조건에 따른 VOCs(Volatile Organic Compounds)의 처리효율에 대한 연구 (Removal Rates of VOCs(Volatile Organic Compounds) for Treatment Condition using DAF(Dissolved Air Flotation) in Water Treatment)

  • 김미정;전세진
    • 상하수도학회지
    • /
    • 제13권3호
    • /
    • pp.91-100
    • /
    • 1999
  • Treatment conditions of DAF(Dissolved Air Flotation) and removal rates of VOCs(Volatile Organic Compounds) in mixed water of H raw water and VOCs were investigated. The used VOCs were benzene, toluene, ethylbenzene, and xylene in aromatic compounds and iso propyl mereaptan, n-butyl mereaptan, dimethyl disulfide, and iso butyl mercaptan in odors. The related parameters include water type, treatment method, clay concentration, pH condition, flocculation time, flotation time, per-cent recycle, water temperature, pressure. The removal rates of VOCs were different on treatment process and water condition. Treatment time was longer, removal rates of VOCs was higher. Water temperature was more important than pressure in DAF parameters. Molecular weight was related with removal rate in several kinds of VOCs were decraesed by competition of each component in II raw water. When algac blooming D water was treated by DAF, TCOD(Total chemical Oxygen Demand) and chorophyll a was removed over 96%.

  • PDF

Pre- and In-Hospital Delay in Treatment and in-Hospital Mortality after Acute Myocardial Infarction

  • An, Kyuneh;Koh, Bongyeun
    • 대한간호학회지
    • /
    • 제33권8호
    • /
    • pp.1153-1160
    • /
    • 2003
  • Purpose. 1) To identify the time taken from symptom onset to the arrival at the hospital (pre-hospital delay time) and time taken from the arrival at the hospital to the initiation of the major treatment (in-hospital delay time) 2) to examine whether rapid treatment results in lower mortality. 3) to examine whether the pre- and in-hospital delay time can independently predict in-hospital mortality. Methods. A retrospective study with 586 consecutive AMI patients was conducted. Results. Pre-hospital delay time was 5.25 (SD=10.36), and in-hospital delay time was 1.10 (SD=1.00) hours for the thrombolytic therapy and 50.24 (SD=121.18) hours for the percutaneous transluminal coronary angio-plasty (PTCA). In-hospital mortality was the highest when the patients were treated between 4 to 48 hours after symptom onset using PTCA (p=.02), and when treated between 30 minutes and one hour after hospital arrival using thrombolytics (p=.01). Using a hierarchical logistic regression model, the pre- and in-hospital delay times did not predict the in-hospital mortality. Conclusion. Pre- and in-hospital delay times need to be decreased to meet the desirable therapeutic time window. Thrombolytics should be given within 30 minutes after arrival at the hospital, and PTCA should be initiated within 4 hours after symptom onset to minimize in-hospital mortality of AMI patients.

Delayed awakening time from general anesthesia for dental treatment of patients with disabilities

  • Choi, Junglim;Kim, Seungoh
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • 제21권3호
    • /
    • pp.219-226
    • /
    • 2021
  • Background: Patients with disabilities often require general anesthesia for dental treatment because of their cooperative or physical problems. Since most patients with disabilities take central nervous system drugs, the management of recovery status is important because of drug interactions with anesthetics. Methods: The anesthesia records of patients under general anesthesia for dental treatment were reviewed, and data were collected. Healthy patients under general anesthesia for dental phobia or severe gagging reflex were designated as the control group. Patients with disabilities were divided into two groups: those not taking any medication and those taking antiepileptic medications. The awakening time was evaluated in 354 patients who underwent dental treatment under general anesthesia (92 healthy patients, 183 patients with disabilities, and 79 patients with disabilities taking an antiepileptic drug). Based on the data recorded in anesthesia records, the awakening time was calculated, and statistical processes were used to determine the factors affecting awakening time. Results: Significant differences in awakening time were found among the three groups. The awakening time from anesthesia in patients with disabilities (13.09 ± 5.83 min) (P < 0.0001) and patients taking antiepileptic drugs (18.18 ± 7.81 min) (P < 0.0001) were significantly longer than in healthy patients (10.29 ± 4.87 min). Conclusion: The awakening time from general anesthesia is affected by the disability status and use of antiepileptic drugs.