• Journal of Society of Preventive Korean Medicine
• /
• v.3 no.1
• /
• pp.35-54
• /
• 1999

This thesis shows about the meaning of treatment rate increasing, the current treated level and the reason of low treatment rate and increasing methods. 1. Treatment rate incresing means high treat level within short time, keeping treatment effect for a long time as well as raising treatment rate. 2. The current by diseases each others completed treatment rate of oriental medicine is 14.0% to 89.7%$(mean:\;{\pm}40.0%)$. Therefore the rate is show too low. 3. The reasons of low treatment rate; low academic level of oriental, academic limitation, clinic and prevention problem of oriental medicine, lack of medical approch suitable for current diseases and symptoms, mostly incurrable diseases using oriental medicine, lack of preventive education, disappropriate medical service and nonspecialty of the treatment, etc. 4. The next methods for incresing the treatment rate must be improved; such as accurate establishment of process that diagnosis symptoms and treats them, system research of microdiagnosis, positive treatment with medicine and nonmedicine method at the same time, appropriate subdivision and actualization of clinical basic research, research of dose and response, diversity of treatment methods and forms, development of treatment service and prevention based on health level, enormous change as cure medicine and opening-up of new disease field, specialization of medical examination, reinforcement of public medical part and herbal drugs use with same origin, mental and pysical stability of patients, accurate extract and oral drinking ways, etc.

• Journal of Korean Medical classics
• /
• v.19 no.1 s.32
• /
• pp.110-127
• /
• 2006

Recently there are concerned about External Treatment in Oriental medicine and a lot of study is researched. But it is not enough to apply to clinic and it has difficult subject. ${\ulcorner}$Wai-Ke-Zheng-Zong${\lrcorner}$ had been made by Chen-Shi-gong(陳實功). It included synthetic External Treatments in those days. So we would like to bring out external treatment methods in it and be easy to use clinic. In addition we want extend territory of treatment methods of oriental medicine. We have researched external treatment of ${\ulcorner}$Wai-Ke-Zheng-Zong${\lrcorner}$ according to below three methods. We researched using external treatment methods of each disease and arranged it. In ${\ulcorner}$Wai-Ke-Zheng-Zong${\lrcorner}$, there are 150 external treatment. And we arranged external treatments by each methods. We classified external treatment methods by 8 class. Conclusion is that, ${\ulcorner}$Wai-Ke-Zheng-Zong${\lrcorner}$ has described 122 external diseases. External treatments of ${\ulcorner}$Wai-Ke-Zheng-Zong${\lrcorner}$ had been used to cure 75 disease from the whole disease. External treatments of ${\ulcorner}$Wai-Ke-Zheng-Zong${\lrcorner}$ was more than 150 kinds. And each disease treated by more than on external treatment. External treatment methods of ${\ulcorner}$Wai-Ke-Zheng-Zong${\lrcorner}$ have contained hot compress therapy, fumigation therapy, bathing therapy, application therapy, medication bag therapy, medication plug therapy, medication massotherapy, aroma therapy and so on.

• Journal of Acupuncture Research
• /
• v.40 no.2
• /
• pp.97-110
• /
• 2023

This review aimed to examine and analyze trends of clinical research using case studies on facial spasms in Korean medicine. Seven web databases were searched for case studies on facial spasms using Korean and English search terms. Case studies were selected using the exclusion and inclusion criteria. Overall, 13 case studies were selected, analyzed, and classified according to the publication year and journal, study participants, cause, treatment methods, pattern identification, evaluation methods, improvement, and side effects. Case studies reporting on various treatment methods in Korean medicine, including acupuncture and pharmacopuncture for facial spasms, have been published since 2000. In addition, studies on new treatment methods in Korean medicine for facial spasm have been published. Combination therapy is the most common method used in Korean medicine-based case studies; therefore, future studies on single treatment are necessary. Most of the case studies on Korean medicine reported improved symptoms and patient satisfaction with the Korean medicine treatment method. No side effects were reported, except for facial swelling and bruising, indicating that Korean medicine treatment methods for facial spasm were safe and effective. Therefore, the Korean medicine treatment methods for facial spasm can be actively used in clinical practice and future research.

• Journal of Digestive Cancer Research
• /
• v.11 no.2
• /
• pp.99-103
• /
• 2023

Malignant tumors located near the papilla of the duodenum can cause concomitant biliary and duodenal obstruction, which reduces the quality of life and increases the morbidity and mortality. Apart from traditional surgical treatment methods, various treatment methods such as endoscopic treatment and radiological interventions are used for the treatment. This study aimed to explore treatment methods according to the situation of patients with malignant biliary obstruction combined with duodenal obstruction.

• The Korean Journal of Applied Statistics
• /
• v.25 no.4
• /
• pp.575-587
• /
• 2012

The effect of a new treatment is proven through the comparison of a new treatment with placebo; however, the number of parent non-inferiority trials tends to grow proportionally to the number of active controls. In a non-inferiority trial a new treatment is approved by proof that the new treatment is not inferior to an active control; however, both additional assumptions and historical trials are needed to show (through the comparison of the new treatment with the active control in a non-inferiority trial) that the new treatment is more efficacious than a putative placebo. The two different methods of using the historical data: frequentist principle method and meta-analytic method. This paper discusses the statistical methods and different Type I error rates obtained through the different methods employed.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.103-112
• /
• 2017

PURPOSES : In this study, field performance evaluation of crack treatment of pavement and the feasibility of surface treatment of pavement are presented. The performance and cost of preventive maintenance methods have been previously verified, and the methods are being used in many developed countries and cities. However, the performance and cost of the system have not been verified in domestic, field applications. Therefore, in order to improve performance, the field performance is evaluated, and a reasonable cost is proposed. METHODS : Visual Inspection was conducted to evaluate the field application and performance of the preventive maintenance method. In addition, the PCI index was calculated from the results of visual inspection of the application area of the surface treatment method, and the performance life of each method was predicted. For the economic evaluation, life cycle cost analysis was performed using the life cycle cost analysis program. RESULTS :In order to evaluate and quantify the field performance of crack repair material, the residue condition of the pavement surface after crack treatment, rather than the performance of the material, is evaluated. In addition, the crack resistance and performance life of surface treatment methods are evaluated. The cost of currently available treatment methods are compared to the common pavement cut and overlay method, and it is determined that the preventive method is not economical based on life cycle cost analysis. CONCLUSIONS :Because of the characteristics of cracking, it is necessary to conduct the evaluation of currently applied methods and the analysis of the cause of damage, by visual inspection. Moreover, in order to evaluate the performance and economic suitability of the currently applied surface treatment methods, it is necessary to acquire information on application sections by monitoring their long-term conditions and performance.

• Journal of Environmental Health Sciences
• /
• v.27 no.2
• /
• pp.119-126
• /
• 2001

The key point in establishing water quality management measures is how to decide the load reduction for pollution sources. This study was performed to compare reduction methods for BOD loadings to achieve water quality standards at the end of the Yeongsan river. The target year is 2006 and 2011 and reduction methods are uniform treatment and treatment by influence rate. Using QUAL2E model, the study was performed under the conditions of establishing and non-establishing the publicly owned treatment works(POTWs). Uniform treatment which allocate the same reduction rate to pollution sources showed that all streams into the river should be applied for the reduction. However, treatment by influence rate which allocate the reduction rate by the order of influence rate showed that achieving target quality might be possible with a few streams for the reduction. But total amount of load reduction of streams was not significantly different from two methods.

• Journal of Environmental Health Sciences
• /
• v.23 no.1
• /
• pp.1-7
• /
• 1997

We investigated the influence of various known sterilization methods on atrazine assimilation. The present study was designed to investigate the effect of autoclaving, sodium azide and mercuric chloride treatment on the assimilation of atrazine in soil and sediment. The sterilization reactor treated with sodium azide resulted in $^{14}CO_2$ generation and atrazine was rapidly disappeared from reactor through chemical reaction with sodium azide. These findings seem to indicate that sodium azide sterilization is not recommended for atrazine studies. In sample reactors autoclaved or treated with mercuric chloride, $^{14}CO_2$ generation was not detected and most of the disappeared atrazine was found to exist as hydroxyatrazine. These results suggested that autoclaving or mercuric chloride treatment could be effective sterilization methods. However, chemical properties(pH and redox potential) of soil and sediment were altered by any of the sterilization methods applied. So it was suspected that these altered properties could affect distribution and mineralization of atrazine in soil and sediment. In addition, both autoclaving and mercuric chloride treatment have altered $K_d$ values of hydroxyatrazine more significantly than those of atrazine. Consequently, although autoclaving and mercuric chloride treatment are effective sterilization methods, one must be careful in using them in practice as these methods may cause chemical degradation of both of atrazine and its metabolites and changes in chemical properties of soil and sediment. In conclusion, careful assessment of sterilization methods must be made for the degradation studies of chemicals in soil and sediment in order to minimize possible undesirable chemical degradation of sample and/or changes in physico-chemical properties of soil and sediment by the selected sterilization methods.

• Food Science of Animal Resources
• /
• v.21 no.2
• /
• pp.126-132
• /
• 2001

This study was carried out to investigate the effect of ultrasonic treatment on physicochemical and sensory properties of cooked chicken meat. Moisture content of ultrasonic treated breast meat was higher than that of control, fat content of control of breast and leg meat were higher than that of ultrasonic treatment, and protein of control of breast meat was higher than that of ultrasonic treatment. Hunters L(lightness)-and a(redness)-value were not different between cooking methods, L-value of breast meat and a-value of leg meat were higher without regard to cooking method. Hunterb (yellowness)-value was not different among cooking chicken meats. Cooking yield was not different between cooking methods, pH of ultrasonic treated chicken meats were higher than that of control. Water holding capacity and salt soluble protein extractability of ultrasonic treated breast meat were greater than that of control. Water soluble protein extractability of ultrasonic treated leg meat was higher than that of control, and shear force value was not different between cooking methods. Hardness, cohesiveness and gumminess were not different between cooking methods and parts of muscle. Springiness of ultrasonic treated leg meat was greater than that of control and chewiness of breast meat was higher than that of leg meat. Aroma, texture, juiciness and overall acceptability were not different between cooking methods, taste of ultrasonic treated leg meat was higher than that of control. In addition, the sensory scores of parts of muscle were affected greater than that of cooking methods.

• Corrosion Science and Technology
• /
• v.8 no.6
• /
• pp.209-216
• /
• 2009

In this study the effect of different surface finishing techniques on the pitting corrosion behaviour of a commercial 304 stainless steel alloy was investigated. Surface finishing methods were divided into two categories, i.e. mechanical and chemical. Mechanical treatment methods include power tooling such as grinding, emery paper brushing, stainless steel wire brushing and stainless steel shot blasting. Chemical treatment methods include chemical passivation (phosphoric acid, citric acid, nitric acid) and electro-cleaning (phosphoric acid and citric acid). Potentiodynamic polarization experiments were carried out in 3.5 wt. % NaCl solution at room temp. (20 $^{\circ}C$). The results showed that chemical treatment methods improved the corrosion resistance of stainless steel 304, measured in terms of pitting potential ($E_{pit}$). Corrosion resistance of the specimens was increased in the order of; electro-cleaning > manual passivation > mechanical cleaning. Surface of electro-cleaned specimens was smoother than rest of the surface treatment methods. Chrome content in chemically treated specimens was higher than in mechanically treated specimens as shown by EDX analysis.