• 한방안이비인후피부과학회지
• /
• 제7권1호
• /
• pp.169-175
• /
• 1994

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권5호
• /
• pp.2829-2834
• /
• 2013

The objective was to analyze the radiotherapy (RT) practice at the cancer centre of a tertiary academic medical institution in Delhi. This audit from an Indian public institution covered patient care processes related to cancer diagnosis, integration of RT with other anti-cancer modalities, waiting time, overall treatment time, and compliance with RT. Over a period of one year, all consecutively registered patients in radiotherapy were analyzed for the audit cycle. Analysis of 1,030 patients showed median age of 49.6 years, with presentation as stage I and II in 14.2%, stage III and IV in 71.2% and unknown stage in 14.6%. A total of 974 (95%) were advised for RT appointment; 669 (68.6%) for curative intent and 31.4% for palliation. Mean times for diagnostic workup and from registration at cancer centre to radiotherapy referral were 33 and 31 days respectively. Median waiting time to start of RT course was 41 days. Overall RT compliance was 75% and overall duration for a curative RT course ranged from 50 days to 61 days. Non-completion and interruption of RT course were observed in 12% and 13% respectively. Radiotherapy machine burden in a public cancer hospital in India increases the waiting time and 25% of advised patients do not comply with the prescribed treatment. Infrastructure, machine and manpower constraints lead to more patients being treated on cobalt (74%) and by two-dimensional (78%) techniques.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.208-208
• /
• 2017

No-tillage practices are expected to provide several benefits such as increasing soil organic matter, reducing labor time and saving energy cost compared with conventional tillage practices. This study was conducted to investigate the effects of no-tillage dry-seeding on rice growth and soil properties in comparison with other rice cultivation methods, machine transplanting and wet-hill-seeding on puddled paddy. Rice seedling establishment was slightly higher in no-tillage dry-seeding treatment ($145seedling\;m^{-2}$) than wet-hill-seeding on puddled paddy treatment ($111seedling\;m^{-2}$), but the seedling establishment in both treatments fell within the optimum range for direct seeding rice cultivation. Plant height, number of tillers and chlorophyll content (SPAD value) of rice in no-tillage dry-seeding treatment were higher than those of the other treatments. However, no significant differences in grain yield was observed among three cultivation methods, and the yield ranged 5.8 to $5.9ton\;ha^{-1}$. The heading date from seeding under no-tillage dry-seeding treatment was on average 109 days, which was similar to that under machine transplanting treatment (112 days), but 10 days later than that under wet-hill-seeding on puddled paddy treatment (99 days). Grain quality characteristics grown in no-tillage dry-seeding were similar to those grown in the other cultivation methods. These results indicate that no-tillage dry-seeding practice is comparable to conventional tillage system in terms of seedling establishment, growth, yields and grain quality.

• 한국재료학회지
• /
• 제30권9호
• /
• pp.465-473
• /
• 2020

For surface hardening of a continuous casting mold component, a fundamental metallurgical investigation on dissimilar laser clads (Cu-NiCrBSi) is performed. In particular, variation behavior of microstructures and mechanical properties (hardness and wear resistance) of dissimilar clads during long-term service is clarified by performing high-temperature post-clad heat treatment (temperature range: 500 ~ 1,000 ℃ and isothermal holding time: 20 ~ 500 min). The microstructures of clad metals (as-clads) consist of fine dendrite morphologies and severe microsegregations of the alloying elements (Cr and Si); substrate material (Cu) is clearly confirmed. During the post-clad heat treatment, the microsegregations are totally homogenized, and secondary phases (Cr-based borides and carbides) precipitated during the short-term heat treatment are also almost dissolved, especially at the heat treatment conditions of 950 ℃ for 500 min. Owing to these microstructural homogenization behaviors, an opposite tendency of the surface mechanical properties can be confirmed. In other words, the wear resistance (wear rate) improves from 4.1 × 10^-2 ㎣/Nm (as-clad condition) to 1.4 × 10^-2 ㎣/Nm (heat-treated at 950 ℃ for 500 min), whereas the hardness decreases from 453 HV (as-clad condition) to 142 HV (heat-treated at 950 ℃ for 500 min).

• 한국환경과학회지
• /
• 제29권10호
• /
• pp.997-1002
• /
• 2020

In this study, we investigated the effects of the eco-friendly chemical bio-sulfur, on the citrus melanose-causing pathogen, Diaporthe citri, and on the pest, Panonychus citri. In an open field experiment with a plot-scale application of the chemicals: Mancozeb, lime sulfur, lime sulfur + machine oil, and bio-sulfur, the control group showed 70.6% disease severity compared with 10.3% for the Mancozeb-treated group. Among the eco-friendly treatments, disease severity was the lowest for the group treated with lime sulfur + machine oil (32.2%) and was 53.9%, 58.8%, and 58.1% following treatment with lime sulfur, and bio-sulfur diluted 500 and 1000 times, respectively. The proportion of diseased fruit showed similar results, suggesting that bio-sulfur is an effective alternative to lime sulfur. Three days after treatment acaricidal effects on P. citri showed a 197.6% control survival rate whereas the machine oil, and bio-sulfur diluted 500 and 1000 times treatments showed rates of 2.9%, 5.8%, and 9.0%, respectively. After three days, the control value for bio-sulfur diluted 1000 times was 73.2% compared with the values for the machine oil (96.4%) and bio-sulfur diluted 500 times (94.6%) treatments. Therefore, we suggest that additional research is needed on the combined application of bio-sulfur and oils to enhance the additive control effect on citrus melanose and Panonychus citri.

• 한국IT서비스학회지
• /
• 제22권4호
• /
• pp.97-110
• /
• 2023

In this study, we propose a technique to automatically generate transfer documents using sensor data from livestock manure transfer systems. The research involves analyzing sensor data and applying machine learning techniques to derive optimized outcomes for livestock manure transfer documents. By comparing and contrasting with existing documents, we present a method for automatic document generation. Specifically, we propose the utilization of Gradient Boosting, a machine learning algorithm. The objective of this research is to enhance the efficiency of livestock manure and liquid byproduct management. Currently, stakeholders including producers, transporters, and processors manually input data into the livestock manure transfer management system during the disposal of manure and liquid byproducts. This manual process consumes additional labor, leads to data inconsistency, and complicates the management of distribution and treatment. Therefore, the aim of this study is to leverage data to automatically generate transfer documents, thereby increasing the efficiency of livestock manure and liquid byproduct management. By utilizing sensor data from livestock manure and liquid byproduct transport vehicles and employing machine learning algorithms, we establish a system that automates the validation of transfer documents, reducing the burden on producers, transporters, and processors. This efficient management system is anticipated to create a transparent environment for the distribution and treatment of livestock manure and liquid byproducts.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.185-189
• /
• 2001

In order to prevent the production defects the optimum design of product, jig and fixture putting in the field is very significant manufacturing method. Drilling Jig is the device according to industrial demand for multi manufacturing products on the growing at alarming rate. In the field of design and making for machine tool working, welding, assembling with jig and fixture for mass production is a specific division. They require analysis of many kinds of important factors, theory and practice of machine tool operating process and jig & fixture structure, machining condition for tool making, tool materials, heat treatment of jig & fixture components, know-how and so on. In this study we designed and constructed a drilling jig of mass production and performed tryout under the Auto CAD, Auto Lisp database, that we made by database, and window environment. Especially this study is reveals with the analysis of part drawing, jig planning, jig design etc, and then the result of drill jig's making try out.

• 한국생산제조학회지
• /
• 제7권3호
• /
• pp.51-51
• /
• 1998

It is very important to test linear cycle positioning accuracy of Machining centers as it affect all other machines machined by them in industries. For example, if the linear positioning accuracy of each axes directions is bad, the size of works will be wrong and the change-ability will be bad in the assembly of machine parts. In this paper, measuring systems are organized to measure linear displacements of table or spindle of machine center using laser interferometer, magnescale and tick pulses comming out from computer in order to get data at constant time intervals from the sensors. And each set of data gotten from test is expressed to a plots by computer treatment and the results of linear positioning error motion is estimated to numerics by statistical treatments.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.841-844
• /
• 2002

The vertical impact crusher is the machine which could produce artifical sand similar to natural aggregates in the site of guarry and pits. FEM was used to analyse the stress and strength of the machine at high rotational speed. The test specimen was made from the same material as the shaft and tension tests were conducted. The shaft under extreme conditions was analysed to determine maximum stress level and its location from the results. The maximum level of stress and its location could be predicted.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 춘계학술대회
• /
• pp.211-220
• /
• 2004

The vertical impact crusher is the machine which could produce artifical sand similar to natural aggregates in the site of guarry and pits. FEM was used to analyse the stress and strength of the machine at high rotational speed. The test specimen was made from the same material as the shaft and tension tests were conducted. The Shaft under extreme conditions was analysed to determine maximum stress level and its location from the results. The maximum level of stress and its location could be predicted.