• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVI)
• /
• pp.247-251
• /
• 2005

This research was performed for developing of biological treatment process of odor gas such as MEK, $H_{2}S$, and toluene, which is generated from the food waste recycling process. To establish the operational conditions of odor gas removal by small-scale biofiltration equipment, it was continuously operated by using toluene as a treating odor object. When the odor treating microorganisms were adhered to fibril form biofilter, high removal efficiency over 93% was obtained by biofilm formation. At 400 ppm of inlet odor gas concentration and 10 sec of retention time, the removal efficiency was 76% and 93% in 1st stage reactor and 2nd stage reactor, respectively. However, the removal efficiency remained over 97% at the operational conditions above 15 sec of retention time.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권5호
• /
• pp.454-458
• /
• 2010

Velopharyngeal insufficiency is defined as a status in which nasal cavity and oral cavity can not be sepa-rated when speaking, swallowing by any reason. It has been treated by palatorrhaphy, pharyn-geal flap, local flap, free flap etc. When the size of the defect is small, it can be restored by palatorrhaphy, pharyngeal flap etc. But they are not proper for treatment of the large size of defect. In that case, local flap and free flap are more beneficial. Although large defect can be restored by free flap technique, but it is very complex, time-consuming and may bring about esthetical, functional complications of donor site. Buccinator myomucosal flap is a kind of local flap and reported for the first time by Bozola et al in 1989 and it has become a useful way for reconstruction of large intraoral defect. Authors experienced the use of buccinators myomucosal flap for treating secondary velopharyngeal insufficiency with large soft palate defect and obtained good result. So we report the case with literature reviews.

• Environmental Engineering Research
• /
• 제17권3호
• /
• pp.139-144
• /
• 2012

In this study, the effects of starvation on floc characteristics when treating saline wastewater using a sequencing batch reactor (SBR) were investigated. The effectiveness over 5 days of starvation for aerobic and non-aerobic strategies for maintaining the physical characteristics of floc-forming sludge and the recovery period needed to regain the initial pollutant removal efficiency were investigated. Experiment results revealed that the sludge volume index (SVI) increased and the floc size and fractal dimension decreased after starvation under both aerobic and non-aerobic conditions. Sludge settleability deteriorated faster under aerobic conditions compared to non-aerobic conditions. Under non-aerobic conditions, the SBR required less time to return to its initial pollutant removal efficiency and settleability. Floc size, fractal dimension, and SVI were observed to be fairly correlated with each other. The results demonstrated that it was better to maintain the sludge under non-aerobic rather than aerobic starvation, because it adapted to, resisted starvation and had a quicker re-start afterward.

• 성인간호학회지
• /
• 제27권2호
• /
• pp.223-232
• /
• 2015

Purpose: Parkinson's disease (PD) has a high incidence of psychiatric comorbidity, specifically depression and anxiety. This study examined the effectiveness of group cognitive behavioral therapy (CBT) in treating depression and anxiety. Methods: The study included 42 participants, aged between 52 and 77 years, who were diagnosed with idiopathic Parkinson's disease (IPD) and reported suffering from depression and anxiety. Patients were attending a department of outpatient neurology at D University Schools of Medicine in B Metropolitan city. A structured telephone-administered cognitive behavioral therapy was conducted for eight weeks. A repeated measure ANOVA was used to analyze results at pretest, post-test, and four weeks follow up. Results: According to service method, there were significant differences between the two groups in depression, anxiety and stigma was significant difference between time (p<.05). Analysis of the interaction between time and service method revealed significant differences in depression and anxiety (p<.05). Conclusion: The results suggest that telephone-administered cognitive behavioral therapy may be effective and may provide opportunity to adapt to individual needs for treating depression and anxiety in patients with Parkinson's disease.

• Elastomers and Composites
• /
• 제35권4호
• /
• pp.296-302
• /
• 2000

신발 중창용 EVA 발포체의 수용성 폴리우레탄계 접착제에 대한 접착력을 증가시키기 위하여 발포체 표면을 저온 플라즈마 처리하였다. 플라즈마 처리기체 종류, 플라즈마 처리시간, 전극과 시료와의 거리등의 조건에 따른 발포체의 표면형태, 접촉각 및 수성폴리우레탄에 대한 접착력 등을 주사전자현미경, 접촉각 측정기, 인장강도시험기 등을 사용하여 측정하였다. 플라즈마 처리시간이 증가함에 따라 플라즈마 에칭에 의한 표면 형태의 변화가 더욱 뚜렷하게 나타났으며, 물로 측정한 발포체의 표면 접촉각은 현저히 감소하였다. 플라즈마 처리시간이 증가함에 따라 접착력은 현저히 증가하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.3-8
• /
• 2001

The mineral industry of the United States is going through a challenging time. The US as an industrial nation faces with increasing demand in raw materials to fuel various industrial sectors but, at the same time, meeting environmental constraints associated with excavating and extracting these raw materials. In addition, gradual depletion of material resources. and the necessity of handling more complex forms of resources of primary origin have led to a decline in her resource productivity, once a strategic advantage of the U.S. As a result. the United States currently relies heavily upon foreign importation of various materials such as precious and strategic metals. However, since the US is the major consumer of most of these materials, the recovery of these values from scrap would help renew her position as a resource-producing nation, and ultimately help spur its domestic economy. Furthermore. recycling would also help maintain a clean environment and reduce energy consumption. In this paper. the author attempts to discuss opportunities and challenges lied ahead of the US mineral in relation to recovering their much-needed resources from secondary sources. The need and demand in various metals in the US will be reviewed and discussed. The implication of resource recovery from secondary sources will also be discussed. Extraction methods treating secondary sources are inherently different from those for primary sources. There is a need for new technologies which are metallurgically efficient and environmentally benign in treating secondary sources. Ways to meet such a need will be examined and key factors to be considered in approaching these challenges will be discussed.

• 열처리공학회지
• /
• 제2권4호
• /
• pp.27-39
• /
• 1989

The effect of gas mixing ratios during gas nitrocarburizing treatment on the formation of compound layer and the mechanical properties has been studied for hot work tool steel by using a combined heat treating technique. The thickness of compound and diffusion layers has been shown to grow as a parabolic relation with increasing the amount of ammonia at a given flow quantity of $CO_2$ gas. The compound layer consists mainly of ${\varepsilon}-Fe_3$(C, N) with small amounts of ${\gamma}^{\prime}-Fe_4N$ and ${\alpha}$-Fe. The combined heat treated hot work tool steel has shown that the thickness of compound layer increases with increasing nitrocarburizing time, but the rate of growth slows down as gas nitrocarburizing time goes more than two hours. Tensile properties have given a remarkable improvement. In particular, the wear resistance of combined heat treated hot work tool steel has exhibited an improvement of about 165% greater than that obtained from conventional quenching and multi-tempering treatments.

• 한국가구학회지
• /
• 제19권1호
• /
• pp.83-90
• /
• 2008

Gypsum-wood composites were made by introducing inorganic substances into wood using calcium chloride, first treating solution, and sodium sulfate, secondary treating solution, by double diffusion process under atmospheric pressure at room temperature. The process conducted as follows: water saturated specimens were soaked in calcium chloride solutions at several concentration. Then the specimens were soaked further in saturated sodium sulfate solution, and they were leached in flowing tap water for 24h. To attain sufficient weight percent gain (WPG) values, the suitable concentration of calcium chloride and soaking time in saturated sodium sulfate solution were 20% and 48h, respectively. Inorganic substances were produced mainly in the lumina of tracheides. It was made sure that these substances were dihydrate gypsum($CaSO_4$ $2H_2O$) by X -ray microanalysis (SEM-EDX). The composites had good fire resistance due to low heat transfer rate of gypsum formed in wood. However, the composites had little decay resistances, because they showed high weight losses by test fungi attacks.

• 한국세라믹학회지
• /
• 제11권2호
• /
• pp.11-16
• /
• 1974

Korean Yung-il bentonite was treated with potassium chloride, zinc chloride, calcium chloride, ferric chloride, or chromic chloride solutions respectively varying their concentration, treating temperature and treating time. The adsorbabilities of methylene blue on these pretreated bentonite were investigated. In the case of treatment with potassium chloride solution, the improvement of the adsorbahility of methylene blue on the products was observed, and in the best result the adsorbability was 1.6 times better than that on the original bentonite. With zinc chloride solution, the optimum adsorbability was a value of 1.7 times better than that on the original bentonite. With ferric chloride, chromic chloride or calcium chloride solution, slight improvement of the adsorbability was observed.

• 열처리공학회지
• /
• 제11권4호
• /
• pp.315-323
• /
• 1998

This study has been conducted to develope the combined heat treating technique of gas carburising - gas nitriding and gas carburising to improve the hot working performance of type H3 hot work tool steel. Case depth and carbrides coarsening were increased with increasing carburising temperature and time, respectively. Surface hardness showed decreasing tendency with increasing 2nd tempering temperature after carburising treatment. After carburising, 2nd treatment at 500 to 600 was chosen according to a hardness demand of final product. High temperature tempering resistance showed more excellent quality during such carburising-nitriding or carburising than complex treatment as after conventional hardening.