• The Journal of Korean Society for Radiation Therapy
• /
• v.11 no.1
• /
• pp.28-32
• /
• 1999

Verifying the treatment value(Monitor Unit) unnecessarily involves too many simple and repetitive calculation processes, that is, individual computation process using the data(PDD value, Scp Factor, SSD Factor, Tray Factor) on the data book. We intend to minimize the time required to check the Monitor Unit through computerized calculation. Using $^{\ast}(multiplication)$, /(division), +(sum), if function, among others, which are present in the Excell program, MS office program, the Monitor Unit was obtainable through A/P value, Scp Factor and PDD value, Wedge Factor. From the verification of the computations of Monitor Unit for 60 patients previously treated, we were able to obtain an error rate of ${\pm}0.028MU$. Computerized calculation of the Monitor Unit could save the burden of Technologist.

• IE interfaces
• /
• v.10 no.1
• /
• pp.155-167
• /
• 1997

The purpose of this study is to develop the program for efficient operation of a multi-functional surface mounting device(SMD) which mount various components on a printed circuit board(PCB). These components are provided by diverse types of feeders such as cassette, stick and tray feeders. The SMD has one or two heads. In the SMD, the positions of PCB and feeders and fixed, and the head moves to pick up a component from a feeder and to mount it on the PCB. The number of lanes occupied by each feeder and the nozzle used for each component can be different. We develop an off-line program to minimize the cycle-time of the SMD by studying the optimal assignment of feeders and the optimal mounting sequence of components. Graphical User Interface(GUI) is also developed. Additionally, we consider the line balancing problem which appears when two SMDs are used sequentially.

• International Journal of Safety
• /
• v.3 no.1
• /
• pp.15-19
• /
• 2004

A new tower internal, which is called CSE, is presented. The CSE is composed of a nozzle perforated in its bottom along the entire periphery and equipped with a multi vane axial swirler at the inlet and hollow cylindrical separator at the outlet of the nozzle. According to the experimental work for obtaining the necessary hydraulic information of the CSE, which is used for preliminary design of a separation column, the CSE showed a stable operation over the wide rage of gas/liquid ratio. However, it caused large pressure drop due to the high gas velocity which should carry liquid droplets through the element. The high pressure drop may cause problems in energy recovery and the application of the CSE can be limited to the high pressure columns. Assuming that the tray efficiency of the CSE is the same with the existing separation columns, the results of the column design showed the size reduction of the column diameters by 30 to $40\%$ and investment cost saving, depending on operating conditions. The application of the CSE to separation column may also contribute to the de-bottlenecking the existing column.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.912-921
• /
• 1993

A small scale solar greenhouse tray dryer suitable for one or few farmer households is designed in place of sunny ground to dry various agricultural products. The tests on the drying of paddy, groundnut and radish slices by this drying unit have been made. The results indicated that this drying unit had a good heat collecting property, a low heat consumption (4518.7-5676.1 KJ per kg water removal) , a high heat utilizing efficiency (43.75%-54,25%) , a low operation cost (0.057 kwh-0.078 kwh per kg water removal) and good drying quality.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1302-1311
• /
• 1993

In the 90 years or so since the beginning of the 20 th century , orchard growing and agricultural fields in Japan have undergone considerable change in terms of production volume, a seen in Fig. 1. as this change in volume progressed, sorting and packing machines have also grown from the first wooden tools, almost too simple to be called " machines" into sophisticated devices that bring together diverse technologies such as machinery , electronics, and optics. Nowadays, Japan/s agricultural industry is facing unprecedentedly serious labor shortage and the rapid aging of its experienced growers and producers, In additions, Japan has changed from a society oriented towards high-volume production and consumption to a more selective society which prefers smaller volume with the tastes of naturally ripended produce. With consumer trends changing there is a new demand on the part of growers for equipment that can not only measure the external quality of produce , but can measure inte nal quality as well.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.877-885
• /
• 1993

Three types of solar grain dryers, namely , the solar grain bin dryer, the solar greenhouse rotary drum dryer and small scale solar green house tray dryer, have been tested. The results showed that each type of solar grain dryer has its feature. These solar drying units have three main advantages : (1) Required commercial energy to remove 1Kg moist from rough rice is only 5.3% to 15.8% of the energy consumed by common heated dryer : 2) The area of solar drying system is only about 10% of the area of the sunny ground to give equal drying capacity ; (3) There are good drying quality in the moisture uniform , germination percentage, and grain color.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1997.12a
• /
• pp.392-400
• /
• 1997

This study was conducted to develope the machine vision system of a robotic transplanter for bedding plants. Specific objectives of this study were 1) to get coordinates of the healthy seedlings except empty cells and bad seedlings in high-density plug tray, and 2) to get the angle of the leaves of the healthy seedlings to avoid damage to the seedlings by gripper. The results of this study are summarized as follows. (1) The machine vision system of a robotic transplanter was developed. (2) The success rates of detecting empty cell and bad seedlings in 72-cell and 128-cell plug trays were 98.8% and 94.9% respectively. (3) The success rates of calculating the angle of leaves in 72-cell and 128-cell plug trays were 93.5% and 91.0% respectively.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1997.12a
• /
• pp.88-98
• /
• 1997

This study was conducted to develope the gripper of a robotic transplanter for bedding plants. Specific objectives of this study were 1) to develope the gripper for plug tray seedlings and 2) to find the suitable finger type for transplanting. The performance of gripper was tested and compared by two different transplanting methods, which were to consider the leaf position of seedlings and not to consider. The results of this study are summarized as follows. (1) The gripper of a robotic transplanter was developed and tested with 4 different finger type. (2) The shovel type finger was suitable for transplanting with the least percent of damaged seedlings.

• Journal of Nutrition and Health
• /
• v.29 no.3
• /
• pp.348-356
• /
• 1996

A survey of one hospital foodservice system in Seoul was undertaken and detailed in formation was collected from 538 patients. Patient satisfaction with the quality of hospital food and food-related service was evaluated by questionnaire survey. It was measured by assessing 24 variables. The effect of medical treatments, age, length of stay and appetite on patients' satisfaction satisfied with the food served, although the variety of food and seasoning of food received the lowest score. The highest rated items were attitude of personnel serving food, the portion size of cooked rice, and the cleanliness of dishes and tray. Younger patients were significantly less satisfied than were older patients. Female patients were significantly more satisfied nificantly more satisfied than were other patients. Medical treatments, age, length of stay of stay and appetite were found to be significantly correlated with patient satisfaction scores. Foodservice attributes for improvement were taste of meals, selection and variety of food and temperature of food.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.397-399
• /
• 2001

레이저를 이용한 마킹(marking) 시스템은 미러(mirror)를 움직이는 XY Scanner안 모터의 Thermal drift로 인한 오차와 laser 오류에 의해 마킹의 불량을 초래하게 된다. 따라서, 이 마킹 불량을 검사하기 위해 마킹 시스템에는 비젼(Vision)을 이용한 검사 장비가 탑재된다. 현재 웨이퍼 마킹기나 다른 마킹기의 비젼시스템은 후검사(post vision) 시스템을 도입하고 있다. 하지만, 후검사 시스템의 경우 마킹이 잘못되었을 때, 바로 마킹을 중지하지 못하고 적어도 한 단위 마킹(tray, 웨이퍼, Strip, PCB 등등)을 망치게 되고, 만일 마킹 대상물이 고가인 경우 상당한 금액의 손실을 가져오는 단점을 가지고 있다. 이러한 단절을 보완하기 위해 본 논문에서는 CPVS(Concurrent Processing Vision System)라는 시스템을 구현하였다. 이 시스템은 마킹과 마킹 품질검사를 동시에 병행함으로써 마킹이 잘못되었을 때 마킹을 중단하게 되어 더 이상의 손실이 나지 않게 하고 후처리 검사 시스템으로의 이송과정을 생략함으로써 processing time을 줄이고, 생산성을 높인다는 장점을 가지게 된다. 이 시스템의 구현은 Visual C++의 MFC 라이브러리를 사용한 MDI구조로 구현하였다.