• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.203-211
• /
• 2001

This paper presents load transfer efficiency of skewed transverse joint of jointed concrete pavement with the fatigue model test. A 1/12 scale model was used to satisfy the geometry, loading, material similitude, which are variables to the skew angel of transverse joint. As the test results by fatigue load 700kgf applied, the deflection and stress of transverse joint were decreased as to increasing of skew angle of transverse joint. In addition, load transfer efficiency of transverse joint with skew angle is better than the load transfer efficiency of transverse joint without skew angle.

• Earthquakes and Structures
• /
• 제7권5호
• /
• pp.705-718
• /
• 2014

This paper presents an analytical model for determining the transverse reinforcement required for reinforced concrete exterior beam-column joints subjected to reversed cyclic loading. Although the joint aspect ratio can affect joint shear strength, current design codes do not consider its effects in calculating joint shear strength and the necessary amount of transverse reinforcement. This study re-evaluated previous exterior beam-column joint tests collected from 11 references and showed that the joint shear strength decreases as the joint aspect ratio increases. An analytical model was developed, to quantify the transverse reinforcement required to secure safe load flows in exterior beam-column joints. Comparisons with a database of exterior beam-column joint tests from published literature validated the model. The required sectional ratios of horizontal transverse reinforcement calculated by the proposed model were compared with those specified in ACI 352R-02. More transverse reinforcement is required as the joint aspect ratio increases, or as the ratio of vertical reinforcement decreases; however, ACI 352R-02 specifies a constant transverse reinforcement, regardless of the joint aspect ratio. This reevaluation of test data and the results of the analytical model demonstrate a need for new criteria that take the effects of joint aspect ratio into account in exterior joint design.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권1호
• /
• pp.199-206
• /
• 2003

This paper presents the fatigue life of transverse joint of concrete pavement with the fatigue model test. A 1/12 scale model was used to satisfy the geometric load, material similitude, which are variables to the skew angel of transverse joint. From the test results by fatigue load 700kgf applied, we can have that the fatigue life of transverse joint with skew angle is better than that of transverse joint without skew angle. In addition, we can have that the fatigue life of skewed transverse joint with angle of 10 degree is better than that of skewed transverse joint with angle of 20 degree.

• Structural Engineering and Mechanics
• /
• 제78권5호
• /
• pp.623-635
• /
• 2021

Previous studies have suggested the maximum experimental story shear force of beam-column joint frame does not reach its theoretical value due to beam-column joint failure when the column-to-beam moment capacity ratio was close to 1.0. It was also pointed out that under a certain amount of axial force, an axial collapse and a sudden decrease of lateral load-carrying capacity may occur at the joint. Although increasing joint transverse reinforcement could improve the lateral load-carrying capacity and axial load-carrying capacity of beam-column joint frame, the conditions considering varying axial force were still not well investigated. For this purpose, 7 full-scale specimens with no-axial force and 14 half-scale specimens with varying axial force are designed and subjected to static loading tests. Comparing the experimental results of the two types of specimens, it has indicated that introducing the varying axial force leads to a reduction of the required joint transverse reinforcement ratio which can avoid the beam-column joint failure. For specimens with varying axial force, to prevent beam-column joint failure and axial collapse, the lower limit of joint transverse reinforcement ratio is acquired when given a column-to-beam moment capacity ratio.

• 한국해양공학회지
• /
• 제13권3호통권33호
• /
• pp.57-67
• /
• 1999

Welding is widely applicable and reliable process and is mainly adopted for fabricating heavy structures. Recently, weld metal transverse cracks in butt and fillet weld joint is a serious problem, and they must be eliminated for improving weld joint reliability. The weld metal transverse crack susceptibility of butt and fillet joint was carried out by cantilever type tensile crack testing jig and CTS test. In this view of point, this study investigated the potential factors for weld metal transverse crack. The main results obtained were as follows: 1. The content o fdiffusible hydrogen in weld metal played an important role for weld metal transverse cracks. 2. From cantilever type tensile crack tests, it was pointed out that the higher the diffusible hydrogen content and tensile restraint, the more susceptible to weld metal transverse craking. 3. The TSN(thermal severity number) and diffusible hydrogen were important factors for determining weld metal transverse cracks in fillet weld joints.

• 한국해양공학회지
• /
• 제13권3호통권33호
• /
• pp.49-56
• /
• 1999

Welding is a reliable process and is mainly adopted for fabricating heavy structures. Recently, transverse cracks in the weld metal is serious problem, and they affect cost, efficiency, safety and joint reliability for various welded structures. In this view of point, this study investigated the potential factors for weld metal transverse crack. The main results obtained are as follows; 1) The content of diffusible hydrogen in the commercial flux cored are welding wire was remarkable change by manufacturer. 2) The diffusible hydrogen content was thd main factor for weld metal transverse cracks. 3) Weld metal was immune to transverse cracking under the condition of low diffusible hydrogen content of high restraint condition. 4) The factors for weld metal transverse crack would be the content of diffusible hydrogen and restraint of weld joint.

• 대한족부족관절학회지
• /
• 제15권1호
• /
• pp.1-6
• /
• 2011

Purpose: The purpose of this study was to compare the clinical and radiological results of single and double fusions in the transverse tarsal joint. Materials and Methods: Between December 2000 and April 2009, 16 patients (16 feet) who had been treated by fusion of transverse tarsal joint were included in this study. In 8 patients, only talonavicular joint was fused and in the other 8 patients, both talonavicular and calcaneocuboid joints were fused simultaneously. We have measured talo-first metatarsal angle, calcaneal pitch angle, talonavicular coverage angle and presence of adjacent joint arthritis for radiological assessment at both preoperative and last visit. Furthermore, we have evaluated Visual Analogue Scale (VAS), American Orthopaedic Foot and Ankle Society (AOFAS) score and patient's satisfaction. Results: In a single fusion group, VAS was improved from $6.4{\pm}1.4$ to $0.8{\pm}1.0$ (p=0.0011) and AOFAS score was improved from $63.8{\pm}6.2$ to $89.4{\pm}9.8$ (p=0.0012). In a double fusion group, VAS was improved from $8.0{\pm}0.75$ to $2.0{\pm}1.8$ (p=0.0011) and AOFAS score was improved from $60.5{\pm}11.2$ to $89.5{\pm}6.0$ (p=0.0012). In the difference of talo-first metatarsal angle between two groups, a single fused group was more improved than a double fused group (p=0.04). Conclusion: Both single and double fusions are useful and attractive treatment for the transverse tarsal joint arthritis. Furthermore, a single fusion has advantages of less invasiveness and preserving some degree of hindfoot motion and could be an effective alternative to a double fusion if patient meets appropriate criteria through careful preoperative evaluation.

• Journal of Welding and Joining
• /
• 제5권3호
• /
• pp.46-52
• /
• 1987

The mechanism of transverse shrinkage for the butt joint weldig of plates is investigated in this paper. It was certified that the compressive plastic strain due to thermal expansion of materials during heating play an important role on the transverse shrinkage. It was also pointed out that the transverse shrinkage has to be treated with the samples of which the shapes are as close to real shapes of welded materials as possible, because the distribution of temperature and relative rigidity of materials during welding have great influence on the transverse shrinkage. The formulas for the calculation of transverse shrinkage were presented and the experiments were carried out in order to verify the formulas. the main results are as follows; 1. For the bead-on-plate welding, the transverse shrinkage in the begining parts of welding is the smallest, the end parts is next and the transverse shrinkage of mid section is the largest. 2. In bead-on-plate welding, the equations presented in this paper concerning transverse shrinkage coincide fairly well with the experimental values generally. 3. Transverse shrinkage increases generally as specific heat input per unit thickness increaes.

• KCI Concrete Journal
• /
• 제14권2호
• /
• pp.69-75
• /
• 2002

This is the second of two part series on experimental studies of grout type transverse joints. In this paper, grout-type transverse joints between precast concrete slabs are tested to study the fatigue behavior. The tests are per-formed with loading equipment designed and constructed especially in the lab to introduce shear fatigue failures on the joints of the test specimens with repeated loads. Non-prestressed as well as prestressed specimens are selected based on static tests and these specimens are studied to identify the effect of prestress on the fatigue strength of the grout type joint. A comparison between prestressed and non-prestressed specimens indicates that longitudinal prestressing is an effective method to increase fatigue strength of the transverse joints. Based on the fatigue test, a rational estimation of the fatigue strength is proposed to aid design of the grout-type transverse joints.

• PNF and Movement
• /
• 제6권3호
• /
• pp.29-35
• /
• 2008

Purpose : To describes the important aspects of the foot and ankle movement and function used when git and balance strategy. Method : The foot and ankle was a very important roles in the lower limb movement and gait. This study summarizes the physiologic movement of knee to the PNF lower extremity patterns. Result : The ankle joint composed of the talocural joint, the subtalarl joint, transverse tarsal joint, talocalcaneonavicular joint. The onset of dorsiflexion muscle activity starts in pre swing gait patterns. First contract muscle is the extensor hallucis. Activity of tibialis anterior and extensor digitorum longus quickly follows in mid swing gait phase. During stance phase, the soleus and gastrocnemius muscle provided plantar flexor torque, which muscle reacts quickly to restrain ankle dorsiflexion, and contributes modulated control of the ankle motion in gait patterns. Conclusions : The understanding of ankle kinematics, could provide a good therapeutic approach for improving gait patterns in patients with various pathological condition.