• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.2
• /
• pp.95-109
• /
• 1996

In automobile industry, the depot (distribution center) system is utilized to adjust the inventory and to supply the demands to the firm timely. In case of the small lot demands of short delivery cycle and the long distance from the parts manufacturing to the firm, the depot system is very important. In this paper, a model to minimize the sum of costs of holding, inventory and transportation, is proposed to determine the optimal quantities of production and transportation in JTT system. Finally, computational results that verify the effectiveness of the proposed model are demonstrated.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.3
• /
• pp.390-396
• /
• 2007

Fuzzy-CBR Collision Avoidance Support System is a system that finds a solution from past knowledge retrieved from the database and adapted to a new situation. Its algorithm has resulted to an adapting a solution for a new situation. However, ontology is needed in identifying concepts, relations and instances that are involved in a situation in order to improve and facilitate the efficient retrieval of similar cases from the CBR database. This paper proposes the way to apply ontology for identifying the concepts involved in a new environment and use them as inputs, for a ship collision avoidance support system., Similarity will be obtained through document articulation and using abstraction levels. A conceptual model of a maneuvering situation will be built using these ontologies.

• Journal of Korean Society of Transportation
• /
• v.11 no.3
• /
• pp.49-66
• /
• 1993

The successful management of logistics in an organization requires the careful coordination and manipulation of both movement and storage. In this study, we can show what is the most efficient and the cheapest method to transport the petroleum products under a few constraints with the model of linear programming. And also, the model can give some important informations so as what is the best coverages of each terminals by types, how many products should be exchanged among each companies and which terminals or complexes are economically prior to the others. Even we can understand that the duality is one of the useful measures to evaluate the economical efficiencies of transportation and storage related elements such as complex and terminal location, transport mode, storage tankage capacity and in/outflow facilities of terminals etc.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.489-492
• /
• 2016

Transportation in the logistics, many business organizations are engaged in monitoring and tracking the vehicles in order to improve logistics services, reduce expenses and secure security in cargo transportation. It is saving time and money by tracking and monitoring vehicles which transport cargo in supply chain of logistics. Therefore the main issue of delivery flow is to improve services, and ensure the safety in transportation system. This article suggests the tracking and monitoring model to keep safety transports on ICT network. It focuses on precise delivery control by monitoring and tracking vehicles to save time and costs. The status of product movement is analyzed for proper decision making. The vehicle embedded with RFID is automatically tracked in the movement process by tracking and monitoring model. The main role keeps safety tracking to reduce costs and to deliver products at proper time and location.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.3
• /
• pp.23-33
• /
• 2016

This study identified the factors that affect travel time budget by mode for traveler in Seoul using the SUR model. Individual, household and TAZ characteristics were selected as the explanatory variables. Transportation modes are summarized from 18 types to 6 types(walking, personal car, bus, subway, rail and bicycle). The results showed a distinct difference between personal transportation and public transportation. First of all, People who owned a car and driver's licence tend to prefer personal transportation. In addition, we can confirm the relationship between the bus and the subway which are most typical public transportation. Passengers who can available a personal mode preferred the subway than the bus. It is expected to suggest various implications related to the public transportation policy for Seoul metropolitan area.

• Wind and Structures
• /
• v.27 no.4
• /
• pp.255-267
• /
• 2018

This paper investigated the wind-snow flow around the bogie region of a high-speed train under crosswinds using a coupled numerical method of the unsteady Realizable $k-{\varepsilon}$ turbulence model and discrete phase model (DPM). The flow features around the bogie region were discussed and the influence of bogie fairing height on the snow accumulation on the bogie was also analyzed. Here the high-speed train was running at a speed of 200 km/h in a natural environment with the crosswind speed of 15 m/s. The mesh resolution and methodology for CFD analysis were validated against wind tunnel experiments. The results show that large negative pressure occurs locally on the bottom of wheels, electric motors, gear covers, while the positive pressure occurs locally on those windward surfaces. The airflow travels through the complex bogie and flows towards the rear bogie plate, causing a backflow in the upper space of the bogie region. The snow particles mainly accumulate on the wheels, electric motors, windward sides of gear covers, side fairings and back plate of the bogie. Longer side fairings increase the snow accumulation on the bogie, especially on the back plate, side fairings and brake clamps. However, the fairing height shows little impact on snow accumulation on the upper region of the bogie. Compared to short side fairings, a full length side fairing model contributes to more than two times of snow accumulation on the brake clamps, and more than 20% on the whole bogie.

• Journal of Korean Society of Transportation
• /
• v.32 no.2
• /
• pp.152-161
• /
• 2014

The total boarding and alighting time models have been developed by applying the multiple regression analysis with three variables; numbers of boarding or alighting passengers, non-sitting passengers, and the step-height from the ground. Such variables have influenced to the total boarding time model with the most influential in the numbers of boarding or alighting passengers and the least in the step-height. On the total alighting time model, the numbers of alighting passengers are the most strongest while the step-heights the least. The total boarding and alighting time models can be used in practices for the prediction of current and future bus stops' capacities in TOD-based towns.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.2
• /
• pp.55-60
• /
• 2010

The purpose of this study is to analyze compact city planning indicators that have influence on public transportation commuting of residents in the 54 medium and small-sized cities. In the study, land use and transportation infrastructure of cities and other socio-demographic variables are used as explanatory variables in a causal model. 96,552 subjects from 54 cities in korea are selected as the final sample, and a statistical analysis is carried out by applying Random Intercept Logit Model. Analysis shows that a high level of density and jobs-housing balance in the city results in more public transportation commuting. And higher access to bus and subway station influence commuting, so subway & bus stop are important factors to increase public transportation commuting

• Steel and Composite Structures
• /
• v.25 no.1
• /
• pp.117-126
• /
• 2017

The component method is an analytical approach for investigating the moment-rotation relationship of steel connections. In this study, the component method was improved from two aspects: (i) load analysis of mechanical model; and (ii) combination of spring elements. An optimized component method with more reasonable component models, spring arrangement position, and boundary conditions was developed using finite element analysis. An experimental testing program in two major-axis and two minor-axis connections under symmetrically loading was carried out to verify this method. The initial rotational stiffness obtained from the optimized component method was consistent with the experimental results. It can be concluded that (i) The coupling stiffness between column and beam flanges significantly affects the effective height of the tensile-column web. (ii) The mechanical properties of the bending components were obtained using an equivalent t-stub model considering the bending capacity of bolts. (iii) Using the optimized mechanical components, the initial rotational stiffness was accurately calculated using the spring system. (iv) The characteristics of moment-rotation relationship for beam to column connections were effectively expressed by the SPRING element analysis model using ABAQUS. The calculations are simpler, and the results are accurate.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.3
• /
• pp.318-328
• /
• 2018

Disk type underwater gliders are a new type of underwater gliders and they could glide in various directions by adjusting the internal structures, making a turnaround like conventional gliders unnecessary. This characteristic of disk type underwater gliders makes them have great potential application in virtual mooring. Considering dynamic models of conventional underwater gliders could not adequately satisfy the motion characteristic of disk type underwater gliders, a nonlinear dynamic model for the motion simulation of disk type underwater glider is developed in this paper. In the model, the effect of internal masses movement is taken into consideration and a viscous hydrodynamic calculation method satisfying the motion characteristic of disk type underwater gliders is proposed. Through simulating typical motions of a disk type underwater glider, the feasibility of the dynamic model is validated and the disk type underwater glider shows good maneuverability.