• Korean Journal of Construction Engineering and Management
• /
• v.17 no.1
• /
• pp.101-109
• /
• 2016

During road construction, minimizing haul and return distances as well as keeping a balance between cut and fill quantities are two of the key tasks for earthmoving operation planning. The result of the earthwork planning has a significant impact on the construction cost and duration. Although there have been research efforts regarding optimized earthwork planning using linear programming, the current practice of selecting earthwork planning methods typically depends on a field manager's intuitive and/or experimental knowledge. Furthermore, there is no system considering earthwork influential field factors including the transportation distance, the earthwork quantity, and the recycling ratio of earth volume. Therefore, this research focuses on the development of such a model for planning the optimized earthwork to increase the efficiency of a road construction. The proposed model is developed based upon the transportation problem method which is a part of Linear Programming. The application result of optimization model on a case study shows that the duration and cost for earthwork ha sbeen reduced approximately 19% and 11% respectively

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5321-5329
• /
• 2011

Space Layout has been an issue in the facet of reducing the co2 in that the transportation sector has been to represent almost more than 20% of the total energy consumption for decades. Beside the development of the more efficient transportation systems, an efficient space layout makes it possible to reduce the amount of energy consumption in the transportation sector through allocating the sub-spaces in such an arrangement of minimizing the travel distances. In line with this thinking, this research aims at implementing a simulator which can calculate the vehicle-based travel distance upon a certain space layout. Based on the findings that the vehicle-based travels take place between the two functionally related sub-spaces, this research addresses a method of calculating the vehicle-based travel distance by multiplying the traffic volume of each sub-spaces by the travel distance to the other connected sub-spaces.

• Journal of the Economic Geographical Society of Korea
• /
• v.21 no.4
• /
• pp.335-349
• /
• 2018

This study analyzes the effect of the changes in traffic environments such as transportation speeds on the time-distance accessibility for the public transportation passengers. To do this, we use passenger transaction databases of the Seoul metropolitan public transportation system: one week for each of the three years (2011, 2013, and 2015). These big data contain the information about time and space on the traffic trajectories of every passenger. In this study, the time-distances of links between subway stations and bus stops of the public transportation system at each time are calculated based on the actual travel time extracted from the traffic-card transaction database. The changes in the time-distance accessibility of the integrated transportation network from the experimental results can be summarized in two aspects. First, the accessibility tends to decline as the year goes by. This is because the transportation network becomes more complicated and then the average moving speed of the vehicles is lowered. Second, the accessibility tends to increase on the weekend in the analysis of accessibility changes by day. This tendency is because the bus speeds on bus routes on the weekend are faster than other days. In order to analyze the accessibility changes, we illustrate graphs of the vehicle speeds and the numbers of passengers by year and day.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.127-134
• /
• 2011

A traffic accident which happens in Expressway during dense fog is more likely to cause the sequential accidents and high death rate. So, the preventive measures shall be taken at dangerous areas to enhance the efficiency of roads and minimize the accidents and the resultant damages. So, it is necessary to find out the characteristics of freeway zone which has high risk of fog occurrence and to establish the comprehensive safety strategy on installation and operation of the safety equipment. In this study, I developed a fog forecasting model by using the freeway fog data. This model can be used as the fog forecasting model in dealing with fog problems when new road is planned. The model was developed by using a statistical analysis technique or the regression analysis, focusing on the variables such as geographical features and regional conditions, distances to water sources and the area of water source. I have segmented the models by classifying the area into inland area and coastal area. The distance to water source and area of the water source located around the freeway were found to be main factors causing fog.

• Journal of the Korean Institute of Navigation
• /
• v.7 no.2
• /
• pp.65-113
• /
• 1983

A lot of studies of ship's economy are on the traditional fields such asreducing propulsion resistance, raising cargo handling rates and lessening building consts, but there are few researches on the merchant ship's economy concerning their deadweights and speeds according to shipping companies managerial cercumstances. Contrary to the contemporary trend that "the bigger, the better, if the cargo handling rate could increased sufficiently to hold down port time to that rate of smmaler vessels", this paper demonstrates the existence of certain limits in ship's size and speed according to the coditions of the freight rates, voyage distances, cargo handing rates, prices of fuel oil, interst rates etc. Fom the curves of criteria contour for various ship's deadweights and speeds which are depicted from the gird search method, one can get the costs and the yearly profit rates under the conditiions of large volume with long term contracts for the transportation of bulk cargoes. In estimating ship's transportation economy, the auther takes the position that the profit rate method is properer than the cost method, and introduces the calculation table of the voyage profit rate index. The use of the criteria contours will be of help to ship owners in determining the size and speed of the ship which will be built or purchased and serve in a certain trade route.

• Journal of the Korean Institute of Navigation
• /
• v.8 no.1
• /
• pp.17-48
• /
• 1984

The economy of ship's size and speed is affected by the freight rates, sailing distances, cargo handling rates, fuel oil prices and even interest rates of the borrowed funds. It can be a step more powerful measures if the economic evaluation model takes in a cargo lot size which prevails in the shipping markets. This paper has dealt with hypothetical cargo lots which happen to the market with uniform distribution in probability. The evaluation models are either profit maximization method or cost minimization method. The former compares among different voyages in profitability to the invested funds, the later defines the transportation efficiency in ton-mile unit and be used in comparing two or more transportation means. This paper adopted both of above methods to derive out ships economical evaluation contours for the various ship's speed and deadweight for certain cargo lot sizes, which can be used as important managerial decision data in purchasing ships or selecting a most profitable one among the proposed voyages. This evaluation contours will also be efficiently used in appraising so called "handy size ships" in connection with port water depth and conditions of voyage tracks.ge tracks.

• Journal of Institute of Convergence Technology
• /
• v.6 no.1
• /
• pp.7-11
• /
• 2016

An experiment was performed to show the bio-signal characteristics of the Stuckyi when was heated. To measure the bio-signal of the plant, this study used the electrode with copper(+) and constantan(-). The electrode was directly inserted into the Stuckyi stems. And used T-type thermocouple to measure the inside temperature of the Stuckyi. During the experiments, room temperature also measured with T-type thermocouple. Heating was made with hair dryer periodically that 3 times turned on for heating 5 min and off for non-heating 25 min. Under the situation, the responses of the Stuckyi including voltage potential and inside temperature were measured using data logger(HP-34970A) according to the distances(15cm, 30cm, 45cm) between hair dryer and the plant. Through the experiments, We knew that the inside temperature has similar level and behavior with the room temperature at normal state. And during heating period, the inside temperature and the potential were also simultaneously increased sharply. From the experiments, we revealed that the measuring system of bio-signal of the plant being proposed in this study can be useful to show the Characteristics of the plants.

• Journal of the Korean Society of Safety
• /
• v.34 no.2
• /
• pp.28-33
• /
• 2019

After the Tianjin Port explosion on 2015, it is highlighted that securing safety for dangerous goods in Korea and try to establish safety standards for railroad dangerous substances transport. In Korea, the regulation for the transport of dangerous goods is stipulated to need 3 buffer cars. However, It is inefficient that 3 buffer cars. because 3 buffer cars, increase transportation too much costs in transit and it is too strict compared to other country rules. The purpose of this study was to improve transportation efficiency by mitigating the criteria for isolated railroads through rational safety assessment. In order to verify this, we used a risk assessment software which is PHAST 7.2 developed by DNV GL. We calculated safety distances that could prevent ignitions setting up scenarios when relief system work installed on a train loaded with propylene, nonane. As a result, we confirmed that buffer cars can be reduced from three to one. This result would be implemented in the application of Korail.

• Proceedings of the KOR-KST Conference
• /
• 1996.02a
• /
• pp.59-86
• /
• 1996

Current methods for evaluating unsignalized intersections, and estimating level-of-service (LOS) is determined from efficiency-based criteria such as little or no delay to very long delays. At present, similar procedures to evaluate intersections using safety-based criteria do not exist. The improvement of sight distances at intersections is the most effective way of improving intersection safety. However, a set of procedures is necessary to account for the limitations in current methodology. Such an approach would build upon such methods, but also account for: deficiencies in the current deterministic solution for the determination of intersection sight distances; opportunity for an accident and severity of an accident; and cost-effectiveness of attaining various levels of sight distances. In this research, a model that estimates the degree of safety at two-way stop-controlled intersections is described. Only crossing maneuvers are considered in this study because accidents caused by the crossing maneuvers are the dominate type among intersection accidents. Monte Carlo methods are used to estimate the hazard at an intersection as a function of roadway features and traffic conditions. Driver`s minimum gap acceptance in the crossing vehicles and headway distribution on the major road are used in the crossing vehicles and headway distribution on the major road are used in the model to simulate the real intersectional maneuvers. Other random variables addressed in the model are: traffic speeds; preception-reaction times of both drivers in the crossing vehicles and drivers in oncoming vehicles on the major road; and vehicles on the major roads. The developed model produces the total number of conflicts per year per vehicle and total potential kinetic energy per year per vehicle dissipated during conflicts as measurements of safety at intersections. Based on the results from the developed simulation model, desirable sight distances for various speeds were determined as 350 feet, 450 feet and 550 feet for 40 mph, 50 mph and 60 mph prevailing speed on the major road, respectively. These values are seven to eight percent less than those values recommended by AASHTO. A safety based level-of-service (LOS) is also developed using the results of the simulation model. When the total number of conflicts per vehicle is less than 0.05 at an intersection, the LOS of the intersection is `A' and when the total number of conflicts per vehicle is larger than 0.25 at an intersection, the LOS is `F'. Similarly, when the total hazard per vehicle is less than 350, 000 1b-ft2/sec2, the LOS is `F'. Once evaluation of the current safety at the intersection is complete, a sensitivity analysis can be done by changing one or more input parameters. This will estimate the benefit in terms of time and budget of hazard reduction based upon improving geometric and traffic characteristics at the intersection. This method will also enable traffic engineers in local governments to generate a priority list of intersection improvement projects.

• Journal of Korea Port Economic Association
• /
• v.28 no.2
• /
• pp.43-59
• /
• 2012

Recently, there has been a noticeable increase in the number of tourists in islands that are well-known for their natural landscapes. It is expected that this number will go up steadily, due to the increase in per capita income and leisure time. Regarding tourism transportation, utilizing linkage transport between coastal passenger terminal and inland transport system is crucial. However, the existing system does not measure up to the expectations. This is attributable to the fact that the distances between coastal passenger terminals and inland transportation terminals are too far. Also, the current public transportation system lacks support and needs to take the role of connecting the two terminals. This study shows how coast-inland linkage transport system should be reformed in order to promote island tourism. It focuses on building linkage transport system and minimizing walking distance. Also, adjusting passenger ship schedule to the characteristics of island tourism is needed. For the sake of passengers, coastal passenger ship fare should be reduced, and integrated transport information should be provided.