• Advances in aircraft and spacecraft science
• /
• v.9 no.4
• /
• pp.319-333
• /
• 2022

This work presents a numerical investigation of the aerodynamics and aero acoustics of the HVAB rotor in hover conditions. Two fully turbulent models are employed, the one-equation Spalart-Allmaras model and the two-equation k-ω SST model. Transition effects are investigated as well using the Langtry-Menter γ-Re θt transition transport model. The noise generation and propagation are being investigated using the Ffows-Williams Hawking model for far-field noise and the broadband model for near-field noise. Comparisons with other numerical solvers and with the PSP rotor test data are presented. The results are presented in terms of thrust and power coefficients, the figure of merit, surface pressure distribution, and Sound pressure level. Velocity, pressure, and vortex structures generated by the rotor are also shown in this work. In addition, this work investigates the contribution of different blade regions to the overall noise levels and emphasizes the importance of considering specific areas for future improvements.

• Journal of the Korean Society of Groundwater Environment
• /
• v.2 no.1
• /
• pp.14-21
• /
• 1995

Colloids such as exogenous biocolloids in a bioremediation operation can enhance the transport of contaminant in ground water by reducing retardation effects. Because of their colloidal size and favorable surface conditions in addition to their low density, bacteria can act as efficient contaminant carriers. When mobile bacteria are present in a subsurface environment, the system can be treated as consisting of three phases: water phase, bacterial phase, and the stationary solid matrix phase. In this work, a mathematical model based on mass balances is developed to describe the facilitated transport and fate of a contaminant in a porous medium. Bacterial partition between the bulk solution and the stationary solid matrix, and the contaminant partition among the three phases are represented by the equilibrium relationships. Solutions were obtained to provide estimates of contaminant and bacterial concentrations. A dimensionless analysis of the transport model was utilized to estimate model parameters from the experimental data. The model results matched with experimental data of Jenkins and Lion (1993). The presence of mobile bacteria enhances the contaminant transport. However, bacterial consumption of the contaminant which serves as a bacterial nutrient, can attenuate the contaminant concentration.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.319-324
• /
• 2020

Electroconvective instability is a non-linear transport phenomenon which can be found in ion-selective transport system such as electrodialysis, Galvanic cell and electrolytic cell. The instability is triggered by the fluctuation of space charge layer in adjacent of ion-selective surface, leading to increase of mass transport rate. Thus, in the aspect of mass transport, the instability has an important meaning. Although recent experimental techniques have opened up an avenue to direct visualize the instability, fundamental investigations have been conducted in limited area due to several experimental limitations. In this work, the electroconvective instability under potentiostatic mode was solved by numerical method in order to demonstrate correlation between current-time curve and the instability behavior. By rigorous time-resolved analysis, the transition behaviors can be divided into three stages; formation of space charge layer - growth of electroconvective instability - steady state. Furthermore, scaling laws of transition time were numerically obtained according to applied voltage as well.

• The Korean Journal of Air & Space Law and Policy
• /
• v.23 no.1
• /
• pp.3-32
• /
• 2008

In proportion to recent developments in aviation technology and growth of the air transport market, the risk of damages to third parties caused by aircrafts and the likelihood of unlawful interference on an aircraft in flight has grown larger. The war risk insurance market was paralyzed by the 9/11 terror event. And if another event on the scale of 9/11 occurs, compensations for third party damages will be impossible. Recognizing the need to modernize the existing legal framework and the absence of a globally accepted authority that deals with third party liability and compensation for catastrophic damage caused by acts of unlawful interference, the ICAO and various countries have discussed a liability and compensation system that can protect both third party victims and the aviation industry for the 7 years. In conclusion, in order to provide adequate protection for victims and the appropriate protection for air transport systems including air carriers, work on modernizing the Rome Convention should be continued and the new Convention should be finalized in the near future. Korea has not ratified the relevant international treaties, i.e. Rome Convention 1933, 1952 and 1978, and has no local laws which regulate the damage caused by aircraft to third parties on land. Consequently, it has to depend on the domestic civil tort laws. Most of the advanced countries in aviation such as the United States, England, Germany, France and even China, have incorporated the International Conventions to their national air law and governed carriers third party liability within their jurisdiction. The Ministry of Justice organized the Special Enactment Committee for Air Transport chapter under Commercial Law. The Air Transport chapter, which currently includes third party liability, is in the process of instituting new legislation. In conclusion, to settle such problems through local law, it is necessary to enact as soon as possible domestic legislation on the civil liability of the air carrier which has been connected with third party liability and aviation insurance.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.1
• /
• pp.157-166
• /
• 2022

In this study, The goal is to analyze the feasibility of introducing a Piggyback system that can reduce the time and cost incurred by transshipment work and improve the transportation speed when transporting complex cargo by rail. To this end, the feasibility analysis methodology is reviewed through domestic and international literature review. In order to quantitatively derive the feasibility analysis values, a transportation database was applied to develop a freight transport simulation model and a freight demand prediction model for major freight transport O-D routes with a transportation distance of 200 km or more. As a result of analyzing economic feasibility by setting the analysis period to 15 years on the premise that the Piggyback System will be introduced on major cargo transport O-D routes in 2025, the NPV value was positive and the B/C value was 1.18, indicating that the Piggyback system was economical. The proposed research method can be meaningful data for establishing transportation policies that can improve the competitiveness of railroad transportation.

• Safety and Health at Work
• /
• v.13 no.1
• /
• pp.117-125
• /
• 2022

Background: External-cause mortality is an important public health issue worldwide. Considering its significance to workers' health and inequalities across industries, we aimed to describe the state of external-cause mortality and investigate its difference by industry in Republic of Korea based on data for 2018. Methods: Data obtained from the Statistics Korea and Korean Employment Information System were used. External causes of death were divided into three categories (suicide, transport accident, and others), and death occurred during employment period or within 90 days after unemployment was regarded as workers' death. We calculated age- and sex-standardized mortalities per 100,000, standardized mortality ratios (SMRs) compared to the general population and total workers, and mortality rate ratios (RRs) across industries using information and communication as a reference. Correlation analyses between income, education, and mortality were conducted. Results: Age- and sex-standardized external-cause mortality per 100,000 in all workers was 29.4 (suicide: 16.2, transport accident: 6.6, others: 6.6). Compared to the general population, all external-cause and suicide SMRs were significantly lower; however, there was no significant difference in transport accidents. When compared to total workers, wholesale, transportation, and business facilities management showed higher SMR for suicide, and agriculture, forestry, and fishing, mining and quarrying, construction, transportation and storage, and public administration and defense showed higher SMR for transport accidents. A moderate to strong negative correlation was observed between education level and mortality (both age- and sex-standardized mortality rates and SMR compared to the general population). Conclusion: Inequalities in external-cause mortalities from suicide, transport accidents, and other causes were found. For reducing the differences, improved policies are needed for industries with higher mortalities.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.2
• /
• pp.48-61
• /
• 2020

The objective of this study is to estimate traffic capacity based on the heavy-vehicle ratio in a two-lane freeway work zone where one lane is blocked by construction. For this, closed circuit television (CCTV) video data of the freeway work zone was collected, and the congestion at an upstream point was observed. The traffic volume at a downstream point was analyzed after a bottleneck was created by the blockage due to the upstream congestion. A distribution model was estimated using observed-time headway, and the road capacity was analyzed using a goodness-of-fit test. Through this process, the general capacity and an equation for capacity based on the heavy-vehicle ratio passing through the work zone were presented. Capacity was estimated to be 1,181~1,422 passenger cars per hour per lane (pcphpl) at Yeongdong, and 1,475~1,589pcphpl at Jungbu Naeryuk. As the ratio of heavy vehicles increased, capacity gradually decreased. These findings can contribute to the proper capacity estimation and efficient traffic operation and management for two-lane freeway work zones that block one lane due to a work zone.

• Journal of Korean Port Research
• /
• v.7 no.1
• /
• pp.43-58
• /
• 1993

There has been fast progress in economy in Korea derived by a consecutive five-year plan program for economic development started in the early 1960's. In the field of transportation, rapid changes in the technological environment of transportation and communication have brought a revolution of the transport system, of which inter-modal transportation through containerisation is typical. Because of the rapidly growing traffic volumes of cargo, especially container traffic, and lack of investment into transport infrastructure in the past, both road and railway are beyond their capacity. As a result, the public-road network has suffered a serious congestion problem. For instance, in relation to the corridor between Seoul and Pusan, today, it takes about 14 hours for the journey of container trailer through Kyongbu Expressway, for which it used to take only 7 hours in 1986. For the railway, though the congestion problem is not very serious compared with the road sector, a shortage of capacity on certain main lines has emerged as a problem as railway traffic has increased. Furthermore, the further expansion of the system in near future is difficult due to burden of higher construction the cost. Unlike these two modes, coastal shipping, which has been paid relatively less attention for commodity transport in Korea, shows no constraint in this respect. In addition, it is the most cost efficient mode of transport. This work therefore aims to make a proposal for the alternative inland transportation mode, which is to promote the coastal transport of container. Three obstructing factors for the promotion of the coastal transport are investigated and some solutions for those are suggested as follows : First, it appears to be essential to provide exclusive ports for the coastal shipping, that comply with simplification, specialization and rationalization. The optimum size of berths on the exclusive ports in Pusan port is estimated as 16-20. We found that it needs periodical study and publicity on the advantages from the adoption of the coastal mode. Inducing competition in the coastal shipping market is also necessary. For the supply of the fleet in the coastal shipping, chartering of the surplus ships in the oversea shipping is found to be more desirable than new shipbuilding. Second, to solve the fragmentation of the companies which wish to participate in the coastal transport, government has to implement the subsidy policy. The encouragement of participation of the shipping lines engaging in Korea-Japan run and Korea-East South Asia run, into coastal shipping also needs to be considered cautiously. Third, simplification of the document for entry in ports is needed for rational coastal shipping management. We can use B/L (Bill of Lading) for coastal shipping as a prerequisite to get the indemnity by P & I Club. The reduction of the government controls on entering and leaving the ports also needs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.351.2-351.2
• /
• 2014

Indium tin oxide (ITO) has a lot of variations of its properties because it is basically in an amorphous state. Therefore, the differences in composition ratio of ITO can result in alteration of electrical properties. Normally, ITO is considered as transparent conductive oxide (TCO), possessing excellent properties for the optical and electrical devices. Quantitatively, TCO has transparency over 80 percent within the range of 380nm to 780nm, which is visible light although its specific resistance is less than $10-3{\Omega}/cm$. Thus, the solar cell is the best example for which ITO has perfectly matching profile. In addition, when ITO is used as transparent conductive electrode, this material essentially has to have a proper work function with contact materials. For instance, heterojunction with intrinsic thin layer (HIT) solar cell could have both front ITO and backside ITO. Because each side of ITO films has different type of contact materials, p-type amorphous silicon and n-type amorphous silicon, work function of ITO has to be modified to transport carrier with low built-in potential and Schottky barrier, and approximately requires variation from 3 eV to 5 eV. In this study, we examine the change of work function for different sputtering conditions using ultraviolet photoelectron spectroscopy (UPS). Structure of ITO films was investigated by spectroscopic ellipsometry (SE) and scanning electron microscopy (SEM). Optical transmittance of the films was evaluated by using an ultraviolet-visible (UV-Vis) spectrophotometer

• Safety and Health at Work
• /
• v.5 no.3
• /
• pp.140-146
• /
• 2014

Background: Young male and female workers are over-represented in statistics concerning negative outcomes of poor work environment and risky work. Young workers often have low awareness of risk, a lack of safety training, and inadequate introduction to the work. The aim of this study was to identify the knowledge and experiences of pupils of vocational schools concerning potential work environment risks in their future work. Methods: The study design was a dual one, and included a questionnaire and focus group interviews. The study group consisted of 239 pupils from 10 upper secondary schools, who were graduating pupils in four vocational programs: the Industrial Technology Programme, the Restaurant Management and Food Programme, the Transport Programme, and the Handicraft Programme (in which students specialize in wood products). The upper secondary schools were located in the central region of Sweden. Results: The pupils had limited knowledge that employers must, by law, conduct risk analyses and prevent risks. Many felt that they themselves are mainly responsible for performing their tasks safely. Pupils in all programs mentioned acute risk as the greatest risk at work. The theoretical education about safety at work was provided in the $1^{st}$ year of the 3-year vocational programs. Conclusion: A systematic approach to pupils' training in work environment, which is a basis for a safe and healthy workplace, is lacking. The study findings indicate that pupils are offered knowledge far from that intended by laws and by state-of-the-art occupational health risk research.