• Ocean Systems Engineering
• /
• v.12 no.3
• /
• pp.359-384
• /
• 2022

We develop in this work a new well-balanced preserving-positivity path-conservative central-upwind scheme for Saint-Venant-Exner (SVE) model. The SVE system (SVEs) under some considerations, is a nonconservative hyperbolic system of nonlinear partial differential equations. This model is widely used in coastal engineering to simulate the interaction of fluid flow with sediment beds. It is well known that SVEs requires a robust treatment of nonconservative terms. Some efficient numerical schemes have been proposed to overcome the difficulties related to these terms. However, the main drawbacks of these schemes are what follows: (i) Lack of robustness, (ii) Generation of non-physical diffusions, (iii) Presence of instabilities within numerical solutions. This collection of drawbacks weakens the efficiency of most numerical methods proposed in the literature. To overcome these drawbacks a reformulation of the central-upwind scheme for SVEs (CU-SVEs for short) in a path-conservative version is presented in this work. We first develop a finite-volume method of the first order and then extend it to the second order via the averaging essentially non oscillatory (AENO) framework. Our numerical approach is shown to be well-balanced positivity-preserving and shock-capturing. The resulting scheme could be seen as a predictor-corrector method. The accuracy and robustness of the proposed scheme are assessed through a carefully selected suite of tests.

• Journal of the Korean Society of Safety
• /
• v.39 no.1
• /
• pp.55-61
• /
• 2024

In response to the COVID-19 pandemic, the logistics industry in Korea has rapidly been expanding, with offline demand concentrating on online platforms owing to the development of digital infrastructure. This has increased the workload of courier drivers considerably, along with labor intensity. A delivery driver died recently from overwork due to the continuous increase in delivery volume, which raises social concerns. Delivery drivers work long hours, (over 12 hours) and are greatly affected by weather conditions, such as snow, rain, heat waves, and cold waves. In addition, they lack a fixed workplace; perform atypical work handling workpieces of various sizes, weights, and shapes; and spend a large amount of time driving as part of their work. This work involves a high level of tension and requires attention and concentration. Despite the frequency of industrial accidents in the courier industry, studies on safety and health to quantitatively analyze and systematize the work of courier workers are very scarce. Therefore, to define the work process necessary for investigating the harmful factors in delivery service and the work analysis, this study conducted interviews and on-site surveys to analyze the unit work of the delivery service by targeting delivery workers. In other words, a framework of unit work for work analysis was presented to enable research and analysis by considering the aforementioned characteristics of the courier industry. The process was broadly divided into work, transport, storage, delay, and inspection. Work was divided into loading, sorting, unloading, and door subcategories, and transportation was divided into vehicle, cart, and walking subcategories as well as 10 small processes. Moreover, 22 unit works were again drawn by conducting field surveys and interviews. The risk of unit work derived from this study was ergonomically evaluated, and the ergonomic analysis revealed that uploading and transportation were the most dangerous. The results of this study could be used as basic data for preventing industrial accidents among courier workers, whose work has increased with the logistics volume and the development of the logistics industry.

• Safety and Health at Work
• /
• v.10 no.1
• /
• pp.67-74
• /
• 2019

Background: Few studies have examined the effects of a forward rotating shift pattern on police employee performance and well-being. This study sought to compare sleep duration, cognitive performance, and vigilance at the start and end of each shift within a three-shift, forward rotating shift pattern, common in United Kingdom police forces. Methods: Twenty-three police employee participants were recruited from North Yorkshire Police (mean age, 43 years). The participants were all working the same, 10-day, forward rotating shift pattern. No other exclusion criteria were stipulated. Sleep data were gathered using both actigraphy and self-reported methods; cognitive performance and vigilance were assessed using a customized test battery, comprising five tests: motor praxis task, visual object learning task, NBACK, digital symbol substitution task, and psychomotor vigilance test. Statistical comparisons were conducted, taking into account the shift type, shift number, and the start and end of each shift worked. Results: Sleep duration was found to be significantly reduced after night shifts. Results showed a significant main effect of shift type in the visual object learning task and NBACK task and also a significant main effect of start/end in the digital symbol substitution task, along with a number of significant interactions. Conclusion: The results of the tests indicated that learning and practice effects may have an effect on results of some of the tests. However, it is also possible that due to the fast rotating nature of the shift pattern, participants did not adjust to any particular shift; hence, their performance in the cognitive and vigilance tests did not suffer significantly as a result of this particular shift pattern.

• International Journal of Computer Science & Network Security
• /
• v.23 no.1
• /
• pp.64-70
• /
• 2023

Maritime transport is dominant in the overall volume of all international transportation. Existence and overcoming of problems, which cause pressure on shipping safety, remain actual and fully concern both maritime and inland transport. Increasing speed and cargo capacity of the ships along with the reduction of crew members lead to the automation of a growing number of work processes, which indicates the need to actively introduce appropriate measures in the security system of sea-going ships and commercial ports and to develop modern approaches to minimize negative events and incidents in the process of ship operation. Advantages in use of modern methods of monitoring the safety of ship operations, management of possible events and incidents, including investigation of accidents, first, aimed at prevention of negative occurrences and ways of prevention on this basis. Considering statistics on incidents increase, this work presents analysis of general ship accident rate, study of major accidental events growth annually, and investigation of causes of incidents, which most frequently occur in port waters and at open sea. A survey of current approaches to ensuring the safety of shipping by implementing effective tools, such as event and incident management, has been conducted.

• The Korean Journal of Air & Space Law and Policy
• /
• v.4
• /
• pp.7-35
• /
• 1992

The expansion of air transport on a global scale with ever increasing traffic densities has brought about problems that must be solved through new multilateral mechanisms. Looking to the immediate future, air transport will require new forms of international cooperation in technical and economic areas. Air transport by its very nature should have been a counterforce to nationalism. Yet, the regulatory system in civil aviation is still as firmly rooted in the principle of national sovereignty as when it was first proclaimed at t-11e Paris Convention of 1919 and reaffirmed in the Chicago Convention. Sovereignty over the airspace has remained the cornerstone of relations between states in all respects of air transport. The importance of sovereignty over air space embodied in article 1 of the Chicago Conrenton also is responsible for restricting the authority of ICAO as an intergovernmental regulatory agency. The Orgenization, for all its extensive efforts, has only limited authority. ICAO sets standards but cannot enforce them; it devises solutions but cannot impose them. To implement its rules ICAO most rely not so much on legal requirements as on the goodwill of states. It has been forty-eight years since international community set the foundations of the international system in civil aviation action. Profound political, economic and technological changes have taken place in air transport. The Chicago Convention is living proof that staes can work together to make air transport a safe mode of travel. The law governing international civil auiation is principally based on international treaties and on other regulation agreed to by governments, for the most part through the mechanism of ICAO. The role of ICAO international standards and recommended practices and procedures dealing with a broad range of technical matters could hardly be overestimated. The organization's ability to develop these standards and procedures, to adapt them continuously to the rapid sate of change and development of air transport, should be particularly stressed. The role of ICAO in the area of the development of multilateral conventions on international air law has been successful but to a certain degree. From the modest starting-point of the Tokyo Convention, we have seen more adequate international instruments prepared within the scope of ICAO activities, adopted: the Hague Convention of 1970 for the suppression of Unlawful Seizure of Aircraft and the Montreal Convention of 1971 for the Suppression of Unlawful Acts against the Safety of Civil Aviation. The work of ICAO in the new domain of international law conventions concerning what has been loosely termed above as the criminal problems connected with international air transport, in particular the problem of armed aggression against aircraft, should be positively appreciated. But ICAO records in the domain of developing a uniform legal system of international carriage by air are rather disappointing. The problem of maintaining and developing the uniformity of this regulation exceeds the scope of interest and competence of governmental transport agencies. The expectations of mankind linked to it are too great to give up trying to restore the uniform legal system of international air carriage that would create proper conditions for its further growth. It appears that ICAO has, at present, a good opportunity for doing this. The hasty preparation of ICAO draft conventions should be definitely excluded. Every Preliminary draft convention ought to be sent to Governments of all member-States for consideration, So that they could in form ICAO in due time of their observation. The problom of harmonizing a uniform law of international air carriage with that of other branches of international transport should demand more and more of its attention. ICAO cooperation with other international arganization, especially these working in the field of international transport, should be strengthened. ICAO is supposed to act as a link and a mediator among, at times the conflicting interests of member States, serving the happiness and peace of all of the world. The transformation of the contemporary world of developing international relations, stimulated by steadily growing international cooperation in its various dimensions, political, economic, scientific, technological, social and cultural, continuously confronts ICAO with new task.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.170-171
• /
• 2015

Resource procurement and material handling are considered as a significant part of construction project especially in large or tall building construction site. There are multiple variables that must be considered in a construction site during finishing work such as movement of materials, equipments, and workers. Therefore, it is difficult for construction workers to find the material handling path solely by intuition. The aim of this study is to propose a real-time path finding model suitable for complicated logistics flow in the field. The model explores the optimal transport path of finishing material with its basis on optimization algorithm, and it determines the direction of the Smart Sign. The proposed model is expected to be utilized for planning of efficient finishing material handling.

• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.157-164
• /
• 2012

PURPOSES: Regional offices of the Ministry of Land, Transport and Maritime Affairs use a computerized system called KAMIS so as to manage road equipment systematically. Road agencies can record number of operating days by equipment, actual working hours, accumulated operating hours (or distance) by equipment, and operating cost. However, KAMIS does not provide critical information, although it is strongly related to efficient road management equipment operation. In other words, road agencies do not know whether they have sufficient equipment to handle their actual work. METHODS: Therefore, this study suggests a methodology to evaluate for operational efficiency of road management equipment using analytical hierarchy process(AHP). First of all, estimated weights related criteria can be produced by AHP, and then use operational history by pieces of equipment. RESULTS: Results show that importance of management work can differ from weather conditions through five areas. CONCLUSIONS: Commonly, this results can imply to help save money for the purchase and maintenance of road management equipment, and they would improve the functional performance of KAMIS.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.101-102
• /
• 2017

This study was carried out as basic study to apply to construction site the HPC method which is being developed. The construction cost of HPC method was analyzed in comparison with conventional method (half slab method). With regard to research method, it was decided that data on construction work carried out by half slab method was analyzed. According to the results of study, in case of being applied to the construction work using a divided column, the number of columns was decreased. So, it was shown that member production cost, and transport and assemblage cost reduced. In case of being applied to construction work using an undivided column, the analysis showed that there was little difference in construction cost. Therefore, the analysis showed that, if HPC construction method was applied to large structure using a large column, the construction cost was reduced to some extent in comparison with conventional half slab method.

• Journal of the Korean Society of Safety
• /
• v.20 no.1 s.69
• /
• pp.148-152
• /
• 2005

The purpose of this paper is to investigate risk factors and ergonomically improve the manufacturing lines of compressors for prevention of work-related musculoskeletal disorders, enhancement of productivity, and workers satisfaction We executed questionnaire survey, ergonomic risk factors investigation of manufacturing lines and ergonomic intervention of work methods, workplace and hand tools. The results of the questionnaire showed that $7.9\%$ of respondents were positive in WMSDs symptom survey. In ergonomic evaluation, the analysis methods such as RULA and NIOSH lifting equation were used and 28 processes in the lines were evaluated to be potentially hazardous. We ergonomically improved the processes to reduce potential WMSDs hazards : manual material handling, carts, work tables, transport methods, working posture and hand tools.

• Advances in aircraft and spacecraft science
• /
• v.9 no.4
• /
• pp.319-333
• /
• 2022

This work presents a numerical investigation of the aerodynamics and aero acoustics of the HVAB rotor in hover conditions. Two fully turbulent models are employed, the one-equation Spalart-Allmaras model and the two-equation k-ω SST model. Transition effects are investigated as well using the Langtry-Menter γ-Re θt transition transport model. The noise generation and propagation are being investigated using the Ffows-Williams Hawking model for far-field noise and the broadband model for near-field noise. Comparisons with other numerical solvers and with the PSP rotor test data are presented. The results are presented in terms of thrust and power coefficients, the figure of merit, surface pressure distribution, and Sound pressure level. Velocity, pressure, and vortex structures generated by the rotor are also shown in this work. In addition, this work investigates the contribution of different blade regions to the overall noise levels and emphasizes the importance of considering specific areas for future improvements.