• Journal of Communications and Networks
• /
• v.11 no.5
• /
• pp.518-528
• /
• 2009

IEEE 802.11 wireless local area network (WLAN) has become the prevailing solution for wireless Internet access while transport control protocol (TCP) is the dominant transport-layer protocol in the Internet. It is known that, in an infrastructure-based WLAN with multiple stations carrying long-lived TCP flows, the number of TCP stations that are actively contending to access the wireless channel remains very small. Hence, the aggregate TCP throughput is basically independent of the total number of TCP stations. This phenomenon is due to the closed-loop nature of TCP flow control and the bottleneck downlink (i.e., access point-to-station) transmissions in infrastructure-based WLANs. In this paper, we develop a comprehensive analytical model to study TCP dynamics in infrastructure-based 802.11 WLANs. We calculate the average number of active TCP stations and the aggregate TCP throughput using our model for given total number of TCP stations and the maximum TCP receive window size. We find out that the default minimum contention window sizes specified in the standards (i.e., 31 and 15 for 802.11b and 802.11a, respectively) are not optimal in terms of TCP throughput maximization. Via ns-2 simulation, we verify the correctness of our analytical model and study the effects of some of the simplifying assumptions employed in the model. Simulation results show that our model is reasonably accurate, particularly when the wireline delay is small and/or the packet loss rate is low.

• Journal of the Korea Society for Simulation
• /
• v.22 no.3
• /
• pp.25-33
• /
• 2013

The research focuses on the method to improve the Logistics considering investigating the present state of the fast growing social commerce. The improving Logistics is the jointed transport system, which proposes the concept of the packaged delivery for customers in same area and the condition-specific benefits as the transport cost and delay period. Customers in this system will obtain the advantage as the decrease of transport cost and social commerce companies will make the effect about growing the number of customer and the sales by the lowest price in the online markets. There are 7 scenarios for simulation. The performance assessment of the results from simulation is carried out by total number of orders, finished number of orders, sales, delivery times, delivery cost, earlier rate of delivery, and fluctuation of number of wrong delivery. The results of the research show that the total number of orders, finished number of orders and sales are increased, while the times and cost of delivery are decreased.

• Journal of Broadcast Engineering
• /
• v.27 no.6
• /
• pp.914-922
• /
• 2022

In this paper, we construct a commercial 4K UHD(Ultra High Definition) streaming device that utilizes a 5G mobile communication network as a transport channel and conduct a streaming performance test. It uses RTP(Realtime Transport Protocol) which has transmission quality monitoring capability as a transmission protocol to apply adaptive streaming. In addition, it provides the function to adjust the encoding rate of the video signal so that encoding can be optimized for the change in the bandwidth of the transmission channel. Through the performance test, it is confirmed that the H.265 encoding rate for 4K UHD signal is 48.69Mbps, the average glass-to-glass delay time is 293.60ms, and the average time difference between video and audio for lip sync is 120ms. With the result of performance test, it is shown that the streaming device is applied to 4K UHD Streaming device over 5G mobile communication network.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.70-86
• /
• 2022

An autonomous demand-responsive bus with mobility-on-demand service is an innovative transport compensating for the disadvantages of an autonomous bus and a demand-responsive bus with mobility-on-demand service. However, less attention has been paid to the quantitative impact assessment of the autonomous demand-responsive bus due to the technological complexity of the autonomous demand-responsive bus. This study simulates autonomous demand-responsive bus trips by reinforcement learning on a microscopic traffic simulation to quantify the impact of the autonomous demand-responsive bus. The Chungju campus of the Korea National University of Transportation is selected as a testbed. Simulation results show that the introduction of the autonomous demand-responsive bus can reduce the wait time of passengers, average control delay, and increase the traffic speed compared to the results with fixed route bus service. This study contributes to the quantitative evaluation of the autonomous demand-responsive bus.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.2
• /
• pp.62-68
• /
• 2016

Purpose In a cyclosporine experiment using a robotic liquid handing system has found a deviation of its standard curve and low reproducibility of patients's results. The difference of the test is that methanol is mixed with samples and the extractions are used for the test. Therefore, we assumed that the abnormal test results came from using methanol and conducted this test. In a manual of a robotic liquid handling system mentions that we can choose several setting parameters depending on the viscosity of the liquids being used, the size of the sampling tips and the motor speeds that you elect to use but there's no exact order. This study was undertaken to confirm pipetting ability depending on types of liquids and investigate proper setting parameters for the optimum dispensing ability. Materials and Methods 4types of liquids(water, serum, methanol, PEG 6000(25%)) and $TSH^{125}I$ tracer(515 kBq) are used to confirm pipetting ability. 29 specimens for Cyclosporine test are used to compare results. Prepare 8 plastic tubes for each of the liquids and with multi pipette $400{\mu}l$ of each liquid is dispensed to 8 tubes and $100{\mu}l$ of $TSH^{125}I$ tracer are dispensed to all of the tubes. From the prepared samples, $100{\mu}l$ of liquids are dispensed using a robotic liquid handing system, counted and calculated its CV(%) depending on types of liquids. And then by adjusting several setting parameters(air gap, dispense time, delay time) the change of the CV(%)are calcutated and finds optimum setting parameters. 29 specimens are tested with 3 methods. The first(A) is manual method and the second(B) is used robotic liquid handling system with existing parameters. The third(C) is used robotic liquid handling system with adjusted parameters. Pipetting ability depending on types of liquids is assessed with CV(%). On the basis of (A), patients's test results are compared (A)and(B), (A)and(C) and they are assessed with %RE(%Relative error) and %Diff(%Difference). Results The CV(%) of the CPM depending on liquid types were water 0.88, serum 0.95, methanol 10.22 and PEG 0.68. As expected dispensing of methanol using a liquid handling system was the problem and others were good. The methanol's dispensing were conducted by adjusting several setting parameters. When transport air gap 0 was adjusted to 2 and 5, CV(%) were 20.16, 12.54 and when system air gap 0 was adjusted to 2 and 5, CV(%) were 8.94, 1.36. When adjusted to system air gap 2, transport air gap 2 was 12.96 and adjusted to system air gap 5, Transport air gap 5 was 1.33. When dispense speed was adjusted 300 to 100, CV(%) was 13.32 and when dispense delay was adjusted 200 to 100 was 13.55. When compared (B) to (A), the result increased 99.44% and %RE was 93.59%. When compared (C-system air gap was adjusted 0 to 5) to (A), the result increased 6.75% and %RE was 5.10%. Conclusion Adjusting speed and delay time of aspiration and dispense was meaningless but changing system air gap was effective. By adjusting several parameters proper value was found and it affected the practical result of the experiment. To optimize the system active efforts are needed through the test and in case of dispensing new types of liquids proper test is required to check the liquid is suitable for using the equipment.

• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.2
• /
• pp.3-31
• /
• 2017

On 12 October 2017, the English Royal Courts of Justice delivered its decision about air carrier's compensation liability for the flight delay. In the cases the passengers suffered delays at a connecting point and, consequently, on arrival at their final destination. They claimed compensation under Regulation 261/2004 (the "Regulation"), as applied by the Court of Justice of the European Union (the "CJEU") in Sturgeon v. Condor [2009]. The principal issues were whether delays suffered by the passengers during the second leg of their respective journeys were compensable under the Regulation, whether there was jurisdiction under the Regulation and whether the right to compensation under the Regulation is, insofar as non-Community air carriers are concerned, excluded by virtue of the exclusive liability regime established under the Montreal Convention 1999. The passengers, the plaintiff, argued that the relevant delay was not that on flight 1 but that suffered at the "final destination". They maintained that there was no exercise by the EU of extraterritorial jurisdiction as the delay on flight 2 was merely relevant to the calculation of the amount of compensation due under the Regulation. The air carrier, the defendant, however argued that the only relevant flights for the purpose of calculating any delay were the first flights (flights 1) out of EU airspace, as only these flights fell within the scope of the Regulation; the connecting flights (flights 2) were not relevant since they were performed entirely outside of the EU by a non-Community carrier. Regarding the issue of what counts as a delay under the Regulation, the CJEU held previously on another precedents that the operating carrier's liability to pay compensation depends on the passenger's delay in arriving at the "final destination". It held that where the air carrier provides a passenger with more than one directly connecting flight to enable him to arrive at their destination, the flights should be taken together for the purpose of assessing whether there has been three hours' or more delay on arrival; and that in case of directly connecting flights, the final destination is the place at which the passenger is scheduled to arrive at the end of the last component flight. In addition, the Court confirmed that the Regulation applied to flights operated by non-Community carriers out of EU airspace even if flight 1 or flight 2 lands outside the EU, since the Regulation does not require that a flight must land in the EU. Accordingly, the passengers' appeal from the lower Court was allowed, while that of air carrier was dismissed. The Court has come down firmly on the side of the passengers in this legal debate. However, this result is not a great surprise considering the recent trends of EU member states' court decisions in the fields of air transport and consumer protection. The main goal of this article is to review the Court's decision and to search historical trend of air consumer protection especially in EU area.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.225-266
• /
• 2018

In 2017, 1,252 cases of damages relief related to air passenger transport service were received by the Korea Consumer Agency, a 0.8% drop from 1,262 cases in 2016, the first decline since 2013. In 2017, 444 cases (35.4%) out of received cases of damages relief in the field of air passenger service received by the Korea Consumer Agency were agreed on, and out of cases that were not agreed on, the most number of 588 cases (47.0%) were concluded due to information provision and counseling, and 186 cases (14.9%) were applied to the mediation of the Consumer Dispute Mediation Committee. Major legislations that contain regulations for the damages relief and disputes resolution of air service consumers include the Aviation Business Act and the Consumer Fundamental Act, etc. The Aviation Business Act provides the establishment and implementation of damage relief procedure and handling plan, and the receiving and handling of request of damage relief by air transport businessman, and the notice of protection standard for air traffic users. The Consumer Fundamental Act provides the establishment and management of the consumer counseling organization, the damage relief by the Korea Consumer Agency, the consumer dispute mediation, and the enactment of the criteria for resolving consumer disputes. The procedures for damages relief of air service consumers include the receiving and handling of damages relief by air transport businessman, the counseling, and receiving and handling of damages relief by the Consumer Counseling Center, the advice of mutual agreement by the Korea Consumer Agency, and the dispute mediation system by the Consumer Dispute Mediation Committee. The current system of damage relief and dispute mediation for air service consumer have the problem in the exemption from obligation of establishment and implementation of damage relief plan by air transport businessman under the Aviation Business Act, the problem in the exemption from liability in case of nonfulfillment and delay of transport by aviation businessman under the criteria for resolving consumer disputes in the aviation sector, and the uppermost limit in procedure progress and completion of consumer dispute mediation under the Consumer Fundamental Act. Therefore, the improvement measurements of the relevant system for proper damage relief and smooth dispute mediation for air service consumer are to be suggested as follows: First is the maintenance of the relevant laws for damage relief of air service consumer. The exemption regulation from obligation of establishment and implementation of damage relief plan by air transport businessman under the Aviation Business Act shall be revised. To enhance the structualization and expertise of the relevant regulation for protection and damage relief of air service consumer, it will be necessary to prepare the separate legislation similar to the US Federal Regulation 14 CFR and EU Regulation EC Regulation 261/2004. Second is the improvement of criteria for resolving air service consumer disputes. For this, it will be necessary to investigate whether the cause of occurrence of exemption reason was force majeure, and distinguish the exemption from liability in case of nonfulfillment and delay of transport by aviation businessman under the criteria for resolving consumer disputes in the aviation sector, and revise the same as exemption reasons regulated under the air transport chapter of the Commercial Act and Montreal Convention 1999, and unify the compensation criteria for the nonfulfillment of transport that the substitute flight was provided and the delay of transport. Third is the reinforcement of information provision for damage relief of air service consumer. Aviation-related government agencies and concerned agencies should cooperate with airlines and airports to provide rapidly and clearly diverse information to the air traffic users, including laws and policies for damages relief of air service consumers. Fourth is the supplement to the effectiveness, etc. of consumer dispute mediation. If there is no sign of acceptance for dispute mediation, it is not fair to regard it as acceptance, therefore it will be necessary to add objection system. And if a dispute resolution is requested to another dispute settlement agency in addition to the Consumer Dispute Mediation Committee, it is excluded from the damage relief package, but it should be allowed for the party to choose a mediation agency. It will be necessary to devise the institutional measures to increase the completion rate of mediation so that the consumer dispute can be resolved efficiently through the mediation. Fifth is the introduction of the air service consumer arbitration system. A measure to supplement the limitations of the consumer dispute mediation system is to introduce the consumer arbitration system, but there are two measurements which are the introduction of the consumer arbitration under the Consumer Fundamental Act and the introduction of the consumer arbitration under the Arbitration Act. The latter measurement is considered to be appropriate. In conclusion, as a policy task, the government should prepare laws and system to enhance the prevention and relief of damages and protection of the rights and interests of air service consumers, and establish and implement the consumer-centric policy for the advancement of air service.

• Journal of Communications and Networks
• /
• v.1 no.3
• /
• pp.145-152
• /
• 1999

A new switch architecture is presented to enhance out-put queuing in photonic packet switches. Its appkication is for a packet switching enviroment based on the optical transport of fixed length packets. This architecture consists of a couple of cas-cading switching elements with output queuing, whose buffer ca-pacity is limited by photonic technology. The introduction of a suitable buffer management allows a very good and balanced ex-ploitation of the available optical memories, realized with fiber de-lay lines. In particular, packet loss performance is here evaluated showing the improvement with respect to the single switch and a way to design large optical switches is shown in order to meet broadband network requirements.

• Journal of information and communication convergence engineering
• /
• v.8 no.2
• /
• pp.168-172
• /
• 2010

The Network-based handover still has problems such as the transmission delays and the packet losses in the case of macro mobility, though technological advances have been made in the wireless and mobile communication. For end-to-end handover, the link bandwidth has been reduced in the wireless network due to its burst errors and congestion control. To overcome such problems, we propose a new scheme of the macro handover according to the protocol layer. The proposed macro handover is implemented on the network layer to partially substitute wired signaling for wireless signaling, to flexibly employ buffers, and on the transport layer to postpone its retransmission time. We have performed extensive simulation using ns-2 and the result shows that our proposed scheme outperforms the other existing schemes in terms of transmission delay, packet loss, and data transfer rate during the handovers.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.473-476
• /
• 2000

WDM is a very promisinig technique for the realization of future All-Optical networks. WDM gives an advantage of high rate transmission without delay for Electronic/optical conversion. But the available number of wavelengths is limited by technical restriction. so the efficient optical path routing and wavelength assignment is needed. this paper is concerned with the efficient design of WDM optical transport networks. RWA assumes that the connection demands between node pairs are given. the objective of RWA is to minimize the number of wavelengths. these design consider the static routing and wavelength assignment in the network of arbitrary topology. To solve these problems, this paper proposes some heuristic algorithms.