• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.113-127
• /
• 2018

This study develops a fusion priority signal control algorithm to pass without delay in emergency events. Fusion priority signal control is method combined center control with local control. The center control method applies signal times for each signalized intersection on the emergency vehicle's route when an emergency call is received. As signals are controlled before the emergency vehicle leaves for its destination, it is possible to clear the queues at each intersection more effectively. However, since the traffic information (speed, position) of the real-time emergency vehicle is not used, the intersection arrival time predicted by center control and actual arrival time of the emergency vehicle may be different from each other. In the case, it is possible to experience a delay caused by the signal. Local control method operate priority signal use the real-time information of EV, but there is a limitation that queue elimination time can not be reflected. In this study, fusion(center+local) control algorithm is proposed to compensate the disadvantages of center and local control also maximizing its advantages. Proposed algorithm is expected to decrease delay time of EV in emergency situation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.4
• /
• pp.40-51
• /
• 2015

This study analysis traffic phase order alternatives to maximize throughput. According to theoretical analysis alternative2(EW: left turn after through, NS: through after left turn) and alternative5(EW: through after left turn, NS: left turn after through) can minimize the maximum delay. Both alternatives split the phase that have the same destination link under the whole cycle length. This shows that phase order alternative can effect to the fully saturated intersection. In side of simulation analysis by microscopic traffic simulator PTV VISSIM F 7.0, each phase order alternatives can't effect throughput under the non saturated condition. However under the saturated condition, the average controlled delay of the intersection has been changed by phase order alternatives. The simulation analysis shows that alternative2 and alternative5 increase throughput 3.8% to 5.1% under the saturated condition.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.15-22
• /
• 2012

A performance index of singalized intersections is a standard to optimize signal control variables and to manage traffic flow. Traffic delays is generally used to minimize the average delay time on intersections or networks, progression efficiency is used to improve travel speed of main cooridors or to provide transit signal priority. We manage traffic flows with only selecting one index between delays and progression according to the objective of traffic management and field characteristics. In real field, the driver's satisfaction is high in any performance criteria when the waiting time is shorter and the unnecessary stop in front of traffic is smaller. This paper aims to develop simulation model to represent real progression with concurrently considering delays and progression. In order to reflect an effect of level of traffic volumes and residual queues which don't be considered in prior progression model, we apply shockwave model with flow-density diagram. We derive Cell Transmission Model of Daganzo in order to develop the delay index and the progression index for the macroscopic simulation model. In order to validate the effect, we analysis traffic delays and progression efficiency with comparing this model to Transyt-7F and PASSER V.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.12-19
• /
• 2014

A signal plan focused on vehicle traffic could easily overlook vulnerable priority signals, although the importance of vulnerable movements is increasingly recognized in recent years. Especially, the vulnerable are sometimes faced with dangerous situations when crossing roads with a signal plan based on design values of average, non-vulnerable persons. This study is focused on how to minimize the vehicle delay while simultaneously considering traffic flow and providing traffic safety by increasing road crossing time for pedestrians. For this purpose, a priority signal control strategy for the vulnerable, considering vehicle traffic flow, has been tested. Practical implication and a microscopic computer simulation has shown that the proposed method could provide a small decrease (about 6.2%) in pedestrian delay, a small increase (about 8.5~13.3%) in travel speed of passing traffic, and a considerable decrease (16.2~26.9%) in vehicle travel time. These findings suggest that the proposed signal control strategy could increase pedestrian safety and diminish delay of vehicle travel.

• The Korean Journal of Emergency Medical Services
• /
• v.3 no.1
• /
• pp.91-101
• /
• 1999

The medicolegal problem can be occurred in all medical field. Especially pre-hospital stage can be more exposed to the legal claims due to the very nature of EMT business and characteristics of ER patient or their family member. All Emergency Medical Technician should be concerned about the law associated with emergency care for handling the medicolegal problem, so the legally risky situations that may be occurred in pre-hospital stage and ER practice. This study reviewed malpractice claim of emergency patients filed in at Association of malpractice patients' family and two tertiary level hospitals. Problems related to treatment and misdiagnosis. Especially issues concerning emergency medical service system including of inadequate transport, delay in triage and transport accounted for many cases of all claims. This alerts us to the seriousness of medical accidents of emergency patient. This paper suggests several items that all E.M.T and every member of ED health care team always have to remember the medicolegally risk situations, must be trained in understanding the patients' wants and desires and should have the knowledge of the law associated with emergency health care. Develop the system that can share the informations about the medicolegal events which were experienced by each ED health care institutes.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.4
• /
• pp.216-223
• /
• 2013

As the fast growth of using Internet, the requests of clients having different types and pressing loads on the server have been increased in World Wide Web. Thus the interesting issue is how to measure the real capacity of a Web Server. There have been much recent studies about measuring the capacity of web server. But the cause of Server response time delay is not just server itself but also network packet loss. To measure the practical capacity of web server, we generate scalable clients using Posix Thread, transport packets which were generated by scalable clients to the server using UDP and receive the packets which were the remain packet from network packet loss using TCP. In this paper, we propose a method to measure the practical capacity of a web server using the Scalable Clients based on Posix Thread and the transport on Application level.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.233-238
• /
• 1993

In this paper, two diagnosis algorithms using the simple fuzzy, cognitive map (FCM) that is an useful qualitative model are proposed. The first basic algorithm is considered as a simple transition of Shiozaki's signed directed graph approach to FCM framework. And the second one is an extended version of the basic algorithm. In the extension, three important concepts, modified temporal associative memory (TAM) recall, temporal pattern matching algorithm and hierarchical decomposition are adopted. As the resultant diagnosis scheme takes short computation time, it can be used for on-line fault diagnosis of large scale and complex processes that conventional diagnosis methods cannot be applied. The diagnosis system can be trained by the basic algorithm and generates FCM model for every experienced process fault. In on-line application, the self-generated fault model FCM generates predicted pattern sequences, which are compared with observed pattern sequences to declare the origin of fault. In practical case, observed pattern sequences depend on transport time. So if predicted pattern sequences are different from observed ones, the time weighted FCM with transport delay can be used to generate predicted ones. The fault diagnosis procedure can be completed during the actual propagation since pattern sequences of tvo different faults do not coincide in general.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.29-37
• /
• 2017

Intersection signal's phase time is calculated and determined by car and pedestrian traffic volume. If signal phase time and traffic volume dis-matched, cars and pedestrians have much delay time. This paper suggested an All-Red phase application method that cars and pedestrians securing safety and minimizing traffic signal waiting time. The key solution of this suggested method is determining All-Red phase operation by using sum of spare green time that have no passing cars. That is, total time of spare green time that have no passing cars is longer than All-Red phase time, operating All-Red phase has an effect. And case study carried out at the signalized intersection, revealed that this suggested method has much effectiveness.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.1
• /
• pp.92-97
• /
• 2012

This paper suggests a data gathering scheme using dynamic branch tree in wireless sensor networks. A mobile sink gathers data from each sensor node using a dynamic data gathering tree rooted at the mobile sink node. As the sink moves, a tree that has multiple branch is formed and changed dynamically as with the position of the sink node. A hop-based scope filter and a restricted flooding scheme of the tree are also suggested. Simulation results show that the proposed data gathering scheme has better results in data arrival rate, the end-to-end delay and energy saving characteristics compared with the previous scheme.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.2 s.3
• /
• pp.13-22
• /
• 2003

It is recognized that one of the problems for the current 'Traffic Adaptive Control System in Seoul' is the performance at the oversaturated condition. Instead of 'Degree of Saturation' adopted in the current system, the methodology of balancing the queue length was developed and evaluated in this study. This method keeps the balance of queue lengths on the intersections and reduces the overall queue lengths. In addition a traffic signal control model was developed based on the method. This model can reduce not only the queue lengths but also the average delay of vehicles according to the macroscopic and microscopic evaluations.