• Tunnel and Underground Space
• /
• v.18 no.1
• /
• pp.44-57
• /
• 2008

In this study, a 2D finite-element analysis, using the SEEP/W program, was carried out to estimate the amount of groundwater flawing into a tunnel, as well as the groundwater tables around wetland areas during and after a tunnel excavation through rock mass. Four sites along the Wonhyo-tunnel in Cheonseong Mountain (Gyeongnam, Korea) were analysed, where the model damain of the tunnel included both wetland and fault zone. The anisotropy of the hydraulic conductivities of the rock mass was calculated using the DFN model, and then used as an input parameter for the cantinuum model. Parametric study on the influencing factors was perofrmed to minimize uncertainties in the hydraulic properties. Moreover, the volumetric water content and hydraulic conductivity functions were applied ta the model to reflect the ability of a medium ta store and transport water under both saturated and unsaturated conditions. The conductivity of fault zone was assumed ta be $10^{-5}m/sec\;or\;10^{-6}m/sec$ and the conductivity of grouting zone was assumed as 1/10, 1/50 or 1/100 of the conductivity of rock mass. Totally $6{\sim}8$ cases of transient flow simulation were peformed at each site. The hydraulic conductivities of fault zone showed a significant influence on groundwater inflow when the fault zone crossed the tunnel. Also, groundwater table around wetland maintained in case that the hydraulic conductivity of grouting zone was reduced ta be less than 1/50 of the hydraulic conductivity of rock mass.

• Journal of Plant Biotechnology
• /
• v.35 no.2
• /
• pp.133-140
• /
• 2008

The modification of DNA and histone plays an important role for gene expression in plant development. The objective of this research is to observe the effects of methylation on the gene expression during dedifferentiation from rice mature seeds to callus and differentiation from callus to shoots. The embryogenic callus with ability to shoot regeneration was not induced on the N6A medium supplemented with 5-azacytidine and abnormal callus with brown color was formed. When the normal rice callus was placed on the regeneration MSRA medium supplemented with 5-azacytidine, the shoot regeneration was inhibited. The results showed that 5-azacytidine, DNA demethylating agent, had negative effects on normal embryogenic callus formation and shoot regeneration. This suggested that DNA methylation of some genes was required for normal cell dedifferentiation and differentiation in tissue culture. The microarray and $GeneFishig^{TM}$ DEG screening were used to observe the gene transcript profile in callus induction and regeneration on N6A (N6 medium + 5-azaC) and MSRA (MS regeneration medium + 5-azaC). Subsets of genes were up-regulated or down-regulated in response to 5-azaC treatments. The genes related with epigenetic regulation, electron transport, nucleic acid metabolism and response to stress were up and down regulated. The different expression of some genes (germin like protein etc.) during callus induction and shoot regeneration was confirmed using RT-PCR and northern blot analysis.

• The Journal of the Korea Contents Association
• /
• v.13 no.3
• /
• pp.444-455
• /
• 2013

The purpose of this study is to explore the selection attributes for parents of children with language disability when choosing a clinic. The data collection was carried out in 3 steps: the preliminary survey, first open survey and second survey in AHP(Analytic Hierarchy Process). The subjects of were 252 in total. The results were as follows: First, The order of priority attributes in superior categories for parents of children with language disability when selecting a clinic were 'therapist-related attributes', 'program-related attributes' and 'physical-related attributes' in turn. The top 5 priority attributes in subcategories were 'therapist's academic background and major', 'ability to make a rapport', 'clinical experience and qualification of therapist', 'kindness and confidence' and 'counseling program for parents'. Second, The parents of preschoolers age 6 and younger chose 'clinical experience and qualification of therapist', 'counseling program for parents' and 'learning materials' for the most priority attributes, whereas the parents of students age from 7 to 12, considered 'therapist's academic background and major', 'clinical fee' and 'distance transport parking' more importantly to select a clinic. The results of this study provided preliminary data for successful planning of speech and language therapy.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.3
• /
• pp.471-498
• /
• 2009

The ability to judge a country's scientific standing is vital for the governments and businesses that must decide scientific priorities and funding. In this paper, we analyze the output and outcomes from research investment over the recent years, to measure the quality of scientific research on national scales and to set it in an international context. There are many ways to evaluate the quality of scientific research, but few have proved satisfactory. To measure the quantity and quality of science in different nations, we analyzed the numbers of published research papers and their citations. The number of citations per paper is a useful measure of the impact of a nation's research output. Essential at a were acquired from SCI database by Thomson Scientific, which indexes more than 8,000 journals, representing most significant materials in science and engineering. The purpose of this paper is to evaluate and compare the output and outcomes among nations in a variety of viewpoints and criteria. One of the implications in response to the result of analysis is that sustainable economic development in highly competitive world markets requires a direct engagement in the generation of knowledge. Even modest improvement in healthcare, clean water, sanitation, food, and transport need capabilities in engineering, technology, and medicine beyond many countries' reach. Nations exporting natural resources such as gold and oil can import technology and expertise, but only until these resources are exhausted. For them, sustainability should imply investment in alternative agricultural and technological capabilities through improvements in their skills base. A strong science base does not necessarily leat to wealth generation. However, strength in science has additional benefits for individual nations, and for the world as a whole.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1120-1130
• /
• 2020

The CREOLE experiment performed In the EOLE critical facility located In the Nuclear Center of CADARACHE - CEA have allowed us to get interesting and complete experimental information on the temperature effects in the light water reactor lattices. To analyze these experiments with accuracy an elaborate calculation scheme using the Monte Carlo method implemented in the MCNP6.1 code and the ENDF/B-VII.1 cross section library has been developed. We have used the ENDF/B-VII.1 data provided with the MCNP6.1.1 version in ACE format and the Makxsf utility to handle the data in the specific temperatures not available in the MCNP6.1.1 original library. The main purpose of this analysis is the qualification of the ENDF/B-VII.1 nuclear data for the prediction of the Reactivity Temperature Coefficient while ensuring the ability of the MCNP6.1 system to model such a complex experiment as CREOLE. We have analyzed the case of UO₂ lattice with 1166 ppm of boron in ordinary water moderator in specified temperatures. A detailed comparison of the calculated effective multiplication factors with the reference ones [1] in room temperature presented in this work shows a good agreement demonstrating the validation of our 3D calculation model. The discrepancies between calculations and the differential measurements of the Reactivity Temperature Coefficient for the analyzed configuration are relatively small: the maximum discrepancy doesn't exceed 1,1 pcm/℃. In addition to the analysis of direct differential measurements of the reactivity temperature coefficient performed in the poisoned UO₂ lattice configuration, we have also analyzed integral measurements in UO₂ clean lattice configuration using equivalency of the integral temperature reactivity worth with the driver core fuel reactivity worth and soluble boron reactivity worth. In this case both of the ENDF/B-VII.1 and JENDL.4 libraries were used in our analysis and the obtained results are very similar.

• Journal of agricultural medicine and community health
• /
• v.27 no.1
• /
• pp.125-142
• /
• 2002

This study was carried out to purpose drawing up the efficient method of rural residents' health management, analyzing factors having influences on the behavioral intention and the behavior of hepatitis B vaccination of rural residents, using the theory of planned behavior(TPB). Surveying the first questionnaire about TPB to 439 people of rural adults over 40-year old who participated to hepatitis B examination program was made from March 14 to April 23 in 2001 at two primary health care posts in a city in Gyeongsangbuk-do and the second survey for hepatitis B vaccination was made to the last subjects of 332 people(75.6%) that had been proved as subjects of inoculation against the hepatitis B as the result of examination after two months of notification. In the behavioral intention rate of hepatitis B vaccination of the subjects within a month, 100%(the top) was 45.2%, 80-90%(the middle) was 21.1% and under 70%(the low) was 33.7%. In simple analysis, vaccination intention was related with significantly health security type and economic status(p<0.05). And vaccination intention was related with significantly all variables of attitude toward behavior and subjective norm, and economic power of utilizing medical facilities and perceived power variable of perceived behavioral control(p<0.01). The vaccination rate of the subjects within a month was 31.3%. In simple analysis, the vaccination rate was higher significantly in the lower the age was, the higher the educational level was(p<0.01), the larger the family was, and subjects having transport(p<0.05). And the vaccination rate was higher in the higher the economic power was and the higher the perceived ability was. As the results of making generalized logit analysis for behavioral intention, the more positive the subjective norm was, the higher was the score of the perceived behavioral control, the intention was higher significantly in the top class on a basis of the low class of behavioral intention. In multiple logistic regression analysis for vaccination(behavior) using intention and perceived behavioral control as dependent variables, it showed that perceived behavioral control variable only influenced significantly. The higher was the score of perceived behavioral control, it showed that they got the more vaccination(p<0.01). And even in the result having analyzed, adding the significant general characteristics variables in the simple analysis to the independent variable, the higher was the score of perceived behavioral control, it showed that they got vaccination more.

• Composites Research
• /
• v.26 no.6
• /
• pp.363-372
• /
• 2013

Numerical simulation for Resin Transfer Molding manufacturing process is attempted by using the eXtended Finite Element Method (XFEM) combined with the level set method. XFEM allows to obtaining a good numerical precision of the pressure near the resin flow front, where its gradient is discontinuous. The enriched shape functions of XFEM are derived by using the level set values so as to correctly describe the interpolation with the resin flow front. In addition, the level set method is used to transport the resin flow front at each time step during the mold filling. The level set values are calculated by an implicit characteristic Galerkin FEM. The multi-frontal solver of IPSAP is adopted to solve the system. This work is validated by comparing the obtained results with analytic solutions. Moreover, a localization method of XFEM and level set method is proposed to increase the computing efficiency. The computation domain is reduced to the small region near the resin flow front. Therefore, the total computing time is strongly reduced by it. The efficiency test is made with a simple channel flow model. Several application examples are analyzed to demonstrate ability of this method.

• Journal of Biomedical Engineering Research
• /
• v.23 no.3
• /
• pp.189-196
• /
• 2002

Transdermal drug delivery offers an alternative method to the conventional oral and injection delivery method. Its advantages include its ability to deliver drugs directly into systemic circulation. However, there have been restrictions in its application to deliver drugs because of the skin's barrier function. In this study, we try to combine a Sonophoresis and oxygen Pressure method in order to increase the Permeability of the skin. we used water as the compound and by utilizing the skin impedance method. we measured the hydration Permeability of skin Ultrasound was applied using a sonicator(Solcare-U1000. Solco, Korea) operating at a frequency of 1MHz. oxygen Pressure was applied using a compressor(Oxyjet-Pointer, Nora Bode. Germany) operating at a pressure of 2Bar/cm2. Experiment was performed in vivo for 42 People. We divided the subjects into four smaller groups. A different transdermal drug delivery method was applied for each group on the back of their hand. We measured the skin impedance variations on the hand. during a 20-minute time Period. The control group did not show any significant increase or variation of skin impedance to water. In comparison to the control group(Passive diffusion) the hydration Permeability of the ultrasound group and the oxygen Pressure group was approximately 25 and 30 times higher consecutively. Futhermore, the hydration permeability of the combination of ultrasound and oxygen Pressure group was about 70-fold higher in comparison to the control group(passive diffusion) . The results reveal that a combination of ultrasound and oxygen Pressure will significantly enhance transdermal water transport compared when only one of them is used.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.2
• /
• pp.11-25
• /
• 2020

This study is a basic study to improve responsiveness in the event of a disaster in the landside area of the Airport Passenger Terminal, and it investigated the airport emergency plan and the status of emergency response in the event of a disaster by the airline's ground staff. The Airport Emergency Plan examined the airport evacuation plan of Korea's Gimpo Airport and Japan's Ministry of Land, Infrastructure, and Transport, confirming that the domestic airport emergency plan was not specific. In addition, a survey of 100 airline ground employees working at check-in counters found that 69% of the respondents were unaware of their role in disaster situations, 90% were not educated in emergency response and 98% were not trained in disaster training in landside areas. Cross-analysis confirmed significant results in the safety of the airport where the service life worked and whether it was a role in the event of a disaster. Therefore, it is suggested that the airport emergency response plan should be improved to improve the ability to respond to disaster sites in the landside area of the airport passenger terminal and that the airline's ground staff should be educated and trained to enhance disaster response.

• Journal of the Korean Society for Railway
• /
• v.17 no.2
• /
• pp.94-99
• /
• 2014

Recently, trends in new transportation system development have been primarily focused on sustainable and ecofriendly mobility solutions. The personal rapid transit (PRT) system has been considered a promising candidate in this category; its competitiveness is being improved through convergence with cutting-edge electric vehicle (EV) technologies. However, battery-powered vehicles pose difficult technical challenges in attempts to achieve reliable and efficient operation. In this study, a design approach for a solar-power assisted PRT system is presented with small-scale demonstrations aimed at circumventing challenges facing its adoption, as well as helping speed the transition to electric-powered ground transportation. From the results, it is expected that flexible photovoltaic (PV) cells will be able to supply 11% of the power required by the service equipment installed in a prototype vehicle. In particular, flexible photovoltaic (PV) cells are advantageous in terms of cost, weight, and design considerations. Most importantly, the cells' flexibility and attach-ability are expected to give them great potential for extended application in various areas.