• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.1
• /
• pp.147-152
• /
• 2022

This study describes the design and implementation of EGSE for Dehop/Rehop Transponder. The EGSE is a equipment that evaluates Dehop/Rehop Transponder and requires precise and accurate measurement. EGSE consists of a PLDIU and IIU(Instrument Interface Unit), Up/Down converter for L band, Modems to verify the Dehop/Rehop Transponder. The EGSE was used for performance verification and space environment test such as thermal vacuum after developing Dehop/Rehop Transponder.

• Journal of the Korean Society for Railway
• /
• v.19 no.3
• /
• pp.304-313
• /
• 2016

It is necessary to receive telegrams transmitted by transponder tags installed along the track in order to detect the exact position of a high-speed train. In a high-speed railway environment, telegrams can be corrupted by the electromagnetic interference that comes from onboard electric train power equipment or wayside devices. In this study, we verified the railway environment compatibility of a high-speed transponder system developed as a train position detection system. We installed transponder tags on the Honam high-speed line and measured the number of error-free telegrams received from the transponder tag while the HEMU-430X was running at 268km/h~334km/h. Based on the measurement, we estimated the length of the contact zone formed between the transponder reader and tag. Field test results allow us to estimate how many error-free telegrams can be received when HEMU-430X is at speeds up to 400km/h.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.706-712
• /
• 2004

This paper presents the design technique of output multiplexer(OMUX) for the Ka-band satellite transponder. Output multiplexer consists of low-pass filter(LPF), channel filter and manifold. Channel filters adopt dual-mode technique in design for mass and volume reduction and frequency response of channel filters is 4-pole elliptic response for high frequency selectivity. w-pass filters are designed to be of 13th order corrugated type for high rejection characteristic over reception band of satellite transponder. After initial design of channel filters and manifold, we optimized only a few design parameters for fast and easy optimization instead of optimizing all the design parameter. Measured results of a realized output umltiplexer for Ka-band satellite transponder show good agreement with the computed ones.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.842-849
• /
• 2011

The transponder simulator designed to simulate the transponder of military satellite communication systems in the geostationary orbit is required to have time delay function, because of 250 ms delay time, when a radio wave transmits the distance of 36,000 km in free space. But, it is very difficult to develop 250 ms time delay device in the transponder simulator of 100 MHz bandwidth, due to unstable operation of FPGA, loss of memory data for the high speed rate signal processing. Up to date, bandwidth of the time delay device is limited to 45 MHz bandwidth. To solve this problem, we propose the new time delay techniques up to 100 MHz bandwidth without data loss. Proposed techniques are the low speed down scaling and high speed up scaling methods to read and write the external memory, and the matrix structure design of FPGA memory to treat data as high speed rate. We developed the satellite link simulator in 100 MHz bandwidth using the proposed new time delay techniques, implemented to the transponder simulator and verified the function of 265 ms time delay device in 100 MHz bandwidth.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.499-501
• /
• 2011

The phase noise spectrum distribution of COMS Communication transponder was measured and analyzed in the view point of transmission scheme. The effects of phase noise are also analyzed according to the transmission methods. The phase noise of COMS communication transponder may be increased because of utilization of ka-band. So the effects of phase noise will be increased in conditions of high-order transmission mode. The phase noise characteritics are measured for COMS communication transponder with MSM function and the effects for phase noise are analyzed in this paper.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.04a
• /
• pp.93-108
• /
• 1995

SART(Search and Rescue Radar Transponder) is a radar transponder capable of operating in the 9GHz band which is one element of GMDSS. the fundamental function of the SART is to indicate its position. Thus it is so much available to assist SAR operation when an emergency and casualty occur at any sea area, In the thesis we designed manufactured each part of circuit to develop the advanced SART and configured to test the characteristics in many ways, As the results of detailed things we confirmed that the developed SART could be high possibility of production.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.525-528
• /
• 2003

This paper describes the effective and rigorous analytic method of multipath effect which results from insufficient isolation characteristics between adjacent channels in communication payload system. It is very important to analyze the multipath effect for verifying the performance of transponder subsystem that especially is consist of multi channels. Finally the multipath effect are analyzed by calculating the GR and GDR for two adjacent channels of Ku-band transponder subsystem on the Communication & Broadcasting Satellite(CBS).

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.203-206
• /
• 2000

Depending upon the existence of the battery, transponder is divided into active and passive transponder. The passive transponder operates without the inner battery and so has no limitation in its operating range and life time. But the power consumption in the smartcard should be low. In this paper, the analysis and design of the passive smartcard system oerated at 125kHz is presented and is confirmed by simulation and experiment.

• Journal of the Korean Institute of Navigation
• /
• v.19 no.1
• /
• pp.17-32
• /
• 1995

SART(Search and Rescue Radar Transponder) is a radar transponder capable of operating in the 9GHz band, which is one element of GMDSS. The fundamental function of the SART is to indicate its position. Thus, it is so much available to assist SAR operation when an emergency and casualty occur at any sea area. In the thesis, we designed, manufactured each part of circuit to develop the advanced SART and configured to test the characteristics in many ways. As the result of detailed things, we confirmed that the developed SART could be high possibility of production.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.3
• /
• pp.232-242
• /
• 1997

In this paper, we have designed an active radio frequency identification system solving the problems of moving transponder which is identification range expanding and low battery consuming of transponder. Developed radio frequency identification system is a bidirectional data transmission system which is composed of decoder data transmission of 120 kHz and transponder data carrier of 60 kHz which is a subharmonic frequency response with ASK modulation. The experimental results, designed system operating at 9600 bps, show good performances with detecting the 40 km/h moving transponder up to the range of 2 and 15 ${mu}A$ low consuming current.