• Journal of Intelligence and Information Systems
• /
• v.26 no.4
• /
• pp.87-109
• /
• 2020

Currently, thanks to the major stride made in developing wired and wireless communication technology, a variety of IT services are available on land. This trend is leading to an increasing demand for IT services to vessels on the water as well. And it is expected that the request for various IT services such as two-way digital data transmission, Web, APP, etc. is on the rise to the extent that they are available on land. However, while a high-speed information communication network is easily accessible on land because it is based upon a fixed infrastructure like an AP and a base station, it is not the case on the water. As a result, a radio communication network-based voice communication service is usually used at sea. To solve this problem, an additional frequency for digital data exchange was allocated, and a ship ad-hoc network (SANET) was proposed that can be utilized by using this frequency. Instead of satellite communication that costs a lot in installation and usage, SANET was developed to provide various IT services to ships based on IP in the sea. Connectivity between land base stations and ships is important in the SANET. To have this connection, a ship must be a member of the network with its IP address assigned. This paper proposes a SANET-CC protocol that allows ships to be assigned their own IP address. SANET-CC propagates several non-overlapping IP addresses through the entire network from land base stations to ships in the form of the tree. Ships allocate their own IP addresses through the exchange of simple requests and response messages with land base stations or M-ships that can allocate IP addresses. Therefore, SANET-CC can eliminate the IP collision prevention (Duplicate Address Detection) process and the process of network separation or integration caused by the movement of the ship. Various simulations were performed to verify the applicability of this protocol to SANET. The outcome of such simulations shows us the following. First, using SANET-CC, about 91% of the ships in the network were able to receive IP addresses under any circumstances. It is 6% higher than the existing studies. And it suggests that if variables are adjusted to each port's environment, it may show further improved results. Second, this work shows us that it takes all vessels an average of 10 seconds to receive IP addresses regardless of conditions. It represents a 50% decrease in time compared to the average of 20 seconds in the previous study. Also Besides, taking it into account that when existing studies were on 50 to 200 vessels, this study on 100 to 400 vessels, the efficiency can be much higher. Third, existing studies have not been able to derive optimal values according to variables. This is because it does not have a consistent pattern depending on the variable. This means that optimal variables values cannot be set for each port under diverse environments. This paper, however, shows us that the result values from the variables exhibit a consistent pattern. This is significant in that it can be applied to each port by adjusting the variable values. It was also confirmed that regardless of the number of ships, the IP allocation ratio was the most efficient at about 96 percent if the waiting time after the IP request was 75ms, and that the tree structure could maintain a stable network configuration when the number of IPs was over 30000. Fourth, this study can be used to design a network for supporting intelligent maritime control systems and services offshore, instead of satellite communication. And if LTE-M is set up, it is possible to use it for various intelligent services.

• (The) Research of the performance art and culture
• /
• no.41
• /
• pp.285-320
• /
• 2020

This study aims to examine the processes of changes of the two main roles, Sangjwa(the young Buddist monk) chum and Omjung(the monk with a boil on his face) chum, performed in Yangju Byeolsandae Nori, on the basis of Chumsawi (dance-movement). Above all, having studied many artistic remains performed by Jo jong sun, Jung han gyu, Park jun seup, Kim sung tae from 1929 to 1942, two main roles, in which Geodeureum chum is now an essential part in almost all performances, were then played only in Kkaekki chum to Taryong Jangdan without performances of Geodeureum chum. In case of Sangjwa chum, players had performed ad libitum and without restraint only on the basis of five sorts of Kkaekki chum's movements. In Omjung chum, witty remarks along with the drama had become more important factors than dances. Let alone two main roles, other parts then also showed no big changes in dance performance. Performers just tried to maintain its slender existence within stifling atmosphere because of oppressions and restraints during the Japanese imperialism. After the restoration of independence in 1945, Kim sung tae and his disciples made a great effort on the restoration of Talnori. During the Korean war, many players also endeavored to keep a good track of Talnori, teaching and training their young followers. Especially performers such as Park jun seup, Park sang hwan, Kim sung tae, and Lee jang sun put much more efforts on restoring Talnori. From that time, Geodeureum chum began to appear in two main roles' performances. In Sangjwa's performances, Byeogsa ritual dance, which was performed to Taryong Jangdan, changed into performances to Yeombul Jangdan, and Kkaekki chum -originally slow and ritual dance, became very fast and active one. Geodeureum chum, called Yongteulim, was added in Omjung chum, so that dance had more important role in performance. Even at this time, dance movements were not clearly and completely organized and arranged, because Geodeureum chum's performance was not clearly defined as orderly dance movements but was regarded as just a movement. After Geodeureum chum being designated as a cultural treasure, Lee byeong kwon took over the task from Park sang hwan, Sangjwa chum's performer, so Geodeureum chum became much more well organzied, arranged and orderly. Geodeureum chum played by Sangjwa had almost the same order of scenes and movements as Geodeureum chum played by Yeonnip. Based on this performance, the order of dances and movements was consistently arranged and settled. Following Park jun seup's performances, Jangsam was more widely applied and used in Omjung chum than ever before, so Omjung chum became much more organized and arranged. Well-arranged Omjung chum had also almost the same dances and movements as Nojang chum's. Yeonnip and Nojang's performances were not directly and intentionally studied and applied to two main roles in Yangju Byeolsandae Nori. Players seemed to borrow those parts naturally through many times of performances. Through their persistent efforts, Jangdan and dance movements have more clearly and completely been organized, establied, and improved through many years' performances. And dance movement can be performed exactly to Jangdan, so we have more complete and orderly types of dance movements. Thanks to many performers' efforts, Sangjwa chum has been established as one that only top performer can play, and Omjung chum has become an integral part in Yangju Byeolsandae Nori.

• (The) Research of the performance art and culture
• /
• no.43
• /
• pp.47-78
• /
• 2021

This study was written to examine the acceptance of pansori in movies based on pansori, and to explore changes in modern society's perception and expectations of pansori. A pansori is getting the love of the upper and lower castes in the late Joseon period, but loses the status at the time of the Japanese colonial rule and Korean War. In response, the country designated pansori as an important intangible cultural asset in 1964 to protect the disappearance of pansori. Until the 1980s, however, pansori did not gain popularity by itself. After the 2000s, Pansori tried to breathe in with the contemporary public due to the socio-cultural demand to globalize our culture. And now Pansori is one of the most popular cultures in the world today, as the pop band Feel the Rhythm of KOREA shows. The changing public perception of pansori and its status in modern society can also be seen in the mass media called movies. This study explored the process of this change with six films based on pansori, from "Seopyeonje" directed by Lim Kwon-taek in 1993 to the film "The Singer" in 2020. First, the films "Seopyeonje" and "Hwimori" were produced in the 1990s. Both of these films show the reality of pansori, which has fallen out of public interest due to the crisis of transmission in the early and mid-20th century. And in the midst of that, he captured the scene of a singer struggling fiercely for the artistic completion of Pansori itself. Next, look at the film "Lineage of the Voice" in 2008 and "DURESORI: The Voice of East" in 2012. These two films depict the growth of children who perform art, featuring contemporary children who play pansori and Korean traditional music. Pansori in these films is no longer an old piece of music, nor is it a sublime art that is completed in harsh training. It is only naturally treated as one of the contemporary arts. Finally, "The Sound of a Flower" in 2015 and "The Singer" in 2020. The two films constructed a story from Pansori's history based on the time background of the film during the late Joseon Dynasty, when Pansori was loved the most by the people. This reflects the atmosphere of the times when traditions are used as the subject of cultural content, and shows the changed public perception of pansori and the status of pansori.

• Journal of radiological science and technology
• /
• v.37 no.4
• /
• pp.239-246
• /
• 2014

Filter absorbs low-energy X-ray to increase the average energy and reduces patient exposure dose. This study investigates if the materials of Mo and W could be used for the digital imaging device CR by conducting image assessment and dose measurement of SNR, FOM and histogram. In addition, measurement of beam quality was conducted depending on the material of the filter, and at the same time, a proper combination of filters was examined depending on the change in tube voltage (kVp). In regard to entrance skin dose, Mo filter showed the dose reduction by 42~56%, compared to Cu filter. Moreover, Mo filter showed higher transmission dose by around 1.5 times than that of Cu filter. In image assessment, it was found that W was unsuitable to be used as a filter, whereas Mo could be used as a filter to reduce dose without decline in image quality at the tube voltage of 80 kVp or higher. As tube voltage increased, 2.0 mm Al+0.1 mm Mo almost had a similar histogram width to that of 2.0 mm Al+0.2 mm Cu. Therefore, Mo filter can be used at relatively high tube voltage of 80 kVp, 100 kVp and 120 kVp. The SNR of 2.0 mm Al+0.1 mm Mo did not show any significant difference from those of 2.0 mm Al+0.2 mm Cu and 2.0 mm Al+0.1 mm Cu. As a result, if Mo filter is used to replace Cu filter in general radiography, where 80 kVp or higher is used for digital radiation image, patient exposure dose can be reduced significantly without decline in image quality, compared to Cu filter. Therefore, it is believed that Mo filter can be applied to chest X-ray and high tube voltage X-ray in actual clinical practice.

• Progress in Medical Physics
• /
• v.10 no.2
• /
• pp.63-71
• /
• 1999

For the purpose of utilization in 3-D conformal radiotherapy and whole body radiosurgery, the Whole Body 3-Dimensional Topographic Radiation Therapy System has been developed. Whole body frame was constructed in order to be installed on the couch. Radiopaque catheters were engraved on it for the dedicated coordinate system and a MeV-Green immobilizer was used for the patient setup by the help of side panels and plastic rods. By designing and constructing the whole body frame in this way, geometrical limitation to the gantry rotation in 3-D conformal radiotherapy could be minimized and problem which radiation transmission may be altered in particular incident angles was solved. By analyzing CT images containing information of patient setup with respect to the whole body frame, localization and coordination of the target is performed so that patient setup error may be eliminated between simulation and treatment. For the verification of setup, the change of patient positioning is detected and adjusted in order to minimize the setup error by means of comparison of the body outlines using 3 CCTV cameras. To enhance efficiency of treatment procedure, this work can be done in real time by watching the change of patient setup through the monitor. The method of image subtraction in IDL (Interactive Data Language) was used to visualize the change of patient setup. Rotating X-ray system was constructed for detecting target movement due to internal organ motion. Landmark screws were implanted either on the bones around target or inside target, and variation of target location with respect to markers may be visualized in order to minimize internal setup error through the anterior and the lateral image information taken from rotating X-ray system. For CT simulation, simulation software was developed using IDL on GUI(Graphic User Interface) basis for PC and includes functions of graphic handling, editing and data acquisition of images of internal organs as well as target for the preparation of treatment planning.

• Journal of Technology Innovation
• /
• v.26 no.3
• /
• pp.37-68
• /
• 2018

Since the 20th century, automobiles, which are the most common means of transportation, have been evolving as the use of electronic control devices and automotive semiconductors increases dramatically. Automotive semiconductors are a key component in automotive electronic control devices and are used to provide stability, efficiency of fuel use, and stability of operation to consumers. For example, automotive semiconductors include engines control, technologies for managing electric motors, transmission control units, hybrid vehicle control, start/stop systems, electronic motor control, automotive radar and LIDAR, smart head lamps, head-up displays, lane keeping systems. As such, semiconductors are being applied to almost all electronic control devices that make up an automobile, and they are creating more effects than simply combining mechanical devices. Since automotive semiconductors have a high data rate basically, a microprocessor unit is being used instead of a micro control unit. For example, semiconductors based on ARM processors are being used in telematics, audio/video multi-medias and navigation. Automotive semiconductors require characteristics such as high reliability, durability and long-term supply, considering the period of use of the automobile for more than 10 years. The reliability of automotive semiconductors is directly linked to the safety of automobiles. The semiconductor industry uses JEDEC and AEC standards to evaluate the reliability of automotive semiconductors. In addition, the life expectancy of the product is estimated at the early stage of development and at the early stage of mass production by using the reliability test method and results that are presented as standard in the automobile industry. However, there are limitations in predicting the failure rate caused by various parameters such as customer's various conditions of use and usage time. To overcome these limitations, much research has been done in academia and industry. Among them, researches using data mining techniques have been carried out in many semiconductor fields, but application and research on automotive semiconductors have not yet been studied. In this regard, this study investigates the relationship between data generated during semiconductor assembly and package test process by using data mining technique, and uses data mining technique suitable for predicting potential failure rate using customer bad data.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.7-12
• /
• 2018

This study was conducted to determine effects of precooling and storage methods on asparagus spears' quality such as changes of fresh weight and color during simulated export distribution. Two types of precooling methods, air cooling and hydrocooling, were applied prior to packaging by comparing with no precooling as a control. Asparagus spears were packed with oxygen transmission rate (OTR) film for modified atmosphere packaging (MAP) and perforated (PF) film for a conventional packaging. All treatments were stored at $8^{\circ}C$ for 20 hours, and subsequently at $4^{\circ}C$ by final storage day, which is simulated distribution temperature condition from Yanggu, Korea to Shimonoseki, Japan. The half cooling time was 12 minutes for air cooling and 15 seconds for the hydrocooling, indicating precooling process of asparagus spears faster with the hydrocooling. Rates of respiration and ethylene production were lowest with hydrocooling. Fresh weight loss was higher, approximately 11%, at the control condition in conventional storage, compared with the MAP, less than 0.5%. Carbon dioxide and oxygen content in the MAP was in the permissible ranges for asparagus spears under recommended CA/MA conditions under both the air cooling and hydrocooling. Ethylene content in the film package was lower with the precooling treatment. Firmness of stems was lowest with the hydrocooling prior to the MAP. Visual quality, off-odor, and hue angle value were best with hydrocooling prior to the MAP. In conclusion, the combination of hydrocooling with the MAP is effective in preserving quality during the export distribution process.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.3 s.54
• /
• pp.669-678
• /
• 1996

Helicobacter pylori is now recognized as causative agent of chronic gastritis and peptic ulcer, and strongly associated with development of gastric carcinoma. With development of sensitive and specific serologic tests to identify individuals infected with Helicobacter pylori, the epidemiologic study of this diseases has been investigated. But it's transmission route is not established, yet. The purpose of this study is to measure the prevalence of Helicobacter pylori infection in healthy children and young adults and to evaluate related factors for Helicobacter pylori infection in Korea. The seroprevalence of Ig G antibodies to Helicobacter pylori was determined using a Enzyme Linked Immunosorbent Assay and we obtained the information, such as demographic characteristics, monthly household income, numbers of family members in the house, numbers of persons using same room, type of house, and type of drinking water through the questionnaire survey. The observed overall seropositivity rate was 25.7%. The rate is increased progressively from 5.8% in the age group $1\sim3$ years to 44.4% in the age group $20\sim29$years($\chi^2$ for trend, p<0.001). Especially, the rate increased steeply from 6.5% in the age group $4\sim6$ years to 20.8% in the age group $7\sim9$ years, and this suggested that elementary school age was the major acquisition time of Helicobacter pylori infection. In multivariate logistic regression model, age, numbers of family members in the house, and type of house was statistically significant variables for Helicobacter pylori infection. Each odds ratio(93% CI) were as follows; base to age group $1\sim9$ years, age group $10\sim19$ years $3.6(2.0\sim6.4)$, age group $20\sim29$ years $7.3(4.1\sim13.1)$ and base to group of $1\sim3$ family members, group of $4\sim5$ family members $2.1(1.1\sim4.0)$, group of 6 or more family members $2.7(1.3\sim5.4)$ and base to apartment, single and multihouse $1.9(1.1\sim3.5)$. Sex, monthly household income, numbers of persons using same room, and type of drinking water was not statistically significant for Helicobacter pylori infection.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.555-559
• /
• 2012

Manures contain a variety of pathogenic microorganisms that pose a risk to human or animal. On-farm contaminations through contaminated manure were considered likely sources of the pathogen for several outbreak. Pathogenic microorganisms may survive in low numbers during the composting process and subsequently regrow to high levels under favorable conditions. The objective of this study was to investigate effect of temperature on survival of Salmonella enterica and Staphylococcus aureus in livestock manure compost. Commercial livestock manure compost (manure 60%, sawdust 40%) was inoculated with S. enterica and S. aureus. Compost was incubated at four different temperatures (10, 25, 35, and $55^{\circ}C$) for 20 weeks. Samples were taken every week during incubation depending on the given conditions. S. enterica persisted for up to 1 day in livestock manure compost at $55^{\circ}C$, over 140 days at $10^{\circ}C$, 140 days at $25^{\circ}C$, and 70 days at $35^{\circ}C$, respectively. S. aureus persisted for up to 1 day in livestock manure compost at $55^{\circ}C$ and 90 days at $10^{\circ}C$, 70 days at $25^{\circ}C$, and 40 days at $35^{\circ}C$, respectively. The results indicate that S. enterica and S. aureus persisted longer under low temperature condition. S. enterica survived longer than S. aureus at three different temperatures (10, 25, and $35^{\circ}C$). This study will provide useful and practical guidelines to applicators of soil in deciding appropriate handling and time frames for land application of livestock manure compost for sustainable agriculture. Results from these studies provide useful information in identifying manure handling practices to reduce the risk of S. enterica and S. aureus transmission to fresh produce.

• Journal of Chest Surgery
• /
• v.31 no.8
• /
• pp.739-748
• /
• 1998

Background: It has been well documented that transient occlusion of the coronary artery causes myocardial ischemia and finally cell death when ischemia is sustained for more than 20 minutes. Extensive studies have revealed that ischemic myocardium cannot recover without reperfusion by adequate restoration of blood flow, however, reperfusion can cause long-lasting cardiac dysfunction and aggravation of structural damage. The author therefore attempted to examine the effect of postischemic reperfusion on myocardial ultrastructure and to determine the rationales for recanalization therapy to salvage ischemic myocardium. Materials and methods: Young Holstein-Friesian cows(130∼140 Kg body weight; n=40) of both sexes, maintained with nutritionally balanced diet and under constant conditions, were used. The left anterior descending coronary artery(LAD) was occluded by ligation with 4-0 silk snare for 20 minutes and recanalized by release of the ligation under continuous intravenous drip anesthesia with sodium pentobarbital(0.15 mg/Kg/min). Drill biopsies of the risk area (antero-lateral wall) were performed at just on reperfusion(5 minutes), 1-, 2-, 3-, 6-, 12-hours after recanalization, and at 1-hour assist(only with mechanical respiration and fluid replacement) after 12-hour recanalization. The materials were subdivided into subepicardial and subendocardial tissues. Tissue samples were examined with a transmission electron microscope (Philips EM 300) at the accelerating voltage of 60 KeV. Results: After a 20-minute ligation of the LAD, myocytes showed slight to moderate degree of ultrastructural changes including subsarcolemmal bleb formation, loss of nuclear matrix, clumping of chromatin and margination, mitochondrial destruction, and contracture of sarcomeres. However, microvascular structures were relatively well preserved. After 1-hour reperfusion, nuclear and mitochondrial matrices reappeared and intravascular plugging by polymorphonuclear leukocytes or platelets was observed. However, nucleoli and intramitochondrial granules reappeared within 3 hours of reperfusion and a large number of myocytes were recovered progressively within 6 hours of reperfusion. Recovery was apparent in the subepicardial myocytes and there were no distinct changes in the ultrastructure except narrowed lumen of the microvessels in the later period of reperfusion. Conclusions: It is likely that the ischemic myocardium could not be salvaged without adequate restoration of coronary flow and that the microvasculature is more resistant to reversible period of ischemia than subendocardium and subepicardium. Therefore, thrombolysis and/or angioplasty may be a rational method of therapy for coronarogenic myocardial ischemia. However, it may take a relatively longer period of time to recover from ischemic insult and reperfusion injury should be considered.