• Title/Summary/Keyword: transmission technique

검색결과 2,168건 처리시간 0.027초

동기식 버스트 통신시스템 적용을 위한 새로운 반송파 동기 기법에 관한 연구 (A Study on a New Carrier Recovery Algorithm for Coherent Burst-mode Communication Systems)

  • 박성복
    • 한국군사과학기술학회지
    • /
    • 제14권6호
    • /
    • pp.1043-1048
    • /
    • 2011
  • In this paper, a newsynchronization technique applied to burst-mode communication is proposed. A synchronization technique is to estimate carrier frequency and phase offsets in a noisy channel environment. A fundamental problem for estimating the parameters(carrier phase and frequency offsets) in burst-mode transmission is that the ways of pursuing estimation accuracy and transmission efficiency are always trade-off. To solve this problem, a new carrier recovery technique is proposed to improve the transmission efficiency with reliable performance especially at low S/N. In the proposed technique, the synchronization parameters are first estimated based on a data-aided feed-forward estimation scheme. Then, a phase tracker using decision-directed DPLL estimates the phase offset for the data portion of the burst data. From simulation results, it shows fast synchronization with shorter preamble maintaining reasonable BER performance at low S/N.

Surface Intensity 법에 의한 건물내 출입문의 차음성능 현장측정에 관한 연구 (A study on the Measurement of Field Transmission Loss through Doors in Buildings Using the Surface Intensity Method.)

  • 손장열;오재응;김흥식
    • 한국음향학회지
    • /
    • 제4권2호
    • /
    • pp.3-12
    • /
    • 1985
  • The surface intensity method is a relatively new tool which can identify the noise source or path and measure the radiation power. One microphone and one accelerometer are used in this new technique. In this study, this new technique has been used to measure the field transmission loss trough doors. The results of the experiment indicate that the surface intensity method produces reliable data and can be applied to the transmission loss measurement.

  • PDF

Surface Intensity 법에 의한 건물내 출입문의 차음성능 현장측정에 관한 연구 (A study on the Measurement of Field Transmission Loss through Doors in Buildings Using the Surface Intensity Method.)

  • 손장열;오재응;김흥식
    • 한국음향학회지
    • /
    • 제4권2호
    • /
    • pp.3.1-3.1
    • /
    • 1985
  • The surface intensity method is a relatively new tool which can identify the noise source or path and measure the radiation power. One microphone and one accelerometer are used in this new technique. In this study, this new technique has been used to measure the field transmission loss trough doors. The results of the experiment indicate that the surface intensity method produces reliable data and can be applied to the transmission loss measurement.

An Efficient Transmission Coding Technique of Digitized Speech Data

  • Shimamura, Tetsuya;Yaguchi, katsuaki
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -3
    • /
    • pp.1796-1798
    • /
    • 2002
  • Speech transmission is common in many communications systems. In this paper, a technique to reduce the total bits required for expressing the speech data is proposed for the purpose of a packet transmission. A novel coding method is derived based on the concept of finding common information in sequential speech samples. Computer simulations demonstrate that the proposed scheme reduces the total bits re- quired in PCM approximately by half.

  • PDF

Hybrid Diversity-Beamforming Technique for Outage Probability Minimization in Spatially Correlated Channels

  • Kwon, Ho-Joong;Lee, Byeong-Gi
    • Journal of Communications and Networks
    • /
    • 제9권3호
    • /
    • pp.274-281
    • /
    • 2007
  • In this paper, we present a hybrid multi-antenna technique that can minimize the outage probability by combining the diversity and beamforming techniques. The hybrid technique clusters the transmission antennas into multiple groups and exploit diversity among different groups and beamforming within each group. We analyze the performance of the resulting hybrid technique for an arbitrary correlation among the transmission antennas. Through the performance analysis, we derive a closed-form expression of the outage probability for the hybrid technique. This enables to optimize the antenna grouping for the given spatial correlation. We show through numerical results that the hybrid technique can balance the trade-offs between diversity and beamforming according to the spatial correlation and that the optimally designed hybrid technique yields a much lower outage probability than the diversity or beamforming technique does in partially correlated fading channels.

DSSS-Based Channel Access Technique DS-CDMA for Underwater Acoustic Transmission

  • Lee, Young-Pil;Moon, Yong Seon;Ko, Nak Yong;Choi, Hyun-Taek;Huang, Linyun;Bae, Youngchul
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • 제15권1호
    • /
    • pp.53-59
    • /
    • 2015
  • This paper proposes a novel method for acoustically and wirelessly transmitting data underwater with a high transmission rate. The method uses the most promising physical layer and multiple access technique (i.e., the code division multiple channel access technique) to divide the channel into subchannels. Data is transmitted through these subchannels. The codes are pseudo-random noise (PN) sequences. In the spread-spectrum technique, a signal such as electrical, electromagnetic, acoustic signal generated in a particular bandwidth is deliberately spread in the frequency domain, which results in a signal with a wider bandwidth. This paper reviews the possibility of application of the direct-sequence code division multiple access (DS-CDMA) technique in an underwater system using MATLAB. As the result of our review, we recognize that the DS-CDMA technique can be applied to underwater environments.

복호 및 최대수신결합을 반복적으로 이용한 Multiplexed STBC OFDM 성능향상 기법 (Performance Enhancement Technique using Iterative Decoding and Maximal Ratio Receive Combining Technique for Multiplexed STBC OFDM Systems)

  • 정혁구
    • 한국통신학회논문지
    • /
    • 제30권5C호
    • /
    • pp.391-397
    • /
    • 2005
  • 전송 다이버시티 기법인 시공간 블록코드 (STBC) 부호화 방법이 소개된 이후, 전송 데이터 속도를 향상시키기 위하여 기지국에서 전송다이버시티를 사용하는 MIMO 기술 연구가 활발히 진행되어 왔다. Multiplexed STBC OFDM 시스템은 두 개의 송신 안테나를 하나의 그룹으로 하여 여러 개의 그룹이 동시에 전송하는 방식이며, 수신기에서는 원하는 STBC OFDM 그룹 신호이외의 다른 그룹들의 간섭신호를 억제하여 데이터를 검출하는 방식이다. 본 논문에서는 multiplexed STBC OFDM 시스템에 적용 가능한 복호 및 최대수신결합을 반복적으로 이용하는 새로운 알고리즘을 제안하고, 모의 실험을 통하여 그 성능이 기존의 방법보다 우수함을 확인하였다.

CRLH 전송 선로를 이용한 공진 기법의 전력 결합 기술 (A Resonance Power Combining Technique Using CRLH-Transmission Line)

  • 김일규;김영;권상근;윤영철
    • 한국전자파학회논문지
    • /
    • 제20권8호
    • /
    • pp.673-679
    • /
    • 2009
  • 본 논문에서는 CRLH 전송 선로를 이용한 공진 기법의 전력 결합 기술을 제안하였다. 사용된 공진 기법의 회로는 증폭기의 정합과 전력 결합 역할을 하는 병렬 캐패시턴스 그리고 증폭기들의 전력 결합을 위한 전송 선로로 구성되어 있고, 여기에 사용된 전송 선로는 CRLH(Composite Right/Lefi-Handed) 전송 선로로 구현함으로써 회로의 크기를 감소시켰다. 이 기술의 유용성을 확인하기 위해서 제안한 전력 결합 기술을 이용한 2단 증폭기를 구현 및 측정한 결과, 단일 증폭기와 이득은 동일하고, 출력 전력은 2.2 dB 증가하였으며, 기존의 RH 전송 선로를 이용한 전력 결합 증폭기보다 면적이 78.3 % 감소하였다.

PCB 전송선에서 비아 펜스의 효과 분석 (Analysis of Via Fence Effects in PCB Transmission Lines)

  • 김종호;박상욱;주재철;박동철
    • 한국전자파학회논문지
    • /
    • 제16권4호
    • /
    • pp.402-409
    • /
    • 2005
  • 아날로그 및 디지털 시스템에서 인쇄회로기판에 있는 전송선들의 상호 결합은 장비의 성능을 저하시킬 수 있다. 이 논문에서는 전송선들 사이에 추가로 전송선을 삽입하고 비아 홀을 통해 접지면에 직접 연결시킨 비아펜스의 영향을 해석하기 위한 방법을 제안하였다. 이 방법은 전송선 부분을 위한 회로 개념과 비아 홀 부분을 위한 임피던스 모델링으로 이루어졌고 각 부분을 ABCD 파라미터로 나타내어 직렬 연결하였다. 마지막으로 이 방법에 의한 시뮬레이션 결과를 측정 결과와 비교하여 방법의 타당성을 입증하였다.

순차적 클러스터링기법을 이용한 송전 계통의 지역별 그룹핑 (Regional Grouping of Transmission System Using the Sequential Clustering Technique)

  • 김현홍;이우남;박종배;신중린;김진호
    • 전기학회논문지
    • /
    • 제58권5호
    • /
    • pp.911-917
    • /
    • 2009
  • This paper introduces a sequential clustering technique as a tool for an effective grouping of transmission systems. The interconnected network system retains information about the location of each line. With this information, this paper aims to carry out initial clustering through the transmission usage rate, compare the similarity measures of regional information with the similarity measures of location price, and introduce the techniques of the clustering method. This transmission usage rate uses power flow based on congestion costs and similarity measurements using the FCM(Fuzzy C-Mean) algorithm. This paper also aims to prove the propriety of the proposed clustering method by comparing it with existing clustering methods that use the similarity measurement system. The proposed algorithm is demonstrated through the IEEE 39-bus RTS and Korea power system.