• 제목/요약/키워드: transmission power

검색결과 5,780건 처리시간 0.041초

Sequence Skipping 방법을 이용한 MPLS 라우터의 VC 통합기능 스케쥴러의 성능 향상에 관한 연구 (On the Performance Enhancements of VC Merging-capable Scheduler for MPLS Routers by Sequence Skipping Method)

  • 백승찬;박도용;김영범
    • 전기전자학회논문지
    • /
    • 제5권1호
    • /
    • pp.111-120
    • /
    • 2001
  • VC 통합은 동일한 VC 레이블을 가진 VC들에서 각 VC의 해당 셀들을 구분하는 기능이 필요하다. 이러한 확인절차(identification process)를 돕는 다양한 접근 방법들이 제안되어 왔지만, 대부분이 추가적인 버퍼링을 필요로 하거나 프로토콜상의 오버헤드나 전송 지연을 가져옴으로써 QoS 규정을 만족시키기에 어려웠다. 이러한 단점을 극복하는 동시에 VC-통합을 지원하는 스케줄러(VCMS)가 제안되었으나 모든 VC들이 통합되거나 유입 트래픽이 매우 작은 경우 snoop하기 위한 비통합 셀들이 부족하게 되는 현상이 발생한다. 이 경우 비어 있는 슬롯들을 채우기 위해 특별한 제어 셀들을 사용하게 되나 제어 셀의 개수가 많아지면 셀 유실률이 높아질 수 있으며 부가적인 패킷 전송지연이 발생할 수 있다. 본 논문에서는 이러한 문제점을 극복하기 위하여 비어있는 큐를 갖는 VC의 시퀀스들은 건너뛰고 단지 이를 표시하기 위한 SS 셀만을 채워 넣는 Sequence Skipping(SS)을 제안하였다. 시뮬레이션을 통해 SS가 셀 유실률과 평균 패킷 전송지연을 줄일 수 있으며 따라서 VC 통합에 적합한 방안임을 보인다.

  • PDF

수송기관용 오일의 화재위험성에 관한 연구 (A Study on the Fire Hazard of Transportation Oil)

  • 박영주;황미정;이해평;이승철;이창현
    • 한국안전학회지
    • /
    • 제29권3호
    • /
    • pp.114-120
    • /
    • 2014
  • The purpose of this study is to conduct the study of the combustion and thermal characteristics through transportation oil for the analysis of fire hazard. Transportation oil breaks down into fuels such as diesel for civilian demands, gasoline, DF1(diesel for military), high sulfur diesel(for marine), kerosene and JP1(for aviation), and lubricants like brake fluid, power steering oil, engine oil, and automatic and manual transmission oil. The experiments of flash point, ignition point, flame duration time, heat release rate were carried out using TAG closed cup flash point tester(AFP761), Cleveland open cup auto flash point analyzer(AFP762), KRS-RG-9000 and Dual cone calorimeter. As a result, the fuel's ignition points were lower than lubricants, especially that of gasoline was not conducted as it has below zero one. Gasoline has the highest ignition point of about $600^{\circ}C$, while the other fuels showed $400{\sim}465^{\circ}C$. For flame duration time, lubricants had over 300 seconds, but fuels had less than 300 seconds except high sulfur diesel(350 seconds). Total heat release rate ranged $287{\sim}462kW/m^2$ for lubricants and gasoline showed the highest total heat release rate, $652kW/m^2$.

HAPS와 NGSO 시스템의 Service Link상의 간섭영향 분석 (The Analysis on the Effects of Interference between HAPS and NGSO system in the Service Link)

  • 함형일;김규환;양의장;강영훙
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2002년도 추계종합학술대회
    • /
    • pp.151-155
    • /
    • 2002
  • 본 논문에서는 성층권 통신 시스템(HAPS)과 NGSO 시스템간 간섭 영향을 두 가지의 경우로 나누어서 분석한다. 한가지는 HAPS시스템이 NGSO시스템에 미치는 간섭이며, 다른 한가지는 NGSO시스템이 HAPS 시스템에 미치는 간섭영향이다. 먼저 LEO 이동국이 받는 간섭은 LEO와 HAPS의 사용자 수가 같을 경우는 -8.82dB로 초과를 하였으나, 1/10, 1/100일 때는 각각 -16.9dB, -20.3dB로 낮아짐을 알 수 있었다. HAPS 이동국이 받는 간섭의 경우에는 LEO위성이 87$^{\circ}$ 일 때 LEO와 HAPS 사용자가 동일일 경우는 2200명인 경우에서부터 간섭 기준을 초과하지만 HAPS사용자가 LEO의 1/10, 1/100인 경우는 간섭 기준을 초과하지 않음을 알 수 있다. 따라서, 이러한 간섭의 영향을 줄이기 위해서는 두 시스템의 송신 전력과 사용자 수 그리고 셀 반경의 적절한 설정이 중요하다.

  • PDF

생체 의학 빅 데이터 분석을 위한 생체 정보 수집 시스템 (A biometric information collecting system for biomedical big data analysis)

  • 임담섭;홍선학;구민오;민덕기
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2013년도 추계학술대회
    • /
    • pp.513-516
    • /
    • 2013
  • 본 논문에서는 지능화된 의료 정보 시스템 구축 및 의료 빅 데이터 처리를 위한 생체 정보의 수집, 전송, 관리와 같은 일련의 체계화된 의료 정보 시스템의 구현 및 설계를 제공한다. 본 논문에서 제시하는 의료 정보 시스템은 소형화 및 저 전력화된 생체 정보 수집 센서와 이를 단계적으로 수집하여 중앙 의료 정보 시스템으로 전송하는 데이터 정보 전송 장치 및 저장 장치로 구성되어 있다. 기존 의료 정보 구축 환경은 간호사나 의사의 수기 작성에 의한 수집 및 비 자동화된 방법에 의한 구축으로 관리되어짐에 따라 장기적 관점에서의 의료 품질 향상 및 연구가 불가능하였다. 하지만, 본 논문에서 제시하는 의료 정보 수집 시스템을 통하여 인적 오류 극복 및 정보 수집 범위의 극대화를 추구할 수 있다. 더 나아가, 실시간 의료 정보 빅 데이터 분석 시스템과의 결합을 통해 환자 상태 분석 및 처방과 의료 품질 개선 전략 수립을 가능케 하며, 의료 정보 네트워크 구축을 통해 대형화 되어가는 의료 시장에 빠르게 대처할 수 있다.

  • PDF

화생방 보호의 성능평가를 위한 무선 실시간 가스 검출기 개발 (Development of Wireless Real-Time Gas Detector System for Chemical Protection Performance Test of Personal Protective Equipment)

  • 가동하
    • 한국군사과학기술학회지
    • /
    • 제23권3호
    • /
    • pp.294-301
    • /
    • 2020
  • Man-In-Simulant Test(MIST) provides a test method to evaluate chemical protective equipments such as protective garments, gloves, footwear and gas mask. The MIST chamber is built to control concentration of chemical vapor that has a activity space for two persons. Non-toxic methyl-salicylate(MeS) is used to simulate chemical agent vapor. We carried out to measure inward leakage MeS vapors by using passive adsorbent dosimeter(PAD) which are placed on the skin at specific locations of the body while man is activity according to the standard procedure in MIST chamber. But more time is required for PADs and there is concern of contamination in PADs by recovering after experiment. Therefore detector for measuring in real time is necessary. In order to analyze in real time the contamination of the personal protective equipment inside the chemical environment, we have developed a wireless real-time gas detector. The detector consists of 8 gas-sensors and 1 control-board. The control-board includes a CPU for processing a signal, a power supply unit for biasing the sensor and Bluetooth-chipset for transmission of signals to external PC. All signals from gas-sensors are converted into digital signals simultaneously in the control-board. These digital signals are stored in external PC via Bluetooth wireless communication. The experiment is performed by using protective equipment worn on manikin. The detector is mounted inside protective equipment which is capable of providing a real-time monitoring inward leakage MeS vapor. Developed detector is demonstrated the feasibility as real-time detector for MIST.

메타물질 구조 다중대역 6단자 위상상관기 설계 및 제작 (Design and fabrication of multi-band six-port phase correlator using metamaterial)

  • 김영완
    • 한국정보통신학회논문지
    • /
    • 제14권12호
    • /
    • pp.2615-2621
    • /
    • 2010
  • 본 논문에서는 메타물질 구조 다중대역 6단자 위상상관기를 설계하고 제작하였다. 이중 주파수 대역에서 신호를 수신 처리할 수 있는 집중소자형 메타물질 구조를 해석하고, 해석된 결과를 기반으로 다중대역 직접변환 수신 전처리기에 적합한 소형화 메타물질 구조 6단자 위상상관기를 제안하고 구현하였다. 다중대역 6단자 위상상관기를 구성하는 저항성 전력 분배기와 메타물질 $90^{\circ}$ 하이브리드 결합기의 산란 계수를 기반으로 동일한 특성을 갖는 6단자 위상상관기 구성 요소를 제작하고 측정하였다. 측정된 메타물질 구조 6단자 위상상관기는 모의실험 결과와 일치하였으며, 이중 주파수 대역에서 -20 dB 이하의 정합과 1 dB 이내의 전달 이득차, 그리고 ${\pm}4.1^{\circ}$ 이하의 전달 위상차 특성으로 양호한 다중대역 6단자 위상상관기 성능을 나타내었다.

CODLOG 기반 ECS 검증용 함정 추진 시뮬레이터 개발 (Development of Naval Ship Propulsion System Simulator for CODLOG based ECS Verification)

  • 장재희;김동진;김민곤;오진석
    • 한국정보통신학회논문지
    • /
    • 제21권9호
    • /
    • pp.1796-1807
    • /
    • 2017
  • 국내 함정 추진체계는 기계식 추진체계에서 복합식 추진체계로 넘어가는 단계에 위치하고 있으며, 추진체계가 복잡해지면서 함정 추진체계의 제어 감시 기능을 하는 ECS의 기능이 중요해질 것으로 예상된다. 최근 국내에서 ECS(Engineering Control System) 개발의 국산화가 진행되면서 ECS 개발 과정에서 신뢰성 및 안정성에 대한 검증이 요구되고 있다. 제안하는 시뮬레이터는 HILS로 구성되었으며, 모의 목적에 따라 동력전달을 모의하는 축물리모델과, 장비제어를 모의하는 제어기모델, ECS와 통신하는 통신모델로 나누어진다. 본 논문에서는 복합식 추진체계인 CODLOG 체계에 대하여 ECS 검증용 시뮬레이터를 개발하고 시나리오를 설정하여 시뮬레이션을 수행하였다

GaN 기반 LED구조의 p-GaN층 성장온도에 따른 광학적, 결정학적 특성 평가 (Optical and microstructural behaviors in the GaN-based LEDs structures with the p-GaN layers grown at different growth temperatures)

  • 공보현;김동찬;김영이;한원석;안철현;최미경;조형균;이주영;김홍승
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
    • /
    • pp.144-144
    • /
    • 2008
  • Blue light emitting diode structures consisting of the InGaN/GaN multiple quantum wells were grown by metalorganic chemical vapor deposition at different growth temperatures for the p-GaN contact layers and the influence of growth temperature on the emission and microstructural properties was investigated. The I-V and electroluminescence measurements showed that the sample with a p-GaN layer grown at $1084^{\circ}C$ had a lower electrical turn-on voltage and series resistance, andenhanced output power despite the low photoluminescence intensity. Transmission electron microscopy (TEM) revealed that the intense electro luminescence was due to the formation of a p-GaN layer with an even distribution of Mg dopants, which was confirmed by TEM image contrast and strain evaluations. These results suggest that the growth temperature should be optimized carefully to ensurethe homogeneous distribution of Mg as well as the total Mg contents in the growth of the p-type layer.

  • PDF

배전자동화시스템 통신서비스를 위한 이중화 통신망 보호절체 알고리즘 연구 (A Study on the Protection Switching Mechanism for Distribution Automation System Ethernet Networks Service of Distribution Automation System)

  • 유남철;김재동;오재곤
    • 전기학회논문지
    • /
    • 제62권6호
    • /
    • pp.744-749
    • /
    • 2013
  • The protection switching technology is widely adopted in the fiber-optical transmission equipments based on TDM(Time Division Multiplexing), such as PDH, SDH/SONET. A variety of protection switching algorithms for Ethernet networks and the progress of standardization are summarized in the document. There are several kinds of protection switching algorithms for Ethernet networks, such as STP, RSTP, MSTP and etc. However, since Ethernet signal move through detour route, it causes much time to recover. Accordingly, it is difficult to secure a usability of Ethernet networks and QOS(Quality of Service). Also, if the protection switching protocol standardized by IEEE and ITU-T is used, it remains a inherent network switching time for protection. Therefore, a specific protection switching algorithm for Ethernet are needed for seamless and stable operation of Ethernet networks service for Distribution Automation System(DAS). A reliable protection algorithm with no switching delay time is very important to implement Self-healing service for DAS. This study of FPGA based protection switching algorithm for Ethernet networks shows that in case of faults occurrence on distribution power network, immediate fault isolation and restoration are conducted through interaction with distribution equipments using P2P(Peer to Peer) communication for protection coordination. It is concluded that FPGA based protection switching algorithm for Ethernet networks available 0ms switching time is crucial technology to secure reliability of DAS.

Dynamic Compliance and its Compensation Control of HIVC Force Control System

  • Ba, Kai-xian;Yu, Bin;Li, Wen-feng;Wang, Dong-kun;Liu, Ya-liang;Ma, Guo-liang;Kong, Xiang-dong
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권2호
    • /
    • pp.1008-1020
    • /
    • 2018
  • In this paper, the dynamic compliance and its compensation control of the force control system on the highly integrated valve-controlled cylinder (HIVC), the joint driver of the hydraulic drive legged robot, is researched. During the robot motion process, the outer loop dynamic compliance control is applied on the base of hydraulic control inner loop and most inner loop control are the force or torque closed loop control. While the dynamic compliance control effectiveness of outer loop can be affected by the inner loop self-dynamic-compliance. Based on this problem, the dynamic compliance series composition theory of HIVC force control system as well as the analysis of its self-dynamic-compliance is proposed. And then the paper comes up with the compliance-enhanced control, which is a compound compensation control method of dynamic compliance with multiple series branches. Finally, the experiment results indicate that the control method mentioned above can enhance the dynamic compliance of HIVC force control system observably. This provides the compensation control method of inner loop dynamic compliance for the outer loop compliance control requiring the high accuracy and high robustness for the robot.