• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1041-1047
• /
• 1997

The influence of $\omega$-phenylalkylammonium salt on the critical micelle concentration (CMC) of SDS has been examined using the electric conductivity method. CMC of SDS exhibited the tendency to decrease with the length of alkyl group of additives. The effect of temperature on CMC of SDS in additive solutions has been observed in the range of $18^{\circ}C-50^{\circ}C$. The free energy(${\Delta}G_m^{\circ}$) for the micellization of SDS is negative and the entropy(${\Delta}S_m^{\circ}$) is a large positive value. The enthalpy(ΔHm0is positive in low temperature($18^{\circ}C$) and negative in high temperature($>25^{\circ}C$). In the prensence of organic additives, the micellization of SDS was considered as a spontaneous process and to involve a phase transition. The values of ΔGm0has shown the tendency to increase but the values of ${\Delta}S_m^{\circ}$ and ${\Delta}H_m^{\circ}$ to decrease with the length of alklyl group of additive salts. The changes in ${\Delta}\kappa$(difference of specific conductivity) with increasing mole ratio of additives in the mixed solutions indicated the formation of mixed micelles between SDS and additives. The effect of the length of alkyl chain on the micellization of SDS demonstrated the penetration of organic additives into the palisade layer of the SDS micelle.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.1
• /
• pp.58-66
• /
• 2010

In this paper, we have constructed high-resolution topographical map of macro-tidal Malipo beach through integration of terrestrial LiDAR measurement and MBES survey data at inter-tidal zone. To acquire the enough information of inter-tidal zone, we have done terrestrial LiDAR measurement mounted on the roof of vehicle with DGPS through go-stop-scan method at the ebb tide and MBES depth surveying with tide gauge and eye staff measurement for tide correction and MSL calculation at the high tide all together. To integrate two kinds of data, we have unified the vertical coordination standard to Incheon MSL. The mean error of overlapped inter-tidal zone is about 2~6 cm. To verify the accuracy of terrestrial LiDAR, RTK-DGPS measurement have done simultaneously and the difference of Z value RMSE is about 4~7 cm. The resolution of Malipo topographical map is 50 cm and it has constructed to DEM (Digital Elevation Model) based on GIS. Now it has used as an input topography information for the storm-surge inundation prediction models. Also it will be possible to use monitoring of beach process through the long-term periodic measurement and GIS-based 3D spatial analysis calculating the erosion and deposition considering with the artificial beach transition and coastal environmental parameters.

• Development and Reproduction
• /
• v.13 no.3
• /
• pp.183-190
• /
• 2009

In mammals, puberty is a dynamic transition process from infertile immature state to fertile adult state. The neuroendocrine aspect of puberty is started with functional activation of hypothalamus-pituitary-gonadal hormone axis. The timing of puberty can be altered by many factors including hormones and/or hormone-like materials, social cues and metabolic signals. For a long time, attainment of a particular body weight or percentage of body fat has been thought as crucial determinant of puberty onset. However, the precise effect of high-fat (HF) diet on the regulation of hypothalamic GnRH neuron during prepubertal period has not been fully elucidated yet. The present study was undertaken to test the effect of a HF diet on the puberty onset and hypothalamic gene expressions in immature female rats. The HF diet (45% energy from fat, HF group) was applied to female rats from weaning to around puberty onset (postnatal days, PND 22-40). Body weight and vaginal opening (VO) were checked daily during the entire feeding period. In the second experiment, all animals were sacrificed on PND 36 to measure the weights of reproductive tissues. Histological studies were performed to assess the effect of HF diet feeding on the structural alterations in the reproductive tissues. To determine the transcriptional changes of reproductive hormone-related genes in hypothalamus, total RNAs were extracted and applied to the semi-quantitative reverse transcription polymerase chain reaction (RT-PCR). Body weights of HF group animals tend to be higher than those of control animals between PND 22 and PND 31, and significant differences were observed PND 32, PND 34, PND 35 and PND 36 (p<0.05). Advanced VO was shown in the HF group (PND $32.8{\pm}0.37$ p<0.001) compared to the control (PND $38.25{\pm}0.25$). The weight of ovaries (p<0.01) and uteri (p<0.05) from HF group animals significantly increased when compared to those from control animals. Corpora lutea were observed in the ovaries from the HF group animals but not in control ovaries. Similarly, hypertrophy of luminal and glandular uterine epithelia was found only in the HF group animals. In the semi-quantitative RT-PCR studies, the transcriptional activities of KiSS-1 in HF group animals were significantly higher than those from the control animals (p<0.001). Likewise, the mRNA levels of GnRH (p<0.05) were significantly elevated in HF group animals. The present study indicated that the feeding HF diet during the post-weaning period activates the upstream modulators of gonadotropin such as GnRH and KiSS-1 in hypothalamus, resulting early onset of puberty in immature female rats.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.585-592
• /
• 2016

Visualization was done by using $CH^*$ chemiluminescence images and PMT measurements in order to understand the origin of fluctuating pressure and chemical luminosity at about 500 Hz frequency even in stable combustion, which was observed in recent experimental tests, and to find the physical correlation leading to Low Frequency Instability(LFI) in terms of phase angle. In stable combustion, chemical reactions are distributed along the shear layer flow showing a negative coupling(about 180 degree in phase angle) with combustion pressure. However, phase difference is shifted to a positive coupling showing less than 90 degree in unstable case. Also a periodic change in the distribution of chemical reactions is observed along with local flame extinction and the appearance of big scale vortex flow. In the transition to LFI, local flame extinction and small vortex flow start to appear in a row. As seen in the bluff body wake in reactive flow, the periodic appearance of vortex flow seems to share the same physical process of BVK(Bernard Von Karman) instability generation. Thus, the appearance of local extinction in 500 Hz fluctuations is gradually amplified to complete extinctions of about 20 Hz, and it leads into LFI.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.265-279
• /
• 2010

A color image requires at least three color channels to obtain the full color image. However the image sensor obtains only the intensity of the brightness, that is, three image sensors are required for every pixel to capture the full color image. Since the image sensor is quiet expensive, most of digital still cameras adopt single image sensor array with color filter array (CFA) to reduce the size and the cost. Since the image obtained using single sensor array has only one color component per pixel, we need to reconstruct the missing two color components to obtain the full color image. We call this process as color filter interpolation or demosaicking. In this paper, demosaicking algorithm composed of two large step is proposed. Proposed algorithm is combined with several different algorithms such as Edge-directed demosaicking, Second-order gradients as correction terms, Smooth hue transition Interpolation, etc. The simulation results show that the proposed algorithm performs much better than the state-of-the-art demosaicking algorithms in terms of both subjective and objective qualities.

• Journal of Gifted/Talented Education
• /
• v.21 no.2
• /
• pp.391-405
• /
• 2011

The nature of science has been recognized in a great deal in the field of science education. However, only few innovative programs are offered for science-gifted students to improve their recognition of the nature of science. The current study describes and analyzes science-gifted students' understandings of the nature of science (NOS). In addition, the study looks into contradictory views among the aspects of NOS, which are fundamental data in constructing target programs on NOS for science gifted students. Data used in this study were collected from 73 middle school science-gifted students using an open-ended questionnaire, VNOS. The results of this study showed that the participants' understanding of NOS was significantly distributed on naive or transition view except for 'tentative NOS', and the results revealed inconsistent view among the aspects of NOS. This study proposes two suggestions to enhance the recognition of science-gifted on NOS of science to informed state and to have consistent perspectives with other areas. First, the role of experiment has to be changed-it should be the process in constructing scientific knowledge rather than an instrument to check scientific knowledge to transform perspective on experimental data and scientific knowledge. Second, various opportunities must be provided to science-gifted students, so they can experience the culture and community of scientists and science to gain a wider insight of science.

• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.19-27
• /
• 2005

High-speed melt spinning of syndiotactic polystyrene was carried out using high and low molecular weight poly­mers, HM s-PS and LM s-PS, at the throughput rates of 3 and 6 g/min. The effect of take-up velocity on the structure and properties of as-spun fibers was investigated. Wide angle X-ray diffraction (WAXD) patterns of the as-spun fibers revealed that the orientation-induced crystallization started to occur at the take-up velocities of 2-3 km/min. The crystal modification was a-form. Birefringence of as-spun fibers showed negative value, and the absolute value of birefringence increased with an increase in the take-up velocity. The cold crystallization temperature analyzed through the differential scanning calorimetry (OSC) decreased with an increase in the take-up velocity in the low speed region, whereas as the melting temperature increased after the on-set of orientation-induced crystallization. It was found that the fiber structure development proceeded from lower take-up velocities when the spinning conditions of higher molecular weight and lower throughput rate were adopted. The highest tensile modulus of 6.5 GPa was obtained for the fibers prepared at the spinning conditions of LM s-PS, 6 g/min and 5 km/min, whereas the highest tensile strength of 160 MPa was obtained for the HM s-PS fibers at the take-up velocity of 2 km/min. Elongation at break of as-spun fibers showed an abrupt increase, which was regarded as the brittle-duc­tile transition, in the low speed region, and subsequently decreased with an increase in the take-up velocity. There was a uni­versal relation between the thermal and mechanical properties of as-spun fibers and the birefringence of as-spun fibers when the fibers were still amorphous. The orientation-induced crystallization was found to start when the birefringence reached -0.02. After the starting of the orientation-induced crystallization, thermal and mechanical properties of as-spun fibers with similar level of birefringence varied significantly depending on the processing conditions.

• Journal of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.326-331
• /
• 1989

Superconducting fiber of high Tc $YBa_2Cu_3O_{7-{\sigma}}$ was successfully prepared by the sol-gel method. The stoichiometric mixture of Y, Ba and Cu nitrates was dissolved in water, to which citric acid solution was added. Then ammonium hydroxide was added to the mixture in order to increase the pH to a value between 5.8 and 6.2. The mixture was heated carefully to form a homogeneous colloid sol at 358 K. The solution was viscous enough to draw a long gel fiber, which was then heated at 1223K for 8 hrs. under oxygen partial pressure of $Po_2$ = 1 atm., cooled slowly and annealed at 723K for 13 hrs.. The reacted superconducting sample maintained a fiber form with some shrinkage of its volume. The superconducting transition temperatures (Tc, onset and Tc, offset) of $YBa_2Cu_3O_{7-{\sigma}}$ have been determined to be approximately 95K and 82K, respectively. The superconducting phase was also confirmed by Meissner effect at liquid nitrogen boiling temperature.

• Journal of the Korean Magnetics Society
• /
• v.17 no.1
• /
• pp.47-50
• /
• 2007

[ $ZnCr_2O_4$ ] shows geometrically frustrated magnet. Recently, $CoCr_2O_4$ has been investigated for multiferroic property and dielectric anomalies by spin-current model. Polycrystalline $CoCr_2O_4$ and $CoCrFeO_4$ compounds was prepared by wet-chemical process. Crystallographic and magnetic properties of $CoCr_2O_4$ and $CoCrFeO_4$ were investigate by using the x-ray diffractometer(XRD), vibrating sample magnetometer(VSM), superconducting quantum interference device magnetometer(SQUID), and $M\"{o}ssbauer$ spectroscopy. The crystal structure was found to be single-phase cubic spinel with space group of Fd3m. The lattice constants of $CoCr_2O_4$ and $CoCrFeO_4$ $a_0$ were determined to be 8.340 and 8.377 ${\AA}$, respectively. The ferrimagnetic transition temperature for the both samples were observed at 97 K and 320 K. The $M\"{o}ssbauer$ absorption spectra at 4.2 K show that the well developed two sextets are superposed with small difference of hyperfine field($H_{hf1}=507\;and\;H_{hf2}=492\;kOe$). Isomer shift values($\delta$) of the two sextets are found to be 0.33 and 0.34 mm/s relative to the Fe metal, respectively, which are consistent with the high spin $Fe^{3+}$ charge state.

• Journal of Service Research and Studies
• /
• v.7 no.4
• /
• pp.15-38
• /
• 2017

The purpose of this study is to look into the consumers who show the consumption patterns of brand switching and repeated purchasing, find the decision factors of their brand switching and repeated purchasing, analyze the difference in marketing response variables being represented as corporate promotion activities in the brand switching and repeated purchasing process, and provide a suggestion to apply the result to marketing Therefore, it tries to help the firms, which develop push marketing as the result of excessive competition between distributors and sales competition focusing on external appearance, recognize consumers as individual substances; to propose proper efficient promotion activities; to let consumers increase loyalty to their trademark and continue to purchase their products repeatedly; and to induce competitor brand consumers to do brand switching. The results of this study are presented as follows: First, consumers who prefer events, price discount, samples, and product premium which means the products with brand or logo on them had the feature of repeated purchasing. Secondly, service benefit, point-type promotion, cost-saving satisfaction didn't affect brand switching, and only the consumers who prefer coupon-type promotion did brand switching. Thirdly, a distribution type produced the moderating effect between the repeated purchasing and coupon and coupon-type promotion, and between brand switching and service benefit.