• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.261-273
• /
• 2011

Recently, the demands for steel frame are increasing because of the trend and due to the demand for bigger and higher buildings. In the analysis of typical steel frame, connections are based on the idealized fixed or pinned connection. A fixed connection assumes that the relative angle of each member before deformation is the same after the transformation. Therefore, the stiffener reinforces the connection to sufficient rigidity and stability of the panel zone. In the economical aspect, however, the necessity of connection that the stiffener reinforcement has omitted is increasing due to the excessive production as well as labor costs of connection. In contrast, pinned connection is assumed that bending moments between the beams and columns do not transfer to each member. This is easy to make in the plant and the construction is simple. However, the structural efficiency is reduced in pinned connection because connection cannot transfer moments. The introduction of this semirigid process can decide efficient cross-sectional dimensions that promote ease in the course of structural erection, as performed by members in the field-a call for safety in the entire frame. Therefore, foreign countries exert efforts to study the practical behavior and the results are applied to criterion. This paper analyzes the semirigid connection of domestic steel by design specifications of AISC/LRFD and make data bank that pertain to each steel. After wards, the results are compared to those of idealized connection; at the same time, this paper presents a design method that matches economic efficiency, end-fixity, and rotational stiffness.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1261-1262
• /
• 2008

Laser-based crystallization techniques are ideally-suited for forming high-quality crystalline Si films on active-matrix display backplanes, because the highly-localized energy deposition allows for transformation of the as-deposited a-Si without damaging high-temperature-intolerant glass and plastic substrates. However, certain significant and non-trivial attributes must be satisfied for a particular method and implementation to be considered manufacturing-worthy. The crystallization process step must yield a Si microstructure that permits fabrication of thin-film transistors with sufficient uniformity and performance for the intended application and, the realization and implementation of the method must meet specific requirements of viability, robustness and economy in order to be accepted in mass production environments. In recent years, Low Temperature Polycrystalline Silicon (LTPS) has demonstrated its advantages through successful implementation in the application spaces that include highly-integrated active-matrix liquid-crystal displays (AMLCDs), cost competitive AMLCDs, and most recently, active-matrix organic light-emitting diode displays (AMOLEDs). In the mobile display market segment, LTPS continues to gain market share, as consumers demand mobile devices with higher display performance, longer battery life and reduced form factor. LTPS-based mobile displays have clearly demonstrated significant advantages in this regard. While the benefits of LTPS for mobile phones are well recognized, other mobile electronic applications such as portable multimedia players, tablet computers, ultra-mobile personal computers and notebook computers also stand to benefit from the performance and potential cost advantages offered by LTPS. Recently, significant efforts have been made to enable robust and cost-effective LTPS backplane manufacturing for AMOLED displays. The majority of the technical focus has been placed on ensuring the formation of extremely uniform poly-Si films. Although current commercially available AMOLED displays are aimed primarily at mobile applications, it is expected that continued development of the technology will soon lead to larger display sizes. Since LTPS backplanes are essentially required for AMOLED displays, LTPS manufacturing technology must be ready to scale the high degree of uniformity beyond the small and medium displays sizes. It is imperative for the manufacturers of LTPS crystallization equipment to ensure that the widespread adoption of the technology is not hindered by limitations of performance, uniformity or display size. In our presentation, we plan to present the state of the art in light sources and beam delivery systems used in high-volume manufacturing laser crystallization equipment. We will show that excimer-laser-based crystallization technologies are currently meeting the stringent requirements of AMOLED display fabrication, and are well positioned to meet the future demands for manufacturing these displays as well.

• Journal of Technologic Dentistry
• /
• v.29 no.1
• /
• pp.121-131
• /
• 2007

A preparation process's conditions of aqueous sol which contains anatase-type nano titania particles with photocatalyic properties was established by using Yoldas process, so called, DCS(Destabilization of Colloidal Solution) process in this study. And crystal size change and phase transformation of titania particles in aqueous titania sol depending on reaction conditions was investigated by a light scattering method and XRD analysis of frozen dried powders, respectively. This sol with photo catalytic nano titania particles was used to the following hydrophilic hybrid coating film's fabrication and its properties was evaluated. Subsequently, for coating film using the above mentioned aqueous titania sol, non-aqueous titania sol was prepared without any chemical additives and its time stability according to aging time was investigate. By using the above mentioned aqueous titania sol and non-aqueous sol, a complex oxide coating sol for metal and ceramic substrate and a organic-inorganic hybrid coating sol for polymer substrate was prepared and it's hydrophilicity depending on UV irradiation conditions was evaluated. As a conclusions, the following results were obtained. (1)Aqueous titania sol The average particle size of titania in formed aqueous titania sol was distributed between 20$\sim$90nm range depending on reaction conditions. And the crystal phase of titania powders obtained by frozen drying method was changed from amorphous state to anatase and subsequently transformed to rutile crystal phase and it is attributed to concentration gradient in aqueous sol. (2)Non-aqueous titania sol Non-aqueous titania sol was prepared using methanol as a solvent and a little distilled water for hydrolysis and nitric acid as a catalyst were used. The obtained non-aqueous titania sol was stable at room temperature for 20 days. Additionally, non-aqueous titania sol with addition of chealating reagent such as acethylaceton and ethylene glycol prolonged the stability of sol by six months. (3)Complex sol and hybrid sol with super hydrophilicity The above mentioned aqueous titania sol as a main photocataylic component and non-aqueous titania sol as a binder for coating process was used to prepare a complex sol used for metal, ceramic and wood material substrate and also to prepare the organic-inorganic hybrid sol for polymer substrate such as polycarbonate and polyethylene, in which process APMS(3-Aminopropyltrimethoxysilane), GPTS(3-Glycidoxypropyl-trimethoxysilane) as a hydrophilic silane compound and HEMA(2-Hydroxyethyl methacrylate) as a forming network in hybrid coating film were used. The hybrid coating film such as prepared through this process showed a superhydrophilicity below 1$10^{\circ}$ depending on processing conditions and a pencil's hardness over 6 H.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.98-107
• /
• 2007

For high-dimensional pattern recognition, such as face classification, the small number of training samples leads to the Small Sample Size problem when the number of pattern samples is smaller than the number of dimensionality. Recently, various LDA-extensions have been developed, including LDA, PCA+LDA, and Direct-LDA, to address the problem. This paper proposes a method of improving the classification efficiency by increasing the number of (sub)-classes through pre-clustering a training set prior to the execution of Direct-LDA. In LDA (or Direct-LDA), since the number of classes of the training set puts a limit to the dimensionality to be reduced, it is increased to the number of sub-classes that is obtained through clustering so that the classification performance of LDA-extensions can be improved. In other words, the eigen space of the training set consists of the range space and the null space, and the dimensionality of the range space increases as the number of classes increases. Therefore, when constructing the transformation matrix, through minimizing the null space, the loss of discriminatve information resulted from this space can be minimized. Experimental results for the artificial data of X-OR samples as well as the bench mark face databases of AT&T and Yale demonstrate that the classification efficiency of the proposed method could be improved.

• Journal of Aquaculture
• /
• v.8 no.3
• /
• pp.209-220
• /
• 1995

The nuclear matrix was isolated from Misgumus mizolepis liver nuclei by low salt extraction and restriction enzyme treatment. The structure was digested with proteinase K. After centrifugation, matrix attachment regions (MARs) were obtained by RNase treatment and phenol-chloroform extraction. The result leads to the appearance of smeared bands in the range of about 0.3-15 kb. pURY19 vector was constructed by inserting 2.13 kb Eco47 III fragment of the yeast uracil 3 gene into the unique Ssp I site of pUC19 plasmid vector as a selection marker. This vector is unable to be maintained in Sacrharomyces cerevisiae by itself since it cannot replicate as an extrachromosomal element. Using this system, we attempted cloning the ARS (autonomously replicating sequence) from M. mizelepis to develop an efficient expression vector for the transgenic fish. pURY19N_{l-62}$ were constructed by inserting MARs in pURY19 plasmid vector and transformation of E. coli $DH5\alpha$. Replication origins (ARS) of M. mizolepis were isolated, which enabled the vector to replicate autonomously in S. cerevisiae. The cloned DNA fragments were sequenced by Sanger's dideoxy-chain termination method. All clones were AT-rich. $pURY19N_6$, one of the clones, expecially contained ARS consensus sequence, Topoisomerase II consensus, near A-box and T-box.

• Journal of Korea Water Resources Association
• /
• v.41 no.8
• /
• pp.807-823
• /
• 2008

This paper presents a technique for estimating discharge rating curve parameters. In typical practical applications, the original non-linear rating curve is transformed into a simple linear regression model by log-transforming the measurement without examining the effect of log transformation. The model of pseudo-likelihood estimation is developed in this study to deal with heteroscedasticity of residuals in the original non-linear model. The parameters of rating curves and variance functions of errors are simultaneously estimated by the pseudo-likelihood estimation(P-LE) method. Simulated annealing, a global optimization technique, is adapted to minimize the log likelihood of the weighted residuals. The P-LE model was then applied to a hypothetical site where stage-discharge data were generated by incorporating various errors. Results of the P-LE model show reduced error values and narrower confidence intervals than those of the common log-transform linear least squares(LT-LR) model. Also, the limit of water levels for segmentation of discharge rating curve is estimated in the process of P-LE using the Heaviside function. Finally, model performance of the conventional log-transformed linear regression and the developed model, P-LE are computed and compared. After statistical simulation, the developed method is then applied to the real data sets from 5 gauge stations in the Geum River basin. It can be suggested that this developed strategy is applied to real sites to successfully determine weights taking into account error distributions from the observed discharge data.

• The KIPS Transactions:PartB
• /
• v.14B no.4
• /
• pp.249-254
• /
• 2007

A mobile robot with various types of sensors and wireless camera is introduced. We show this mobile robot can detect objects well by combining the results of active sensors and image processing algorithm. First, to detect objects, active sensors such as infrared rays sensors and supersonic waves sensors are employed together and calculates the distance in real time between the object and the robot using sensor's output. The difference between the measured value and calculated value is less than 5%. We focus on how to detect a object region well using image processing algorithm because it gives robots the ability of working for human. This paper suggests effective visual detecting system for moving objects with specified color and motion information. The proposed method includes the object extraction and definition process which uses color transformation and AWUPC computation to decide the existence of moving object. Shape information and signature algorithm are used to segment the objects from background regardless of shape changes. We add weighing values to each results from sensors and the camera. Final results are combined to only one value which represents the probability of an object in the limited distance. Sensor fusion technique improves the detection rate at least 7% higher than the technique using individual sensor.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.2
• /
• pp.138-149
• /
• 2000

Various modeling techniques for ultrasonic wave propagation and scattering problems in finite solid media are presented. Elastodynamic boundary value problems in inhomogeneous multi-layered plate-like structures are set up for modal analysis of guided wave propagation and numerically solved to obtain dispersion curves which show propagation characteristics of guided waves. As a powerful modeling tool to overcome such numerical difficulties in wave scattering problems as the geometrical complexity and mode conversion, the Boundary Element Method(BEM) is introduced and is combined with the normal mode expansion technique to develop the hybrid BEM, an efficient technique for modeling multi mode conversion of guided wave scattering problems. Time dependent wave forms are obtained through the inverse Fourier transformation of the numerical solutions in the frequency domain. 3D BEM program development is underway to model more practical ultrasonic wave signals. Some encouraging numerical results have recently been obtained in comparison with the analytical solutions for wave propagation in a bar subjected to time harmonic longitudinal excitation. It is expected that the presented modeling techniques for elastic wave propagation and scattering can be applied to establish quantitative nondestructive evaluation techniques in various ways.

• The Mathematical Education
• /
• v.47 no.2
• /
• pp.197-219
• /
• 2008

Unlike ordinary situations, deifinitions play a very important role in mathematics education in schools. Mathematical concepts have been mainly acquired by given definitions. However, according to didactical intentions, mathematics education in schools has employed mathematical concepts and definitions with less strict forms than those in pure mathematics. This research mainly discusses definitions used in geometry (promising) course in primary schools to cope with possibilities of creating misconception due to this didactical transformation. After analyzing problems with potential misconceptions, a survey was conducted $\underline{with}$ 80 primary school teachers in Jeju to investigate their recognitions in meaning of mathematical concepts in geometry and attitudes toward teaching. Most of the respondents answered they taught their students while they knew well about mathematical definitions in geometry but the respondents sometimes confused mathematical concepts of polygons and circles. Also, they were aware of problems in current mathematics textbooks which have explained figures in small topics (classes). Here, several suggestions are proposed as follows from analyzing teachers' recognitions and researches in mathematical viewpoints of definitions (promising) in geometric figures which have been adopted by current mathematics textbooks in primary schools from the seventh educational curriculum. First, when primary school students in their detailed operational stage studying figures, they tend to experience $\underline{a}$ collision between concept images acquired from activities to find out promising and concept images formed through promising. Therefore, a teaching method is required to lessen possibility of misconceptions. That is, there should be a communication method between defining conceptual definitions and Images. Second, we need to consider how geometric figures and their elements in primary school textbooks are connected with fundamental terminologies laying the foundation for geometrical definitions and more logical approaches should be adopted. Third, the consistency with studying geometric figures should be considered. Fourth, sorting activities about problems in coined words related to figures and way and time of their introductions should be emphasized. In primary schools mathematics curriculum, geometry has played a crucial role in increasing mathematical ways of thoughts. Hence, being introduced by parts from viewpoints of relational understanding should be emphasized more in textbooks and teachers should teach students after restructuring this. Mathematics teachers should help their students not only learn conceptual definitions of geometric figures in their courses well but also advance to rigid mathematical definitions. Therefore, that's why mathematics teachers should know meanings of concepts clearly and accurately.

• Korean Journal of Veterinary Research
• /
• v.16 no.2
• /
• pp.151-158
• /
• 1976

The tuberculin test have been widely utilized to diagnose tuberculosis of the dairy cattle. It was reported that approximately 70% of the dairy cattle with positive tuberculin reaction in Korea had been non-pathogenic lesion. So the studies on the specific method to diagnose tuberculosis of them is really need in Korea. Therefore this study investigated upon the diagnostic method for cattle tuberculosis in the aspect of cellular-immunology. The results obtained in this investigation are summarized as follows: 1. All the tuberculin tests to the swine inoculated with BCG.(B group), Mycobacterium avium (A group) and Mycobacterium smegmatis (S group), respectively, were represented high positive reaction and were no differences in the species of inoculated bacteria. 2. In the migration inhibition test using Iymphocyte in circulating blood of the swine inoculated with three species of acid-fast bacteria respectively, the test to A group was represented slight positive for migration in the presence of $15{\mu}g/ml$-PPD and the other reaction were clear and total positive for migration inhibition in the presence of $25{\mu}g/ml$-PPD or more, and the test to B group was the same results as to A group approximately. The test to S group was represented slight positive for migration inhibition in the presence of $15{\mu}g/ml$-PPD, but the results were the same in the presence of $25{\mu}g/ml$-PPD and $35{\mu}g/ml$-PPD. These results showed that there were remarkable differences between group A, B and group S in the presence of $25{\mu}g/ml$-PPD and $35{\mu}g/ml$-PPD. 3. The transformation rates of lymphocyte in PPD treated tissue culture had no significance without any relation between PPD treatment and non-treatment but A group and B group showed significance. And A group and B group showed high significance in comparison with N group and S group in the LSD examination. 4. The infection rated in lymphocyte of BCG inoculated after 3 days tissue culturing were represented those of high infection but its cellular degeneration rates almost did not change. The infection rates in bacilli in N group and S group were low but after 3 days inoculation it shewed higher cellular degeneration.