• Structural Engineering and Mechanics
• /
• v.81 no.2
• /
• pp.117-129
• /
• 2022

This research evaluated the different types of deck to pier connections effects (one or two elastomeric bearing lines and rigid) on a concrete bridges. Three-dimensional bridge models behavior with different deck to pier connections and different distances of two bearing lines were studied under the service load. Also, the detailed connection system with two elastomeric bearing lines was modeled to evaluate the effect of changing distance between two-lines. Results indicated that the proper location of elastomeric bearings has a major impact on the transferring forces to the substructure. Double elastomeric bearing lines have a behavior between one line and rigid connections. Transferring bending moment to the substructure in two-lines is more than the corresponding value of the one line. Moreover, an increase in the distance of two-lines lead to a significant increase in the rotational stiffness of the connection, and an analytical solution was investigated for their relation. In fact, the semi-rigidity effect of this connection and its change due to the distance of bearings should be considered in the design process.

• Proceedings of the KOR-KST Conference
• /
• 1999.10a
• /
• pp.9-14
• /
• 1999

• Journal of Society of Preventive Korean Medicine
• /
• v.19 no.3
• /
• pp.103-113
• /
• 2015

Objective : Five most generally adopting basic oriental prescriptions (yookmijihwangtang, ojeoksan, sipjeondaebotang, samultang, bojoongikgitang) samples were collected from 10 oriental hospitals nationwide and the transferring ratio to aqueous phase (TRAP) were calculated. Method : The samples are grounded evenly and the decocted at $120^{\circ}C$ for 12 min on hot plate and then filtered. The concentrations of As, Cd, Co, Cr and Pb in before and after decoction were measure by ICP/MS and the TRAPs were calculated. Results : The concentrations of As, Cr and Pb in the ground samples before decoction were all below criteria level, and TRAP values were also very low (<10%). For Cd, although some ground samples before decoction showed relatively high concentration level compare to the criteria level, because of their low TRAP (~3%), the actual concentrations in the decoction were quite low compare the criteria level. The Co's concentrations in the ground samples before decoction were all relatively low level. However, the TRAP of Co was astonishingly high value of around 40% average. Conclusion : The toxic heavy metal concentrations in the decoction were very low compare to the criteria level. The TRAPs are less than <10% except Co. The toxic heavy metals in the prescriptions are mainly remained in the residue and the only very small fraction may transferred to the decoctions. Therefore the toxicity of the oriental herbal medicine about the toxic heavy metal may be overstressed. The Co's TRAP turned out to be quite high value (40% average). Since the criteria level wes not established yet, the safety of decoctions according to Co was not fully confirmed.

• Journal of the Korean Institute of Gas
• /
• v.5 no.2 s.14
• /
• pp.14-21
• /
• 2001

In order to investigate the damage mechanism of the coupler transferring LPG, microstructural observation and chemical analysis of the couplers operated for the long time in the LPG stations and virgin 6/4 forged-brass corrosion-tested were conducted. Their microstructure was consisted of two phases that bright $\beta$ precipitates were irregularly dispersed in $\alpha$ matrix. The chemical compositions of oxide layer on the surface of the used coupler were composed of S, C, O, Al, Si, etc. as well as Cu and Zn. In environmental corrosion tests of both $10\%$ HCl and Mattsson solutions, no apparent deviations in mechanical impact strength of forged-brass was observed. While, in U-bend stress corrosion cracking specimen, some microcracks were observed.

• Journal of Korean Society of Transportation
• /
• v.24 no.6 s.92
• /
• pp.75-85
• /
• 2006

Recently. large number of countires have been focused on the construction of container seaport and hub airport to enrole as the center of logistics. In particular, the East Asian nations have been enhanced their airports' facilities in order to accommodate for demand of global market environment. In Korea, Incheon International Airport (ICN) was opened in 2001 to take leading role as the Northeast Asian main hub airport. The purpose of this research is to analyze the transferring connectivity at ICN. To analyze its connectivity, this research has been applies two methodologies ; wane structure and minimum or maximun connection time analysis It has analyzed the temporal configuration as the frequency and quality of indirect connections offered by an airline by adopting a wave-system structure in the airline flight schedule. As an empirical analysis, it also calculated the minimum and maximum connection time adopting Korean Air's flight information.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.5
• /
• pp.717-724
• /
• 2012

Color is one of the perch properties. This study was conducted to investigate the general behaviors and perching behaviors in laying hens under different group size (stocking density), and to understand the perch color (black, white or brown) preference of hens during the night. A total of 390 Hyline Brown laying hens was used, and randomly allocated to three treatments: individual group (G1), group of four hens (G4), and group of eight hens (G8), respectively. There were 30 replicates in each group. The hens in G1, G4 and G8 groups were put into the test cages in which three colored perches were simultaneously provided and allowed for four days of habituation in the new cages. Hens behaviors were recorded using cameras with infrared light sources for the following periods: 8:00 to 10:00; 14:00 to 16:00; 19:00 to 21:00; 23:30 to 0:30 on the fifth day after transferring the birds into the test cages. The behaviors of hens in every time period were collected and analyzed, and hens positions on the test perches during mid-night were recorded. The results showed that, group size (stocking density) had significant effect on most of the general behaviors of laying hens except exploring behavior. There were great differences in most of the general behaviors during different time periods. In the preference test of perch color during night, the hens showed no clear preference for white, black or brown perches. For perching behaviors, perching time and frequency of transferring from one perch to another was higher on black perches than on white or brown perches in individual groups. In G4 groups, the hens spent more time on white perches during daytime and more frequent transferring during night compared with black or brown perches. The frequency of jumping upon and down from white perches was higher in G8 groups. It can be concluded that although the group sizes in the cage significantly affected most of the general behaviors, we found that no preference of perch color was shown by the caged laying hens in the different group sizes tested in this study.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.1
• /
• pp.83-89
• /
• 1999

For the object-oriented development methods authorized by OMG a number of official methodologies such as Booch, Coad/Yourdon methods are used in the development of the object-oriented soft ware and each methodology represents its process of analysis and design using different symbols. Between those notation methodologies there exist some differences as a matter of development, information for transfer, accordingly they act on the transfer of the information in the object-oriented development as obstacle and give rise to they natural outcome of error. The aim of this study is in the presentation of ideas that decrease the probability of errors by means of verify8ing the transferring ability of information which the existing diagrammatic notation methodologies have had on the basis of cognitive science, minimizing the cognitive load from the object-oriented development through enhancing symbols in each obstacles to transferring information and removing them.

• Korea Journal of Hospital Management
• /
• v.1 no.1
• /
• pp.37-55
• /
• 1996

This study attempts to analyze the factors affecting the intention of transferring to another hospitals among radiology technologists. 344 cases were reviewed in 5 university hospitals and 1 general hospital. Self-administered questionaire were given to study the socioeconomic characteristics, working conditions, job satisfaction level, and the reasons for transfer among the technologists. The major findings were as follows : 1. Job position and hospital characteristics had a statistically significant relationship with the intention of transferring to another hospital. 2. Those who were not satisfied with their salaries and promotional opportunity showed a higher tendency towards to transfer. 3. Those who were less satisfied with the opportunity for developing the personal ability and had the negative attitude on their job showed a higher tendency to transfer. 4. Those who did not sustain good relationship with their superiors and co-workers scored high on the tendency to transfer. 5. In the result of mutiple regression, recognition of radiation hazard, job satisfaction, satisfaction with salary levels, job attitude were significantly related to transfer. The above indicate that besides economic incentives, job satisfaction and organizational culture to promote their ability and form a good relationship with organization members were very important to decrease the intention of transfer. Since these results represent only 6 hospitals from a limited area, more hospitals nationwide, especially small and medium-sized institutions where there is a high turnover rate of employment, need to be examined in order to investigate the various factors that affect the intention of transferring.

• Archives of design research
• /
• v.13 no.1
• /
• pp.139-148
• /
• 2000

Development of the digital technology made possible the Integrated media that is combined computer with information network technology. Integrated media is the data transferring method through the multimedia, and has been developed by the similar form with the human's information transferring system. For that reason, interface has been developed as the important theme, Human Computer Interaction, according to the formal development. Using interface is not activated yet for the lack of connection with various divisions and the system of the product development although interfaces formatic development is re-arranged and re-established in design. This is the try to construct new model of the interface by re-arrange of the factors for the information transferring form development on the ground of the mp3 service vending machine development. Interface is divided into logical I formatic and hardware I software for he systematic classification and also arranged so that anybody can understand. Consequently, presenting of the new integrated interface paradigm can make possible to suggest the fundamental framework that is the new direction of the design re-arranged by the integrated media.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.2
• /
• pp.161-171
• /
• 2006

The objectives of this study were to ergonomically evaluate varying tasks performed in a general hospital and to propose their improving measures based on the evaluation results. The tasks found in the hospital were largely classified into two groups of manual materials handling and awkward posture related tasks. Ergonomic tools of NLE, 3-D SSPP and RULA were used for evaluating workload of the tasks. The major findings are: 1) L5/S1 compressive force of patient transferring by one person exceeded the maximum permissible limit(6,400N) by NIOSH. The L5/S1 compressive forces for most of the patient transferring tasks by 2-4 persons were larger than the action limit (3,400N), and the tasks by five persons were analyzed to be safe in the view of L5/S1 compressive force; 2) patient repositioning tasks by 2-3 persons were hazardous on the basis of L5/S1 compressive force, while most of the tasks by 4-5 persons were safe; 3) many tasks performed in wards were found to be stressful, most of which resulted from improper heights of their working tables or working points. Of varying tasks in general hospitals, patient transferring was the most stressful. Based on the results of this study and high prevalence of musculoskeletal disorders from other studies, it is recommended that the ergonomics program be introduced and enforced for doing improving activities systematically