• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1607-1614
• /
• 2011

As the connection between spread footing and pile is very important structural connection, it acts as the inter-loading medium to transfer the rail loads applied by superstructure to ground through the body pile of foundation. The experimental study is the method how to reinforce the pile cap between steel pile and footing utilizing perfobond plate with protruding keys. It were experimented on the compression punching tests and bending moment tests against the vertical loading and horizontal loadings acting on head of steel tube pipe. As a result, the tension capacity of the perfobond plate exhibited the superior performance due to the interlocking or dowel effects by the sheared keys of perfobond plate, and there were showing the sufficient strength and ductile capacity against the bending moment of horizontal loading tests. Therefore, it is judged that "the embedded method of perfobond plate in pile cap and footing" which is utilizing the shear connection of perfobond plate with protruding keys has a sufficient structural stability enough to be replaced with the current specification of reinforced method of pile cap with vertically deformed rebar against the vertical compression loads and bending moments that are able to occur in the combination structure of steel pile and the footing foundation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.4
• /
• pp.405-410
• /
• 2006

This paper presents the design of a USB home controller and a home control system that specially is focused on controlling home appliances as a part of home network systems, the implementation of the USB device access class in an OSGi service platform and a home security system as an application. Designed USB home controllers are able to control various home appliances. They can be used not only to control big home appliances like a boiler but also to control small home appliances like a toaster because they are low-cost solutions. The USB home controller supports real time control using the interrupt transfer of the USB specification. And It is easy to use by homemakers who have no technical knowledge of the system because they just plug and unplug it in a home server then it automatically joins and leaves a home control system. This technique is based on hot-plug and the USB Device Access class in an OSGi Service Platform. The USB Device Access class supports the coordination of automatic detection and attachment of the USB home controller on an OSGi Service Platform, and it downloads and installs device drivers on demand. For an application, we implemented and tested a home security system using two USB home controllers and a CDMA module.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.1
• /
• pp.154-162
• /
• 2010

A simulation technique is very useful method to analyze the performance on various engineering area. To automate port systems, we have need of simulation to analyze an effect of assigning and operating devices. Thus we propose simulation methodology to be applied to an analysis, evaluation, planning for port automation. To do this, we have adopted the discrete event system specification based system entity structure / model base framework for modeling and simulation environment. We have performed modeling and simulation on entities of port systems such as container crane, yard tractor, transfer crane, etc. The proposed methodology has an advantage being able to effectively simulate on alternatives of composition and operation strategy for port systems. Some case studies will show the validity of proposed simulation methodology.

• Journal of Korea Multimedia Society
• /
• v.19 no.12
• /
• pp.2014-2023
• /
• 2016

Web presence is one of the key issues for extensive deployment of Internet-of-Things (IoT). An obstacle to overcome for Web presence is relatively low computing power of IoT devices. In this paper, we present implementation of an IoT platform based on Constrained Application Protocol (CoAP) which is a web transfer protocol proposed by Internet Engineering Task Force (IETF) for the low performance IoT devices such as Wireless Sensor Network (WSN) nodes and micro-controllers. To qualify the performance of CoAP-based IoT system for such an application as smart grid, we designed a test platform consisting of Raspberry Pi2, Kmote WSN node and a desktop PC. Using open source softwares, CoAP was implemented on top of the platform. Leveraging the GET command defined at CoAP specification, performance of the system was measured in terms of round-trip time (RTT) from web application to the Kmote sensor node. To investigate abnormal cases among the test results, hop-by-hop delays were measured to analyze resulting data. The average response time of CoAP-based communication except the abnormal data was reduced by 23% smaller than the previous research result.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.89-99
• /
• 1999

The automatic design of shell & tube type oil cooler can be used in real industrial environments. Since the automatic design system is intended to be used in small companies, it is designed to be operated well under environments of CAD package in the personal computer. It has adopted GUI in design system, and has employed DCl language. Design parameters to be considered in the design stage of shell and tube type oil cooler are type of oil cooler, outer diameter, thickness, length of tube, tube arrangement, tube pitch, flow rate, inlet and outlet temperature, physical properties, premissive pressure loss on both sides, type of baffle plate, baffle plate cutting ratio, clearance between baffle plate outer diameter and shell inner diameter and clearance between baffle plate holes. As a result, the automatic design system of shell & tube type oil cooler is constructed by the environment of CAD software using LISP. We have built database of design data for various kinds of shell & tube type oil coolers. The automatic design system have been assessed and compared with existing specification of design. Good agreement with Handbook of heat exchanger and design dta of real industrial environments has been found.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.11
• /
• pp.1069-1076
• /
• 2007

This paper presents the road simulator control technology for reproducing the road input signal to implement the real road data. The simulator consists of the hydraulic pump, servo valve, hydraulic actuator and its control equipment. The QFT(Quantitative Feedback Theory) is utilized to control the simulator effectively. The control system illustrates a tracking performance of the closed-loop controller with low order transfer function G(s) and pre-filter F(s) for a parametric uncertain model. A force controller is designed to communicate the control signal between simulator and digital controller. Tracking specification is satisfied with upper and lower bound tolerances on the steep response of the system to the reference signal. The efficacy of the QFT force controller is verified through the numerical simulation, in which combined dynamics and actuation of the hydraulic servo system are tested. The simulation results show that the proposed control technique works well under uncertain hydraulic plant system. The conventional software (Labview) is used to make up for the real controller in the real-time basis, and the experimental works show that the proposed algorithm works well for a single road simulator.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.792-794
• /
• 2007

Since passive information users in mass media era became active information producers in this Internet era, an enormous amount of education contents has been created. As people use different production and reproduction tools even for the same content, however, user-created contents (UCC) do not have compatibility among them, which leads to other problems too. In order to solve these problems, this study proposes "a platform in UCC production environment based on standard specification, which will enhance interoperability among contents." We expect that this platform will help design Contents Publication and Management System (CPMS), which minimizes jobs required to be done repetitively for contents up-loading or transfer and thus enables easy contents sharing and management.

• Journal of Technology Innovation
• /
• v.13 no.2
• /
• pp.179-205
• /
• 2005

This study reveals that the user industry has a limited role in being a source of technological capability in the case of the machine tool industry in Korea where the user industry is relatively more advanced than other capital goods industries. This study examines the sources of technological capability in terms of migration of workforces and flow of product development knowledge. Although the capital goods sector is generally regarded as being the sector where user-producer interaction is important, the user industry is not the seed-bed of technological capability for machine development. Users and producers interact in terms of expressing 'needs', mainly in the form of specifications. As a result of receiving unique specifications from users, the producer learns to react by making specific customised special purpose machines. The user's specification could include information o the imported machine originally used. When confronted with technical problems in developing a new machine, the producer accesses foreign sources of knowledge. This study's finding reveals that users of special purpose machines have a significantly clearer role in providing specifications than do users of general purpose machine tools. Most intensive interactive learning between users and producers in the production process is found in special purpose machine tools. From the empirical findings, policy implications are discussed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.2
• /
• pp.219-226
• /
• 2013

Against the global eavesdropping in wireless sensor networks, tremendous amount of dummy packets for faking are likely to be continuously generated in order to keep the location privacy of the communication source and destination. In our approach only certain disk-shaped zones of encompassing sources and destination are allowed to issue dummy packets during the data transfer so that the amount of generated packets is reduced while the location privacy of the source and destination remains secret. To this end we design a routing protocol and propose a detailed formal specification of it, and verify major characteristics.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1296-1299
• /
• 2002

We implemented a CD signal processor operated on a CAV 48-speed CD-ROM drive into a VLSI. The CD signal processor is a mixed mode monolithic IC including servo-processor, data recovery, data-processor, and I-bit DAC. For servo signal processing, we included a DSP core, while, for CAV mode playback, we adopted a PLL with a wide recovery range. Data processor (DP) was designed to meet the yellow book specification.［2］So, the DP block consists of EFM demodulator, C1/C2 ECC block, audio processor and a block transferring data to an ATAPI chip. A modified Euclid's algorithm was used as a key equation solver for the ECC block To achieve the high-speed decoding, the RS decoder is operated by a pipelined method. Audio playability is increased by playing a CD-DA disc at the speed of 12X or 16X. For this, subcode sync and data are processed in the same way as main data processing. The overall performance of IC is verified by measuring a transfer rate from the innermost area of disc to the outermost area. At 48-speed, the operating frequency is 210 ㎒, and this chip is fabricated by 0.35 um STD90 cell library of Samsung Electronics.