• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.655-659
• /
• 2007

The purpose of this paper is to analyze cost-effectiveness of a train simulator. The cost-effectiveness of training program is assessed by multiplying transfer effectiveness ratio (TER) by training cost ratio (TCR). If their product is less than one, the program is not cost effective. Even if a program is not cost effective, however, safety considerations may be important to consider. Findings indicated that each type of train simulators might be used with each type of training programs appropriately for improving cost-effectiveness of a train simulator.

• Journal of computational fluids engineering
• /
• v.21 no.1
• /
• pp.43-49
• /
• 2016

Thermal cracking is commonly modeled as plug flow reaction, neglecting the lateral gradients present. In this paper, 2-dimensional computational fluid dynamics including turbulence model and molecular reaction scheme are carried out. This simulation is solved by means of coupled implicit scheme for stable convergence of solution. The reactor is modeled as an isothermal tube, whose length is 1.2 m and radius is 0.01 m, respectively. At first, The radial profile of velocity and temperature at each point are predicted in its condition. Then the bulk temperature and conversion curve along the axial direction are compared with other published data to identify the reason why discussed variations of properties are important to product yield. Finally, defining a new non-dimensional number, Effect of interaction with turbulence, heat transfer and chemical reaction are discussed for design of thermal cracking furnace.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.1
• /
• pp.34-39
• /
• 2011

Temperature control of a rubber injection mold is important for the dimensional accuracy of product. The main objective of this paper is to optimize the arrangement of heaters by FEM and optimal design method. Firstly, 3-dimensional transient heat transfer analysis was carried out for a square specimen mold. Results of FE analysis are a good agreement with the experimental results, showing about 1.22~7.22% error in temperature distribution. Secondly, we suggested the optimal method about an arrangement of heaters of rubber injection mold by using the optimal design technique. Distances between heater's center and the contact surface of mold, distances between heater's center and symmetric surface were considered as design variables. And the variances between the temperatures of cavity surfaces and their average temperature were used as the objective functions. Applying the optimal solution, the temperature variation was improved about 52.9~88.1 % compared to the existing mold. As a result of sensitivity analysis for design variables, design variables parallel to the direction of the split plane in mold affect the largest on the surface temperature variation in mold cavity.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.72-80
• /
• 1992

Group 6 $M(CO)_4$(2, 2'-bipyridine)[M=Cr, Mo, W] was synthesized by substituting CO ligand of $M(CO)_6$ with strong electron donating ligand, 2, 2'-blpyridine, in the presence of phase transfer catalyst. The effective of catalyst and solvent on the product yield were discussed according to concentration and kinds of catalyst, kinds of center cation and anion, type of alkyl and aryl groups attached to the center cation, and different chain length.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.1
• /
• pp.47-51
• /
• 2005

The bioelectrochemical reduction of nitrate in the presence of various mediators including methyl viologen and azure A was studied using a 3-electrode voltammetric system. The catalytic potential for the reduction of the mediators was observed in the reactor, which for methyl viologen and azure A were -0.74 V and -0.32 V, respectively, with respect to the potential of Ag/AgCl reference electrode. This potential was then applied to a working electrode to reduce each mediator for enzymatic nitrate reduction. Nitrite, the product of the reaction, was measured to observe the enzymatic nitrate reduction in the reaction media. Methyl viologen was observed as the most efficient mediator among those tested, while azure A showed the highest electron efficiency at the intrinsic reduction potential when the mediated enzyme reactions were carried out with the freely solubilized mediator. The electron transfer of azure A with respect to time was due to the adhesion of azure A to the hydrophilic surface during the reduction. In addition, the use of the adsorbed mediator on conductive activated carbon was proposed to inhibit the change in the electron transfer rate during the reaction by maintaining a constant mediator concentration and active surface area of the electrode. Azure A showed better than nitrite formation than methyl viologen when used with activated carbon.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.3
• /
• pp.371-375
• /
• 1997

The content of genistein and daidzein which were known to be major antioxidative compounds in soybeans were detected by $C_{18}$ reverse phase HPLC. Most of isoflavones in soybeans were detected in the methanol extract but much less amount of isoflavones in the water extract. Among the four different kind of soybeans, the isoflavone content was highest in brown soybean, followed by yellow, small black and black soybean, in the order. These isoflavones were known to be soluble in hot water, which means transfer of isoflavone content was highest in brown soybean, followed by yellow, small black and black soybean, in the order. These isoflavones were known to be soluble in hot water, which means transfer of isoflavones in soy curd into whey during soy curd processing. To identify the change of isoflavone content during processing of soybean curd, soybean curd were made from yellow, brown and black soybean and isoflavone content were determined in each soybean curd, curd residue and whey. Most of soflavones were remained in the whey, it means most of useful antioxidative compounds were wasted. Thus, it is necessary to develop new technology to collect these isoflavones lost during soybean curd processing.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.813-822
• /
• 2012

Abnormal operating sounds radiated from a moving transfer robot in LCD (liquid crystal display) product lines have been used for the fault detection line of a robot instead of other source signals such as vibrations, acoustic emissions, and electrical signals. Its advantage as a source signal makes it possible to monitor the status of multiple faults by using only a microphone, despite a relatively low sensitivity. The wavelet packet transform for feature extraction and the artificial neural network for fault classification are employed. It can be observed that the abnormal operating sound is sufficiently useful as a source signal for the fault diagnosis of mechanical components as well as other source signals.

• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.4
• /
• pp.181-189
• /
• 2012

The demand on quantitative measurement of the heat flux is motivated in making higher-quality steel product through a water quenching process of plate mill. To improve a spatial degree of heat flux measurement, the multi-point heat flux measurement was carried out by a unique experimental technique that has a combination of the existing single-point heat flux gauge. The corresponding heat flux can be easily determined by Fourier's law in a conventional way. The multi-point heat flux gauge developed in this study can be applicable to measure the surface heat flux, the surface heat transfer coefficient during a water quenching applications of steelmaking process. The results exhibit different heat transfer regimes; such as single-phase forced convection, nucleate boiling, and film boiling, that are occurred in close proximity on the multi-point heat flux gauge quenched by water impinging jet.

• The Research Journal of the Costume Culture
• /
• v.21 no.5
• /
• pp.684-698
• /
• 2013

Interest and desire for analogue emotion increased with the dazzling development of digital technology. Especially, as analogue emotion got grafted in the design field, analysis through various expression media is being done. This study seeks to propose design of t-shirt using unique advantage of Hangeul calligraphy that can satisfy the modern flow and pattern design's various expressions. Calligraphy is being used in various fields such as advert, package, logo, movie poster, signboard, graphic design, calligraphy and abstract painting. Formative yet effective in readability and conveying meaning as it's expressed in letters, calligraphy is a field of attention with its contribution in extending the new design area. As a method of the study, altogether 8 pieces of t-shirts were proposed through related preceding research, literary research, co-work with calligraphy author, computer graphic program, and heat transfer. As such, the t-shirt designs which were created by suggesting various design and using traditional materials like calligraphy, can be used as novel and sensual factor, where one can get a glimpse at the potential of development as traditional fashion product.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.4
• /
• pp.343-349
• /
• 2007

This cryogenic miniature globe valve is used to transfer the liquified natural gas which temperature is $-169^{\circ}C$, supplied pressure is 30bar(3.0MPa). In the present work the temperature distribution and thermal deformation is calculated numerical the FE method is useful to predict the thermal matter of cryogenic miniature globe valve. For this reason, to optimum design of the cryogenic miniature globe valve the analysis of the parameter about bonnet has been studied. It's used 3-D modeling to analyze cryogenic globe valve, which is 1/2". Numerical study used 3-D modeling makes a decision of efficient process of product before producing in the factory. A commercial software(ANSYS 10.0) is used in the structural analysis for cryogenic globe valve.