• Journal of Pharmaceutical Investigation
• /
• 제28권3호
• /
• pp.141-149
• /
• 1998

In order to reduce systemic side effects following administration, flurbiprofen was formulated as O/W microemulsion consisting of the surfactant, oil phase and aqueous phase. Particle size distribution, apparent viscosity, solubility and skin permeation of flurbiprofen in various vehicles and microemulsion were evaluated. The domain of O/W microemulsion s phase diagram had difference between oil types and the area of O/W microemulsion was wide distributed by adding to PG and cosurfactant than that of water alone. As increasing 10, 15 and 20% of Brij 97 content and 1, 2.5, 5% of oil content, the solubility of flurbiprofen in O/W microemulsions and various vehicles was $400{\sim}1,000$ and $10{\sim}500$ times higher than that of control. Also, apparent viscosity of soybean oil microemulsions was higher than that of IPM microemulsions and that of vehicle were increased as increasing vehicle content. Since skin permeation of flurbiprofen decreased as increasing viscosity, in each vehicle, it was not affected 2% ${\beta}-CD$ and decreased as increasing PG content and to 2, 5 and 10% of $HP-{\beta}-CD$. In O/W microemulsion, 5% soybean oil. 20% Brij 97 and 75% water(A-1) with high viscosity showed low skin penetration.

• 한국응용과학기술학회지
• /
• 제17권1호
• /
• pp.43-48
• /
• 2000

Drug delivery system(DDS) applied to various fields, such as medicine, cosmetics, agriculture and necessities of life. Among these application fields, DDS is often used as the method of drug dosage into the epidermic skin. We investigated characters of transdermal therapeutic system(TTS) and the skin permeability of that with applying DDS. Chitosan was selected as material of TTS. We investigated the permeation of chitosan ointment containing drug in rat skin using horizontal membrane cell model. Permeation properties of materials were investigated for water-soluble drug such as riboflavin in vitro. We used glycerin, PEG 600 and oleic acid as enhancers. Since dermis has more content water(hydration) than the stratum corneum, skin permeation rate at steady state was highly influenced when glycerin was used in water-soluble drug. The permeation rate of content enhancer and drug was found to be faster than that of content water-soluble drug only. These results showed that skin permeation rate of drug across the composite was manly dependent on the property of ointment base and drug. Proper selection of the polymeric materials which resemble and enhance properties of the delivering drug was found to be important in controlling the skin permeation rate.

• 약학회지
• /
• 제44권6호
• /
• pp.595-600
• /
• 2000

Transdermal delivery of ketorolac tromethamine, a potent non-narcotic analgesic, through human cadaver skin was investigated in vitro. A mixture of ethanol/water (40/60) containing 0, 1, 3, 5, and 8 (w/v)% L-menthol were used as a vehicle and penetration enhancer respectively. The permeation of ketorolac through human cadaver skin from saturated drug solution was evaluated at $37^{\circ}C$ with modified Franz diffusion cell. The in vitro skin flux and lag time were $1.23\;{\pm}\;0.11\;{\mu}g/cm^2{\cdot}hr$ and $5.56\;{\pm}\;0.34\;hr$, respectively. The cumulative amount of penetrated ketorolac containing L-menthol in ethanol/water (40/60) binary system was increased by the following order; 3%, 5%, 8%, 1%, 0%, and the lag time was decresed by the following order; 3%, 5%, 8%, 0%, 1%. The results suggested that a potential use of 3% L-methol is an effective penetration enhancer of ketorolac tromethamine through the human cadaver skin.

• Biomolecules & Therapeutics
• /
• 제9권4호
• /
• pp.298-306
• /
• 2001

To develop a novel transdermal delivery system of loxoprofen (LP), a potent antiinflammatory and analgesic agent, the effects of vehicle composition and drug loading dose on the skin permeation property were investigated. And in vivo skin absorption property studied by analysing the $C_{max}$ and AUC was investigated after applying the developed plaster systems on rabbit back skin. Addition of isopropyl myristate (IPM) and IPM-diethylene glycol monoethyl ether (DGME) cosolvent in the plaster showed higher permeation rates than those from propylene glycol laurate-DGME cosolvent systems. As the concentration of LP in the plaster increased from 0.56 mg/$\textrm{cm}^2$ to 1.19 mg/$\textrm{cm}^2$, the drug release and skin permeation rates increased linearly. At loading dose of 1.19 mg/$\textrm{cm}^2$, the flux reached 35.6 $\mu$g/$\textrm{cm}^2$/hr. New LP plasters showed a good adhesive property onto skin, and showed no crystal formation. The AU $C_{0-24hr}$ and $C_{max}$ after dermal application of LP plaster (60 mg/70 $\textrm{cm}^2$) were found to be 6951$\pm$230 ng.hr/ml and 400$\pm$44 ng/ml, respectively. And the plasma concentration maintained above 300 ng/ml up to 24 hr period. In the carrageenan-induced rat paw edema test, LP plaster showed similar inhibition rate with marketed ketoprofen (Ketoto $p^{R}$) plaster.aster.r.

• Journal of Pharmaceutical Investigation
• /
• 제38권6호
• /
• pp.405-412
• /
• 2008

Six ester analogues of Ketorolac were synthesized as potential enhancer prodrugs for transdermal delivery. Solubility of these esters was determined in 10% propylene glycol (PG)/isotonic phosphate buffer (IPB) at room temperature while lipophilicity was obtained as partition coefficients (log P) and capacity factors (k') using HPLC. Stability of the prodrugs in skin extract and in plasma was investigated at $37^{\circ}C$. The lipophilicity of the potential prodrugs increased in proportion to their alkyl chain length. Good linear relationship between partition coefficients (log P) and capacity factors (log k') was observed ($R^2=0.9961$). All of the analogues were fairly stable but slowly degraded in IPB over a 12 hour period. However, their stability in skin extract and in plasma varied with most compounds gradually decomposing over a 12 hour period. Although unsaturation of the alkyl ester chain did not alter the over all lipophilicity of the compound, the half-life was significantly affected. In plasma, degradation of the esters was slower than in the skin extract, which is a desirable trait for enhancer-prodrugs. However, the overall hydrolysis in the skin extract needs to be facilitated for the development of an effective enhancer prodrug. The analogue with the shortest half life in the skin extract was the unsaturated C-12 analogue of 0.96 hr.

• Journal of Pharmaceutical Investigation
• /
• 제27권2호
• /
• pp.139-143
• /
• 1997

Epidermal growth factor (EGF) is a mitogen which activate the proliferation of basal cells in skin, which implicate the wound healing in severe skin damage such as burn. To carry out the preclinical test for the pharmacological action of EGF, EGF in transdermal delivery system must be stable. Since EGF is a protein susceptible to proteolysis and unstable in aqueous solution, in vitro stabilization of EGF is prerequisite for the formulation. In this study, effect of additives on the stability of EGF is investigated in vitro. The stability of EGF in aqueous solution was enhanced with the various water-soluble polysaccharides such as HPMC, sorbitol, mannitol and dextrin. EGF was successfully extracted from the ointment with 5% HPMC solution, and EGF in aqueous solution and ointment was also successfully stabilized with 5% HPMC. The ointments prepared with different amount of EGF were applied on the damaged dorsal skin of rats for the determination of optimal concentration of EGF. The ointment with EGF $(10\;{\mu}g/g)$ showed good wound healing action on the damaged skin of rats.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1532-1533
• /
• 2007

Hollow형 미세바늘 어레이는 주사기와 패치의 장점을 결합하여 여러 종류의 약물을 통증 없이, 전달할 수 있게 한다. 본 논문에서는 건식 식각 방법과 습식 식각 방법을 이용하여 hollow형 실리콘 미세바늘 어레이를 제작하는 제작 공정과 그 결과를 제시하였다. 미세바늘 어레이의 형태는 실리콘 웨이퍼의 앞면에서 세 번의 식각 공정을 이용해 제작되었는데, 첫 번째 건식 식각 공정으로 피부에의 침투를 원활히 하기 위해 바늘 끝을 형성하고, 두 번째 건식 식각 공정으로 바늘의 길이를 조절하며, 마지막 HNA solution을 이용한 습식 식각 공정으로 바늘을 더 가늘게 만들면서 끝을 더 날카롭게 식각한다. 바늘을 통해 약물전달이 가능하도록 웨이퍼의 뒷면으로부터 건식 식각 공정을 이용해 약물 주입통로를 형성하였다. 제작된 Hollow형 실리콘 미세바늘 어레이는 $170\;{\mu}m$의 너비와 $230\;{\mu}m$의 길이, 직경 $40\;{\mu}m$의 약물 주입통로를 가지고 있으며, $1\;cm^2$의 시편 위에 $1000\;{\mu}m$의 피치로 $9{\times}9$ 개의 바늘을 형성하였다.

• Translational and Clinical Pharmacology
• /
• 제25권1호
• /
• pp.15-20
• /
• 2017

This study was performed to evaluate the use of vibrating microneedles for the transdermal delivery of vitamin C. The microneedles were designed to vibrate at three levels of intensity. In vitro permeation by vitamin C was evaluated according to the specific conditions such as vibration intensity (levels 1, 2 and 3), application time (1, 3, 5, 7 and 10 min), and application power (500, 700 and 1,000 g). The highest permeation of vitamin C was observed at level 3 of vibration intensity, 5 min of application, and 1,000 g of application power. Vitamin C gel showed no cytotoxic effect against Pam212 cells or skin irritation effects. A pharmacokinetic study of the gel in rats was conducted under optimized conditions. The $AUC_{0-{\infty}}$ and $C_{max}$ increased 1.35-fold and 1.44-fold, respectively, compared with those after vitamin C gel without application with vibrating microneedles. The present study suggests that vibrating microneedles can be used to facilitate the skin permeability of vitamin C under optimal conditions.

• 공업화학전망
• /
• 제20권6호
• /
• pp.2-12
• /
• 2017

최근 피부산업은 미용적인 관점뿐만 아니라 피부질환치료에 대한 관심까지 폭넓게 성장하고 있어 피부의 건강을 개선하고 치료할 수 있는 새로운 신기술 개발이 다각적으로 이루어지고 있다. 특히 기술의 고도화와 체계화를 통한 피부과학기술의 진보가 화학, 화학공학, 재료공학을 기반으로 하는 전통학문분야와 조직공학, 바이오나노공학, 감성공학 등을 기반으로 하는 신학문분야가 융복합되어 이루어지고 있다. 따라서, 본 고에서는 피부산업에서 전략적인 응용이 가능한 피부 나노바이오 콜로이드의 연구개발에 대한 최근 현황을 소개하고자 한다.

• 대한화장품학회지
• /
• 제36권2호
• /
• pp.105-113
• /
• 2010

본 연구에서는 입자 크기 뿐만 아니라 베지클 멤브레인의 변형도를 조절할 수 있는 에토좀을 통해 약물의 경피흡수능을 향상시킬 수 있는 새로운 접근을 소개한다. 이를 위해 신규 육모효능성분인 Triaminodil을 포집한 에토좀을 제조하였고 입자 제조 후 추가적인 에너지를 가함으로써 입자의 크기를 조절하였다. 광산란법, 투과전자현미경, 멤브레인 변형도 측정 등을 통해 입자의 변형도가 입자 크기에 의존하는 것을 확인하였다. 또한 in vitro 피부흡수시험과 전임상 성장기 유도평가를 통해 베지클 멤브레인의 변형도가 Triaminodil의 피부 전달효능에 크게 영향을 미치는 것을 확인하였다. 이러한 결과로부터 담지 된 약물의 전달효능을 극대화 시킬 수 있는 최적 크기의 전달체 영역이 존재함을 확인하였고 이는 입자의 크기와 멤브레인 특성에 큰 영향을 받기 때문에 전달체를 설계하는데 있어 이 두 가지 요인을 고려해야 한다.